?
Looks like you access from European region.
Would you shop at webike.eu.com?
It's fine
Installation is not difficult and very easy
The mounting part is also very universal and has a high degree of universalism
I think it can be installed on basically any bracket
The installation takes 5 to 15 minutes to complete
You'll need a small Phillips Screwdriver to install it, so you'll need to use a small Phillips Screwdriver to install it is a caution
Helpful?0
For use with Boxes
I purchased a base plate so that I can use the GIVIRear box already installed on my motorcycle on my new motorcycle.
If you purchase a new rear box, the base plate is included, but with these parts, you can use multiple boxes in your fleet.
For Repair, but I would appreciate it if you could sell Plate etc. Parts if I own several cars.View Detail
Helpful?
For KAPPATop case installation
Used to install KAPPA Top case
Everything is the same except for the Logo, so installation parts can be used in the same way.View Detail
Helpful?
Board between Top case and Carrier
[How is it used?
I purchased this product to be able to install GIVI's Top case on several Motorcycles I own.
Top case of GIVI (E300) When I first purchased the This is very convenient!" I bought several Base pedestals so that I could use one Top case for all the motorcycles I owned at that time, and later I bought additional Base pedestals for E350, E450, etc. in the middle size and Large capacity size (of course, Base pedestals are also available in Quantities:The base pedestal was left over because of the (I eventually gave it to a friend who uses it in a similar way.)
Did you receive the item as per the Image?
At the time of purchase of this product "Wide" The size was not on the lineup, and since it is the Standard Base pedestal that comes with every new GIVI MonoLock type Top case, the product arrived as per the very familiar Image.
How did you like it?
Top case until then (Rear box) was often attached to the SUPER CUB Type directly attached to the Rear Carrier. Because I only knew the Rear box of the The top case can be removed with one-touch and replaced with any mono-lock type top case from the same manufacturer. The "M" spec. was a breakthrough.
Since the time of my purchase. It's not unlike GIVI." is out there, and once I went out and installed that product (Locked firmly to the Base pedestal as in GIVI's Top case) The lock disengages and falls while driving. (Fortunately, there were no following vehicles.) Black history of GIVI and its similarity, but the lid of the Top case was broken into two pieces! (Although not similar to GIVI, the Base pedestal was identical in all dimensions to the one made by GIVI, just without the surface lid.) 。
How did it compare to other products?
Top case made by GIVI as above and It's not unlike GIVI." I have only used Top case, so I cannot compare it with other companies' Top case.
Not only Webike, but most motorcycle accessory stores carry the top case&selling Option Parts, so you can't help but choose GIVI because of the ease of purchase.
[Points to note]
Not particularly
If you have many vehicles to install for the Top case you own, simply purchase as many of this product as you need.
Other items that would be helpful
【Included Parts:presence or absence】.
Base Pedestal Body, Bolt&Nut for fixing, each Washer and Corrugated Plate are included.
[ITEMS TO BUY TOGETHER
In cases like the above, it is assumed that the customer owns the necessary Top case, so this product alone should be sufficient.
[Opinions and requests to Manufacturer
Top caseQuantity:Not only Set, but also a wide variety of Option (Repair) GIVI has answered the needs of Users with its lineup of Parts, and we look forward to working with them in the future.View Detail
Helpful?
Convenient for GIVI use!
[How is it used?
I purchased the Rear box to use and share with two Motorcycles I own.
Was the one you received as per Image?
The quality is as good as the Image as it is an additional purchase from the original.
Was the installation difficult?
Can be installed with 4 BoltScrews.
It is necessary to devise a way depending on the shape of the Carrier, but since it is highly universal, it can be attached to most of the Large Carriers.
How was your experience with it?
It is very convenient because it can be used on two Motorcycles. It used to be very troublesome to replace the base every time, but now you can install it with One-touch when you think of it and go out easily.
[Included Parts:were they on?
In addition to the Body, Bolt and Bracket for fixing are attached.
[Was there anything that disappointed you?
Material:Since it is Plastic, it is likely to eventually crack over time.
However, it occupies a lot of space when storing it and it becomes luggage, and it is hard when riding if a box is always attached, so we decided to use Base only this time.View Detail
Helpful?
Base for Mono-lock case
I need to use GIVI's Mono-lock case for multiple motorcycles, so I bought an additional one.
Thanks to this component, Case is now available for Scooter and MONKEY.
GIVI's Mono-lockSeries can be used for a long time to come because of its common Base.View Detail
Helpful?
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING