4.37 USD
(661 JPY)
5 (1 Reviews)
rating breakdown
5 Stars |
|
1 |
4 Stars |
|
0 |
3 Stars |
|
0 |
2 Stars |
|
0 |
1 Stars |
|
0 |
Excellent
It can be used normallyWhen you install the Air Compressor in Garage, you'll need it to connect to Reel, and you'll be able to use it to get the Air Compressor to work It is a normal Coupling with no special features There is no special feature, and it is a normal Coupling They're giving me
Most Viewed Reviews Of SIGNET Other Tools
Average
Screw CutterI use the ratchet type for re-tapping screw threads that are out of alignment and for drilling new screw holes, because it is easier to use.
Although it is used only occasionally, it is useful in many ways to have 1 pc.View Detail
Very Good
Comes off easily.I used it to remove a sticking Hose.
The Hose can be easily removed without much effort.
It is slightly thicker at the tip, so it would be easier to use if it were thinner.View Detail
Average
Easy to useIt is possible to pull out the hose from the Pipe without any difficulty.
It does not damage the hole.
It is safe to useView Detail
Very Good
It's easy to get out.It is effective for old or heat hardened negative pressure hose and waterline hose, and it can be pulled out from the pipe without straining the hose and pipe.View Detail
Very Good
I just wish I'd known about it sooner.The Hose that had been somehow removed by Pick tool and Pliers etc. can be easily removed.
It's such a shame that I didn't have the opportunity to learn about the existence of these tools.
Because the thickness of the tip is a certain amount, it is not possible to remove anything from the beginning only by this, but if you can shift the Hose by Pick tooletc. to some extent, the rest is easy.
It's a little expensive for a simple system, but I don't mind because the effect I get is Large.
Well, if I had to make an order, I would have wanted it to be thinner.
Anyway, you should have one in your toolbox. It increases both work efficiency and safety.View Detail
Other Reviews From Japanese Webike user
Excellent
Radipon handled in Mild?attachment
The CBR650R is mounted at the same position angle as the NORMAL.
However, when the handlebar was cut to the Left lock, it interfered with the interior cover next to the Meter, so the interior cover was cut away.
I also purchased a 45° angled banjo adapter for the mesh hose to accommodate the tension of the mesh hose.
・NORMAL (Reserve integrated horizontal master) Impressions of
No complaints on public roads. Familiar feel and very easy to handle.
However, when the brake is set to "hard brake," the rate of increase in braking force relative to the input seems to decrease, and the brake becomes more forceful.
Radipon (Reserve separate body portrait master) Impressions of
It was totally different from what I expected, my expectation was that it would feel like a Rear brake…
It is really a mild and easy-to-handle radipon.
On public roads, it feels like NORMAL! I wonder if it's because NORMAL is the same NISSIN?
But I felt the radipon effect from Breaking a little stronger, and
It can be hung up to a hard brake without effort.
I felt trust that this could stop.View Detail
Very Good
packtalk bold Attached MountI purchased this for use with multiple Helmets. 。
Mount included with the BOLD.
Microphone and speaker are not included and must be purchased separately.View Detail
Excellent
Grip replacementGrip that had been used for a long time was worn out and had to be replaced.
They are soft and dampen vibration.View Detail
Very Good
Works well in everyday life[How is it used?
Used to lick Screw loose.
Was the one you received as per Image?
As per Image.
How was your experience with it?
When used on a strongly tightened Screw, it can be safely and securely removed.
The licked Screw was removed.
It is also useful for DIY Screw removal.
[Points to note]
When used on a licked Screw, it is best to beat it in with a Hammer before use.View Detail
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING