I like it because it will last a long time

Just as what I expected, it is not a bulky nor heavy jacket, ventilation is fine with soft texture, and I reckon it as a perfect jacket for daily commuting in shiny days. It is also carefully crafted and stitched, and the leather strips around the chest and shoulders help maintaining the fitment, I am quite satisfied with the overall built quality. The cutting is somewhat in between conventional Japanese brand slim fitment and European chubby fitment, I am 5'10" with a thick chest and I am wearing the XL one, it ends up with a very sweet body fit with my abdomen, chest and shoulders, but I wonder why the sleeves are an inch or two longer than it should be, despite the case that I have a pair of arms longer than the average person. The only downsides with this jacket are it does not come with the inseam vest and the protection pads are quite thin, although I love this item and would never regret with such a purchase, I would not say it is a good bargain, but it still worths every penny.View Detail

This is my first ever motorcycle jacket--the previous being just a thin polyester windbreaker. I'm probably 167cm tall and have light build. I chose size M and overall I am satisfied with way it fits me, even though it might seem a bit short as you can see in the photo.First ride 30km wearing it at about 2PM in sunny Borneo felt surprisingly almost like air-cond in a car as the wind blew gently through the mesh and over my skin. That is a mesh jacket for you.View Detail

Maybe it's because I'm getting older, but I don't want to wear something that looks like motorcycle wear with a big logo on it.
I'm starting to feel a little embarrassed when I get off Motorcycle (^^)

This product is OK in my opinion because the logo is only small on the sleeve!

It's just called UrbanMesh Parka (lol)

I'm not sure if it's a Design thing or a Cost thing, but Fastener claims it is.
Personally, I would have preferred to hide my teeth.

I am satisfied with the functionality of the product.
There are a lot of Pocket, and I appreciate that Chest Pad which tends to become Option in other companies is Standard Equipment.

Breathability is very good.
The fabric is quite firm. "Cool in P? LePera." It's not a thing like that.

The drink holder on the back is also very useful.

The Inner can be connected, so you can wear it even when it gets cooler, and the costumes seem to be high.

It's a good, clever product, typical of Raflo.View Detail

The arm part is pure white in the picture, but the actual color is Cream.
The overall color looks faded and different from Image.
To be honest, I was disappointed.

I won't put Objection in it because it's functional, but I don't think I'll buy it again.View Detail

[How did you feel about the Fit?
I'm 165cm with a normal build and the M is Just size.
The length of the dress and sleeves are perfect.
It was just right in the torso without any tabs, but I felt that it would be difficult to wear it inside because of that.

How was your experience with it?
The material is a bit stiff, but it is TradeOff because it does not flap in the wind.
It was very breathable and once I started running it was very cool and comfortable. That said, if the temperature was even a little cooler, it would feel too cool or even cold.
I even wore it after leaving it on the Seat for half an hour during a break at an outside temperature of 25-degrees to 27 degrees, and I hardly felt hot, probably because of the breathability.
It was unexpected that it was not hot even if it was blessed with sunlight at a traffic light. Is it because of the high shading property?

However, it's still a little hot when you walk around normally with it on……

[Was there anything that disappointed you?
This is no longer a problem for Wears below a certain price, but the edge of the Protector at the elbow often turns inside out when you pass your arm through it.
But after a month or so of rubbing it out, it went away.

The one I bought was black, but the fastener is silver, so it stands out a bit, which is a shame from a design standpoint. It looks like motorcycle wear (laugh).

What are the specs of the product, such as protector?
The chest, shoulders, elbows and Spine Pad are equipped as described. The Material is quite soft, so it doesn't stick out.

Each pad can be removed by peeling off the Surface Fastener on the lining side, so you can replace them with optional items or wash them.View Detail

Purchased for regular replacement.
If it were a little cheaper, I could get a stable replacement...View Detail

?attachment
The CBR650R is mounted at the same position angle as the NORMAL.
However, when the handlebar was cut to the Left lock, it interfered with the interior cover next to the Meter, so the interior cover was cut away.
I also purchased a 45° angled banjo adapter for the mesh hose to accommodate the tension of the mesh hose.
・NORMAL (Reserve integrated horizontal master) Impressions of
No complaints on public roads. Familiar feel and very easy to handle.
However, when the brake is set to "hard brake," the rate of increase in braking force relative to the input seems to decrease, and the brake becomes more forceful.
Radipon (Reserve separate body portrait master) Impressions of
It was totally different from what I expected, my expectation was that it would feel like a Rear brake…
It is really a mild and easy-to-handle radipon.
On public roads, it feels like NORMAL! I wonder if it's because NORMAL is the same NISSIN?
But I felt the radipon effect from Breaking a little stronger, and
It can be hung up to a hard brake without effort.
I felt trust that this could stop.View Detail

I purchased this for use with multiple Helmets. 。
Mount included with the BOLD.
Microphone and speaker are not included and must be purchased separately.View Detail

Grip that had been used for a long time was worn out and had to be replaced.
They are soft and dampen vibration.View Detail

[How is it used?
Used to lick Screw loose.

Was the one you received as per Image?
As per Image.

How was your experience with it?
When used on a strongly tightened Screw, it can be safely and securely removed.
The licked Screw was removed.

It is also useful for DIY Screw removal.

[Points to note]
When used on a licked Screw, it is best to beat it in with a Hammer before use.View Detail