1.47~ USD
(223 JPY)
4 (10 Reviews)
Poor
I'm not very good at finishing or anything.Pulling a lathe by myself is a pain in the ass!
It's helpful to have these things on sale when I'm in a bit of a bind.
Sometimes I wish I had a few more thicker lineups, but I'm just thankful that they have this stuff available as a ready-made product.
Every time I use this kind of thing, I think to myself that I should thank the Manufacturer before I complain about anything.
Reviews For K-CON Aluminum spacer for M10 Screw From Other Webike User
Very Good
Anyway, it is a goods in time.This KITACO's ConveniencePartsSeries is a good enough for anyway.
Size suitable for the gap is so abundant that I always buy Washer, Color etc.
The appearance and the material are very beautiful with Aluminum.View Detail
Very Good
SizeI struggled to find Size. I was looking for M12's ColorWasher, but because I could not find it, I bought this item of M10. Because it is Aluminum it is easy to process and you can also Anodized.View Detail
Excellent
Sus SettingI bought to hang Pre-road on Spring of Front suspension. Originally I used several Washers in layers.. The opportunity to release Front fork is twice a year at most, but WasherSpec. It was troublesome to organize it, but thanks to this Spacer I got easier.
View Detail
Excellent
Used to extend Skid PadAlthough I thought to divert Skid Pad for other models, when I installed it, the engine is projecting beyond the tip of the Pad.....
I searched Net for a way to master it, encounter this product. You can use this guy.
It is mere Aluminum Spacer, but it is likely to be used for various purposes only with good processing accuracy, simple.
Also, if you want to add something strange, you might want to add more.View Detail
Average
Caliper support and Caliper Clearance securedWhen Caliper was installed in Caliper support made by One-off, Caliper and Support interfere somewhat and it was not able to install properly. As a result, we purchased 2 mm of Color, and it was possible to install it securely and without interfering.
Webike is very convenient because Small items such as Bolt and Color can be ordered easily without hesitation.View Detail
Most Viewed Reviews Of K-CON Color Spacer Shims
Excellent
Fantastic...These small spacers are fantastic! The finish on the anodising and precision of the maching is perfect and they come in these wonderful little packages that are a joy to look at.They were great value too, compared to other options I looked at.Would highly recommend these if you are looking for spacers.View Detail
Excellent
好用的配件这款webike购买的K-CON 防振橡皮是用来替换我摩托车上已经老化开裂的橡胶垫的,我找了很久才在webike上面找到它,规格大小描述的很清楚,接下来就是希望它耐用不会很快就裂开了。View Detail
Excellent
Used for Cowl fastening points[How is it used?
Used at the fastening point of Under Cowl.
How was your experience with it?
This Rubber Collar is placed between the collar and the part that is fastened with Bolt to fix the Cowl.
Cowl's Wobble will be suppressed.
It's easy to get at the supply store and is very helpful.View Detail
Excellent
I'm trying to get Lever to stop rattling![How is it used?
We are playing Enduro with Off-road motorcycle.
I was looking for something like a Shim for my Clutch lever, and I found this product. And I bought it.
Was the one you received as per Image?
As per Image
Was the installation difficult?
Remove the Pivot and after cleaning, apply a thin coat of Grease and insert the Shim here and you're good to go.
How was your experience with it?
The lever that was moving up and down stopped moving and became able to cut smoothly.
I'm happy with the Large variant because of the way I run and play with the Clutch a lot.
[Included Parts:were they on?
Not particularly
[Was there anything that disappointed you?
Not particularly
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
Measure the shaft diameter of your Pivot before you buy it. I made a mistake once and bought an M6.
ZETA's Clutch perch was an M8.View Detail
Other Reviews From Japanese Webike user
Excellent
Radipon handled in Mild?attachment
The CBR650R is mounted at the same position angle as the NORMAL.
However, when the handlebar was cut to the Left lock, it interfered with the interior cover next to the Meter, so the interior cover was cut away.
I also purchased a 45° angled banjo adapter for the mesh hose to accommodate the tension of the mesh hose.
・NORMAL (Reserve integrated horizontal master) Impressions of
No complaints on public roads. Familiar feel and very easy to handle.
However, when the brake is set to "hard brake," the rate of increase in braking force relative to the input seems to decrease, and the brake becomes more forceful.
Radipon (Reserve separate body portrait master) Impressions of
It was totally different from what I expected, my expectation was that it would feel like a Rear brake…
It is really a mild and easy-to-handle radipon.
On public roads, it feels like NORMAL! I wonder if it's because NORMAL is the same NISSIN?
But I felt the radipon effect from Breaking a little stronger, and
It can be hung up to a hard brake without effort.
I felt trust that this could stop.View Detail
Very Good
packtalk bold Attached MountI purchased this for use with multiple Helmets. 。
Mount included with the BOLD.
Microphone and speaker are not included and must be purchased separately.View Detail
Excellent
Grip replacementGrip that had been used for a long time was worn out and had to be replaced.
They are soft and dampen vibration.View Detail
Very Good
Works well in everyday life[How is it used?
Used to lick Screw loose.
Was the one you received as per Image?
As per Image.
How was your experience with it?
When used on a strongly tightened Screw, it can be safely and securely removed.
The licked Screw was removed.
It is also useful for DIY Screw removal.
[Points to note]
When used on a licked Screw, it is best to beat it in with a Hammer before use.View Detail
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING