14.35 USD
(2,171 JPY)
13.68~ USD
(2,071 JPY)
(5% OFF)
4 (24 Reviews)
Very Good
When the Grip heater is installedThe SEA BASS OEM Throttle is engraved with a Giza Giza and Rib to prevent the Grip from shifting.
I'm too lazy to shave off the Rib, so this Teflon (R) Use the Inner Pipe to attach the Grip heater.
It's a little pricey, but it's convenient because you can choose the diameter of the windings, so you can make it Large, which is close to OEM, or you can make it a little High Solo.
Reviews For ACTIVE Teflon Inner Pipe From Other Webike User
Excellent
ACTIVE teflon inner throttle pipe/grip in use with ACTIVE aluminium throttle holderI installed this teflon inner pipe together with the ACTIVE aluminium throttle holder with the 2 fast throttle cables to operate the Yoshimura TMR-MJN40 racing carburetor. the size that i have chosen is the 40mm (which is the maximum for the ACTIVE throttle holder Type-2). It is a straight forward and easy installation, and after sucessful installation, the grip, the throttle response and operation of the TMR-MJN carburetor is much better and livelier. highly recommended upgrade even it is for normal carburetors. View Detail
Very Good
The diameter of the inner pipe can be changed.This time I needed it for radiphone purposes, not for High Solo. I chose the Φ40, which is almost the same as the NORMAL, with the same throttle response.
If you don't like the accelerator operation at low speeds to become severe and difficult to ride, this is Recommendation.View Detail
Very Good
Used to change the winding diameterI used it to change the winding diameter of Active's High Solo.
I wanted to make my Solo more High Solo than the diameter that came with it, so I bought the Large diameter ones.
I'm not a big fan of the High Solo, but it's not as easy as it should be.View Detail
Excellent
I'd like you to add some more informationDepending on the vehicle, you don't have to purchase the throttle holder separately, but you can use the OEM housing to make the vehicle more comfortable It may be available
It is an indispensable part of the setup when changing the carburetor, and it is easy to change the opening angle It's nice to be able to I bought several sizes in bulk
In addition to the rewind diameter, information on the thickness of the Thailand-coated part and the length of the Grip part is It would be useful if it was listed
View Detail
Most Viewed Reviews Of ACTIVE Throttle Tube
Excellent
ACTIVE teflon inner throttle pipe/grip in use with ACTIVE aluminium throttle holderI installed this teflon inner pipe together with the ACTIVE aluminium throttle holder with the 2 fast throttle cables to operate the Yoshimura TMR-MJN40 racing carburetor. the size that i have chosen is the 40mm (which is the maximum for the ACTIVE throttle holder Type-2). It is a straight forward and easy installation, and after sucessful installation, the grip, the throttle response and operation of the TMR-MJN carburetor is much better and livelier. highly recommended upgrade even it is for normal carburetors. View Detail
Very Good
The diameter of the inner pipe can be changed.This time I needed it for radiphone purposes, not for High Solo. I chose the Φ40, which is almost the same as the NORMAL, with the same throttle response.
If you don't like the accelerator operation at low speeds to become severe and difficult to ride, this is Recommendation.View Detail
Very Good
Used to change the winding diameterI used it to change the winding diameter of Active's High Solo.
I wanted to make my Solo more High Solo than the diameter that came with it, so I bought the Large diameter ones.
I'm not a big fan of the High Solo, but it's not as easy as it should be.View Detail
Excellent
I'd like you to add some more informationDepending on the vehicle, you don't have to purchase the throttle holder separately, but you can use the OEM housing to make the vehicle more comfortable It may be available
It is an indispensable part of the setup when changing the carburetor, and it is easy to change the opening angle It's nice to be able to I bought several sizes in bulk
In addition to the rewind diameter, information on the thickness of the Thailand-coated part and the length of the Grip part is It would be useful if it was listed
View Detail
Other Reviews From Japanese Webike user
Excellent
Radipon handled in Mild?attachment
The CBR650R is mounted at the same position angle as the NORMAL.
However, when the handlebar was cut to the Left lock, it interfered with the interior cover next to the Meter, so the interior cover was cut away.
I also purchased a 45° angled banjo adapter for the mesh hose to accommodate the tension of the mesh hose.
・NORMAL (Reserve integrated horizontal master) Impressions of
No complaints on public roads. Familiar feel and very easy to handle.
However, when the brake is set to "hard brake," the rate of increase in braking force relative to the input seems to decrease, and the brake becomes more forceful.
Radipon (Reserve separate body portrait master) Impressions of
It was totally different from what I expected, my expectation was that it would feel like a Rear brake…
It is really a mild and easy-to-handle radipon.
On public roads, it feels like NORMAL! I wonder if it's because NORMAL is the same NISSIN?
But I felt the radipon effect from Breaking a little stronger, and
It can be hung up to a hard brake without effort.
I felt trust that this could stop.View Detail
Very Good
packtalk bold Attached MountI purchased this for use with multiple Helmets. 。
Mount included with the BOLD.
Microphone and speaker are not included and must be purchased separately.View Detail
Excellent
Grip replacementGrip that had been used for a long time was worn out and had to be replaced.
They are soft and dampen vibration.View Detail
Very Good
Works well in everyday life[How is it used?
Used to lick Screw loose.
Was the one you received as per Image?
As per Image.
How was your experience with it?
When used on a strongly tightened Screw, it can be safely and securely removed.
The licked Screw was removed.
It is also useful for DIY Screw removal.
[Points to note]
When used on a licked Screw, it is best to beat it in with a Hammer before use.View Detail
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING