What made you decide to buy?
I was thinking of buying a smartphone holder for the first time, and people around me were using a quad lock I was going to buy that one when I saw it was available, but the delivery time was long because they didn't have it in stock I decided to go with this product
How was your experience with it?
I use it on my IPhone SE (2nd generation)
I keep it in this Case for everyday use, but it's nice because it's thick enough that I don't have to worry about it on a daily basis
I actually installed it on my motorcycle and it is easy to install
I was impressed with how easy it was to remove
A typical smartphone holder is a smartphone holder that is held down by SIDE or other means and But I don't like it, and I don't like this kind of system I wanted to use it as a Smartphone Holder, but it's really such an Attachment And you can't get it?
So I grabbed my Bracket, attached my phone to it, and
I was buzzing around, but..
This is amazing! It was safe
Bracket was also good in a fashionable way, but there were two things that bothered me
The first point is that I'm attaching it to the LeftHandlebar, and the SP CoNECTO letters are It would be the other way around! (I don't think it's reversed depending on how you install it, but with the basic way of putting it on, the direction is opposite (I'm concerned about the
The second point is that the Y axis cannot be changed
This Bracket has two moving parts, but both of them are on a horizontal axis It gets attached to the condition
I have a mirror hole in the left-rebar clamp part of the separate handle Type, so I'm co-tightening there
It's different for each motorcycle, so it's not all bad is a point of interest
But with a Waterproof Cover, Phone Cover, and Bracket, this is a great deal For the price, it would be a good cosmetic
It's an iphone SE2 and the quality of the Button part is too bad.
The Volume Button in particular is the worst, and I think it's quite frustrating not being able to get the desired volume.
In addition, the volume is turned up to the max by itself just by touching it a little.
For those reasons, I use a different Case for everyday use, of course.
If you make a mistake when fitting the Mount, the lock mechanism part may become slanted, and you can't put it back without using the STANDTool included. Therefore, you need to carry STANDTool with you at all times.
It looks Refreshingly very good, but...View Detail
I had no problems with STANDBody.
However, because the groove on the volume Button side of the originally tighter Smartphone Case is shallow (there was sufficient depth on the Power Button side), or perhaps because the Button is pressed just by lightly touching the Volume Button.
I was FloatFloating on my first PetitCustom since I got my license in the summer, and without realizing it, I took to the public roads as soon as I could.
A few minutes after I started driving, I had a problem. The Button must have been pushed in by a vibration or something, and while driving, Income suddenly heard the Navigation voice at the highest volume. I was about to cause an accident.
I don't even want to return it because it's pricey and it's my first Custom, so I don't even want to receive a Large Kiku Shock.View Detail
Until now, Material:I bought and tried several Plastic's Smartmount, but the vibration of the Engine resonates on the liter four-cylinder (GSX-S1000F) and the chirping noise is severe at certain RPMs, so I decided to buy the SP CoNECTO MotoBundle.
I was able to install it with the attached hexagon. I was able to fine-tune the angle more closely than I expected, so I was able to place the Mount in the middle of the Top Bridge as shown in the photos. When I installed it, it looked very stylish without the phone on it. In addition, there was not at all about the rattling sound that I was worried about with other Mount even if the smart phone was installed or not.
And since the phone cover itself is part of the Mount, it is easy to install it with only 90-degrees of twist. It is very convenient because you have to remove your phone every time you get in and out of the car. I had no worries about dropping it, even when using it at high speeds. The only thing that makes it more expensive is the Neck, but it's worth it and I would recommend it.View Detail
There is no protrusion at all at the back, so it's hard to rattle it even if you put it on a table
This type of Mount is bundled in the Compact of this type, and either the vertical axis or the horizontal axis is I attached it to the HandlebarCenter because it can be difficult to move it
If you use Center, you can find a JUST size by just adjusting the clamp section Recommendation
It was very helpful to have the Cover included as I ride in the rain
I used it in a downpour and my phone didn't get wet at allView Detail
It is easy to put on and take off
I was complaining about not being able to charge it when I did my rain cover, but I also thought about drilling a hole in it so I could charge it However, the rainwater invaded the USB power supply on a rainy day and made it unusable I was understandably convinced
Isn't there a USB power supply that can be used on rainy days?
As for durability, I don't know yetView Detail
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING