37.45 USD
(5,667 JPY)
23.56~ USD
(3,565 JPY)
(37% OFF)
4.1 (34 Reviews)
rating breakdown
5 Stars |
|
0 |
4 Stars |
|
0 |
3 Stars |
|
0 |
2 Stars |
|
0 |
1 Stars |
|
0 |
Excellent
Not only is it cheap, it's surprisingly durableI was worried about the performance because of the price, but it's not a problem at all
I feel like an idiot for having bought an overpriced ZETA until now
I've fallen over 30 times since I put these on and haven't had any problems
Reviews For POLISPORT Handguard Evolution Integral with Mounting Kit From Other Webike User
Excellent
Good thing it's so light!It was cold, so I warmed up with Dryer to prevent the plastic from cracking. It was cold, so I worked with Dryer to warm up the plastic so that it would not crack.
My RALLY50 had a grip heater from the moment I bought it, and the handlebar was open end, so I didn't have to modify it.
It doesn't weigh much, so I didn't feel uncomfortable handling it at all.
The only thing is that theAdapter is a little bit sweet, or the quality is bad, or the way you put it on is bad, or it seems to come loose…wow? I think it's like this.
Well, I guess the worst that can happen is that I'll just buy another Adapter and be done with the costumes!
Two-tone color Guard in White and Black will fit RALLY50, I think!View Detail
Average
Recommendation for those who can cut and shave.The car is a CRF250M and the Handlebar is used for ZETA's CX Handlebar.
It is not the same as the Hand guard with a frame, but it is not the same as the FirmlyGuard! However, it protects your fist from the wind and small stones. The area is small, but the way your hands get cold in winter is somewhat better than the No Guard. It is somewhat better than NoGuard in winter.
Because this is a universal product, it may take some time to install it. The installation method is quite simple, so there is no problem.
In the case of my CRF, Clutch Side was able to be installed easily. As for Brake Side, the throttle wire interfered with the product image, if you compare the photograph and the product image, you will understand, but I shaved a "mountain".
I made it easy with Grinder, but the Material is so soft that I think I can get away with hand saws and File.
By installing it, you can get more volume in the car and the off-road feel is much better.
The price is low, and it can be installed with a little effort. The color is also available in each manufacturer's image color, and it is recommended.View Detail
Excellent
This is so cosy!I installed it on my Yamaha WR250R.
Made of plastic, it is light, fashionable and strong in color.
It's easy to use.
I bought a separate adapter to attach it to the WR, but it only takes about that long.View Detail
Very Good
It's too tight for SEROW as it isWhen I try to put it on SEROW, Brake line and Wiring interfere with each other
I can't install it in the position I want
So, I used ZETA's Clamp and drilled holes and cut the edges of the products
I was forced to put it onView Detail
Most Viewed Reviews Of POLISPORT Hand / Knuckle Guards
Excellent
Hand guard partsI never expected to find the Poly sports hand guard repair parts I was looking for on Webike.
I was thrilled because I had given up halfway through.View Detail
Excellent
The round design is good for the round light SEROW!Originally, it was a round line SEROW, so I really liked the matching round design of this product.
There is no interference with the wiring around the handlebar because the mounting bracket is U-shaped. It can be installed without any problem.
I'm not sure if this is the case with the SEROW itself. The brake hose is assembled parallel to the Handlebar, so I think other products will have the same situation.
I installed a bracket on the front fork of the brake side to prevent the guard from coming up when the bike falls. I made a bracket for the front fork bolt.
I don't know how useful it is, but I think it's Large durable enough for low impact falls.
The product is made in Portugal, solid, beautiful, and the plastic guard is thick and sturdy.
I'm going to run only Flat forest roads for a while to avoid wearing Wound (lol)View Detail
Excellent
Good thing it's so light!It was cold, so I warmed up with Dryer to prevent the plastic from cracking. It was cold, so I worked with Dryer to warm up the plastic so that it would not crack.
My RALLY50 had a grip heater from the moment I bought it, and the handlebar was open end, so I didn't have to modify it.
It doesn't weigh much, so I didn't feel uncomfortable handling it at all.
The only thing is that theAdapter is a little bit sweet, or the quality is bad, or the way you put it on is bad, or it seems to come loose…wow? I think it's like this.
Well, I guess the worst that can happen is that I'll just buy another Adapter and be done with the costumes!
Two-tone color Guard in White and Black will fit RALLY50, I think!View Detail
Average
Recommendation for those who can cut and shave.The car is a CRF250M and the Handlebar is used for ZETA's CX Handlebar.
It is not the same as the Hand guard with a frame, but it is not the same as the FirmlyGuard! However, it protects your fist from the wind and small stones. The area is small, but the way your hands get cold in winter is somewhat better than the No Guard. It is somewhat better than NoGuard in winter.
Because this is a universal product, it may take some time to install it. The installation method is quite simple, so there is no problem.
In the case of my CRF, Clutch Side was able to be installed easily. As for Brake Side, the throttle wire interfered with the product image, if you compare the photograph and the product image, you will understand, but I shaved a "mountain".
I made it easy with Grinder, but the Material is so soft that I think I can get away with hand saws and File.
By installing it, you can get more volume in the car and the off-road feel is much better.
The price is low, and it can be installed with a little effort. The color is also available in each manufacturer's image color, and it is recommended.View Detail
Very Good
Exactly to Hand guard for the first timeWhat made you decide to buy?
I bought this product because I was advised by my friends that I should have a hand guard for off-road racing. I've never used a hand guard before, so I didn't know how to choose one, and I chose this one because the price was cheap and the reviews didn't look too bad.
How was your experience with it?
I fell many times during the off-road race and the hand guard did not break and protected the lever very well.:It's Plastic, but it seems to have some strength to it.
Also, Material that seems to have strength.:Being lighter than the aluminum Hand guard, the Handlebar also felt lighter to handle.
Was the installation difficult?
I put the hand guard on for the first time, and it was Large strange to fasten the clamp part while dodging the wiring and so on.
【Please tell me the installation point and hang】
At first, the clamp part didn't fit on the Handlebar at all and I was in a hurry, but it's plastic and flexes well, so you can bend the hand guard to fit the shape of the Handlebar without any problems.
[Was the Instruction Manual easy to understand?
The instruction manual is in English version, so I don't understand the explanation well. I was able to install it with only a diagram because there is a diagram in every process.
[Included Parts:were they on?
All the necessary parts for installation are included, and the inner diameter of the handlebar is wide enough to fit most large handlebars.
[Was there anything that disappointed you?
None in particular. The strength was enough for the price, so I'm satisfied with the cosmetics.
Do you have any wishes or improvements you would like to make for the Manufacturer?
It's a foreign product, so I thought it would be like this.
[Do you have any products to compare it to?
None because it's my first product.View Detail
Other Reviews From Japanese Webike user
Excellent
Radipon handled in Mild?attachment
The CBR650R is mounted at the same position angle as the NORMAL.
However, when the handlebar was cut to the Left lock, it interfered with the interior cover next to the Meter, so the interior cover was cut away.
I also purchased a 45° angled banjo adapter for the mesh hose to accommodate the tension of the mesh hose.
・NORMAL (Reserve integrated horizontal master) Impressions of
No complaints on public roads. Familiar feel and very easy to handle.
However, when the brake is set to "hard brake," the rate of increase in braking force relative to the input seems to decrease, and the brake becomes more forceful.
Radipon (Reserve separate body portrait master) Impressions of
It was totally different from what I expected, my expectation was that it would feel like a Rear brake…
It is really a mild and easy-to-handle radipon.
On public roads, it feels like NORMAL! I wonder if it's because NORMAL is the same NISSIN?
But I felt the radipon effect from Breaking a little stronger, and
It can be hung up to a hard brake without effort.
I felt trust that this could stop.View Detail
Very Good
packtalk bold Attached MountI purchased this for use with multiple Helmets. 。
Mount included with the BOLD.
Microphone and speaker are not included and must be purchased separately.View Detail
Excellent
Grip replacementGrip that had been used for a long time was worn out and had to be replaced.
They are soft and dampen vibration.View Detail
Very Good
Works well in everyday life[How is it used?
Used to lick Screw loose.
Was the one you received as per Image?
As per Image.
How was your experience with it?
When used on a strongly tightened Screw, it can be safely and securely removed.
The licked Screw was removed.
It is also useful for DIY Screw removal.
[Points to note]
When used on a licked Screw, it is best to beat it in with a Hammer before use.View Detail
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING