I installed the Under Cowl on the GSX-S1000
I installed the Twill Carbon
I think it's built to be much lighter than the OEM Cowl
Unless you are using the Full Exhaust System, these are just the parts you need to attach to your car
It's just like Magical Racing
The bottom of the OEM Under Cowl is open, and the air resistance seems to be Large
My motorcycle has been converted to a Wyvern Full Exhaust System Because of this, some processing was required
It became the work while fitting many times, but I think it is very good that we can finish it with the smallest processing I think it was done
The machining area is the front exhaust pipeQuantity:Since the exhaust system part of 2pc and the rear exhaust system interfered, it cut and processed a little with File It was
Other than that, there is no large interference, and the lower exhaust pipe assembly and the catalytic converter (lunch box) There was no interference from Under Cowl
Reuse OEM rubber bushes and install with the supplied bolts and washers I will
I had to take it off and on many times when processing, but because it's carbon, it's relatively flexible and easy to put on and off! It was
I went for a run on the pass and didn't have enough bank angle to rub it
I tried a little Speed at high speeds and the air flowed nicely with less flapping underfoot I have the impression that there are
It is shaped like an oil pan, but it is not a race, so it looks like a race I was wondering if it has become ish
Fits: HONDA CB400SF 03-15|18 *Not available for 2016-2017 models due to catalyst change
High quality belly pan. Arrived with poor paintjob likely due to old stock, had to sent it for spraying, which worked fine as i wanted a custom design anyways. The brackets provided are high quality as well. Do note for Spec III, mainstand can't be used with bellypan installed, need it removed then you're able to use the mainstand.View Detail
Fits: HONDA CB400SF 03-15|18 *Not available for 2016-2017 models due to catalyst change
Fitted on a CB400SF 2016. Painted in red candy to match the bike.Pros:- Look: Just great, it fits the bike perfectly.- Quality: Amazing - 5*-Fitment: Perfect - 5*Cons:-The attach/straps could be of better quality. They are a bit weak and prone to crack if you tighten too much. Why carbon when steel or aluminum would be way better.-THe belly is very low. I already smashed it once and got it repaired. I scratched it again. So just be careful with that. We are lucky not to have too many high speed bumps in Australia but still have to be careful.View Detail
Fits: HONDA CB400SF 03-15|18 *Not available for 2016-2017 models due to catalyst change
Magical Racing 下導流罩,適用於CB400SF車型, 讓愛車有效避免排氣管因路面高低起伏產生的刮傷而且增加愛車的美觀創造出不同的風格,Magical Racing 下導流罩固定方式相當方便DIY,可以隨時改變愛車的風格,推薦大家選購安裝!----------------------------------------------Under Magical Racing shroud for CB400SF car, make your car exhaust pipe effectively avoid the ups and downs due to the road surface scratches produced and increase the aesthetics of the car to create a different style, Magical Racing under the shroud fixation fairly easy DIY, can always change the style of the car, we recommend to buy the installation!Powered by Google TranslatorView Detail
Fits: HONDA CB400SF 03-15|18 *Not available for 2016-2017 models due to catalyst change
[How is it used?
I've wanted an Under Cowl for a long time, and I took the plunge and bought one! I knew it would be inconvenient for my use, but I wanted it anyway, so I didn't care.
Was the one you received as per Image?
As per Image, the packaging was well done and the quality was decent. I was surprised that it took a little over a month to receive the product, although I was originally told that the delivery time would be 4 months.
Was the installation difficult?
I had to do a little work, but I bought it knowing it was not compatible, so if it was, it would be very easy to put on.
How was your experience with it?
Inconvenient!
[Included Parts:were they on?
Included Parts:were all firmly attached!
[Was there anything that disappointed you?
Nothing in particular, Magical racing things are good indeed.
Other items that would be helpful
If you use some Tie Wrap, you can install the Point of Installation or hang 2016 CB400SF. You can do it!View Detail
Fits: HONDA CB400SF 03-15|18 *Not available for 2016-2017 models due to catalyst change
I put it on spec3.
I had replaced it with a WR'S Full Exhaust System, but I was able to do it without any modification.
I'm not very good with my hands and it took me about an hour.View Detail
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING