?
I used to have the AdventureGuard, but it didn't fit well and I switched to this one. I like the design of this one better.
Beautiful product of high quality and build with good material. Fits well on stated handlebar and colours are made to suit OEM colour. Boought them for replacement of an older pair due to a skid. A really tough handle this is as it protects my bike well from the skid. Thunbs up for this product.View Detail
Hello. I decided to deliver Armor Handguard Bend on the Kawasaki KLX250S, what to protect hand soy in case of collision. It is very difficult to Armor Handguard Bend to set in a standard wheel which was set at plant. I had to cut a thread, what to zakutit there bolts which retain protection, it took 4 hours of my time. Very high-quality execution. The price could be lower. I recommend this product for use.View Detail
ZETA Armor Handguard Bend looks great after fixing this with ZETA X 2 Protector to WR250X Yamaha,makes bike look big, excellent material never stains,average weight so very hardy,and nice looking for 7/8\ handle bar,and I had a doubt whether there are nail holes to fix protectors,and there are ready-made holes, I 100% satisfied with this product,Thanks Webike.View Detail
[How is it used?
D Tracker, used on FTR223.
Mainly used to protect the front brakes master and clutch lever in the event of a fall during circuit driving and motard racing.
D Tracker allows you to set the Quantity for practice runs and for race outfits.:2 SetThey were using different methods. (For practice runs, I use the one that has been torn to shreds from falling over a lot. It's a waste of money to change to a new one, so I keep using the battered one for practice).
The handlebar was attached to a Renthal, ZETA φ22.2.
Was the one you received as per Image?
Anodized color as per image (Black) The Bent was just as I had imagined it would be. The body is also made of a solid aluminum bar, and I don't think it would break even if it fell over. The body is also made of solid aluminum bars, and I was impressed by the ruggedness.
Was the installation difficult?
However, if you have changed the front brakes master to a radio pon, you will need to use the longer mounting bracket (sold separately) or add a washer and collar to the bracket as shown in the photo. It is also necessary to add a washer and collar to the supplied bracket as shown in the photo so that the body does not interfere with the MASTER.
I also changed the routing of the body to prevent it from interfering with the wire and wiring when it falls, and tightened the bolt on the bracket to prevent it from rotating.
How was your experience with it?
I've used it for about 5 or 6 years, and I've fallen many times on both Asphalt and dirt, but the body never broke, and the front brakes master never broke, the clutch lever never broke, and the wire never tore. In addition, the body was not bent if the fall was only SlipDown.
I've never crashed on the high side before, including the time I was competing in the race, so I can't review whether I'm safe or not after being hit on the high side.
In addition, even if the surface was scraped off by a fall, it would not get stuck even if it fell over next time if the surface was made smooth with File or Glineda.
In order to prevent injuries, it is recommended that the surface of the board be sanded down after a fall.
[Included Parts:were they on?
Bracket, Anchor, Bolt, etc.
[Was there anything that disappointed you?
Anodized (Black) The color faded rather easily and became brownish. I was disappointed in that.
[ITEMS TO BUY TOGETHER
Hand Protector for ArmourGuard
You should buy one to protect your hands from stepping stones.
However, there is an aspect of aerodynamic drag in the Motard race.
If I fall and scrape it off, I'd better buy this one again, but it doesn't break easily, so I can just use it. LOL!
Color, Washer, Long Bolt
If you are installing a Radipon, you need to buy the long Bracket (sold separately) if you don't want to skimp on it, otherwise it will be impossible to install.View Detail
I was wearing the AdventureHand guard, but I couldn't get the mounting position right, and the guard position was pretty much down ….
I replaced it with an Armor Handguard.
I have bought the Knuckle guard, but I am troubled because I need to remove the ZETASeal to install it.
It's a good looking product and my favorite.View Detail
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING