50.06 USD
(7,576 JPY)
4 (2 Reviews)
Average
I used it with W800.We installed this to improve the visibility of the W800 from oncoming traffic.
The same product is also sold by KIJIMA, but this time I used this one by PROTEC.
There was nothing difficult about the installation, and I was able to proceed with the work quickly and easily.
It was good point
Blinker positioning, which was the original purpose, was easily achieved.
There is no need to add resistors, etc., and it is compatible with LED bulbs as it is.
What's not so great about it
Quantity in Position state than I expected.:Pair (for Left and Right) The brightness of the Blinker Bulb is dark.
Blinker blinking speed became very slow. ← I can't do anything about it because there is no blinking speed adjustment function.
It's a relatively expensive product, but there are a lot of complaints and I'm not sure how to explain them.
The UnitBody is also a Motorcycle without a Cowl. "Under Seat. I only have about a storage space.
When you think about it, it's the Large size that makes it difficult to store, and more! I want to say with a large voice.
This time, I bought it, but can I recommend it to others? I don't feel like that when I am asked.
I was a little disappointed with the Parts.
Adjustment of the brightness and the blinking speed is indispensable, and I hope that the Body can be made Small Type even a little more.
Reviews For PROTEC WPL-01 Blinker Position Lamp Kit From Other Webike User
Very Good
For Whiposi processing[How is it used?
Used for Blinker positioning of TW.
It's been a year and a half since I installed it and I'm using it with no problems.
Was the installation difficult?
Wiring process is necessary, so it may be difficult if you are not familiar with it.
A wiring diagram is a good way to make progress.
How was your experience with it?
The flashing speed is a little slow and there is a momentary lag after moving the Switch, but it does not interfere with use.
No problem with flashing light intensity.
The amount of light at the time of the important position is a little dark, but I do not care because I am a clear blinker.
It was a Hazard switch diversion for SEROW and it was well supported by Hazard.
[Was there anything that disappointed you?
I bought this because I knew it was going to be a large size, but the UnitBody is a large size.
I've been throwing it around without fixing it to the back of the Headlight cowl, but so far it's withstood the vibrations of the forest road.
Other items that would be helpful
[ITEMS TO BUY TOGETHER
Electric Works Pliers and spare terminals are essential.
Some Honda vehicles are a little too small for the Bullet Terminal, so you'll need to adjust one of them.
[Opinions and requests to Manufacturer
I would like to make the Unit a little smaller.
Also, the Wiring is a cheap or primary color that may be noticeable on some vehicles, so it would be nice if the color was OEM-ish.View Detail
Most Viewed Reviews Of PROTEC Turn Signals
Terrible
I don't think I explained myself well enough!I ran with a Can Seraer.
It cancels the Blinker, but
After all, you have to CancelPush the
That's the problem!
I'd like to see that in the purchase description.
I'd advise caution if you're considering buying one!
It's also quite difficult to install, so it's not for amateurs.View Detail
Very Good
For Whiposi processing[How is it used?
Used for Blinker positioning of TW.
It's been a year and a half since I installed it and I'm using it with no problems.
Was the installation difficult?
Wiring process is necessary, so it may be difficult if you are not familiar with it.
A wiring diagram is a good way to make progress.
How was your experience with it?
The flashing speed is a little slow and there is a momentary lag after moving the Switch, but it does not interfere with use.
No problem with flashing light intensity.
The amount of light at the time of the important position is a little dark, but I do not care because I am a clear blinker.
It was a Hazard switch diversion for SEROW and it was well supported by Hazard.
[Was there anything that disappointed you?
I bought this because I knew it was going to be a large size, but the UnitBody is a large size.
I've been throwing it around without fixing it to the back of the Headlight cowl, but so far it's withstood the vibrations of the forest road.
Other items that would be helpful
[ITEMS TO BUY TOGETHER
Electric Works Pliers and spare terminals are essential.
Some Honda vehicles are a little too small for the Bullet Terminal, so you'll need to adjust one of them.
[Opinions and requests to Manufacturer
I would like to make the Unit a little smaller.
Also, the Wiring is a cheap or primary color that may be noticeable on some vehicles, so it would be nice if the color was OEM-ish.View Detail
Other Reviews From Japanese Webike user
Excellent
Radipon handled in Mild?attachment
The CBR650R is mounted at the same position angle as the NORMAL.
However, when the handlebar was cut to the Left lock, it interfered with the interior cover next to the Meter, so the interior cover was cut away.
I also purchased a 45° angled banjo adapter for the mesh hose to accommodate the tension of the mesh hose.
・NORMAL (Reserve integrated horizontal master) Impressions of
No complaints on public roads. Familiar feel and very easy to handle.
However, when the brake is set to "hard brake," the rate of increase in braking force relative to the input seems to decrease, and the brake becomes more forceful.
Radipon (Reserve separate body portrait master) Impressions of
It was totally different from what I expected, my expectation was that it would feel like a Rear brake…
It is really a mild and easy-to-handle radipon.
On public roads, it feels like NORMAL! I wonder if it's because NORMAL is the same NISSIN?
But I felt the radipon effect from Breaking a little stronger, and
It can be hung up to a hard brake without effort.
I felt trust that this could stop.View Detail
Very Good
packtalk bold Attached MountI purchased this for use with multiple Helmets. 。
Mount included with the BOLD.
Microphone and speaker are not included and must be purchased separately.View Detail
Excellent
Grip replacementGrip that had been used for a long time was worn out and had to be replaced.
They are soft and dampen vibration.View Detail
Very Good
Works well in everyday life[How is it used?
Used to lick Screw loose.
Was the one you received as per Image?
As per Image.
How was your experience with it?
When used on a strongly tightened Screw, it can be safely and securely removed.
The licked Screw was removed.
It is also useful for DIY Screw removal.
[Points to note]
When used on a licked Screw, it is best to beat it in with a Hammer before use.View Detail
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING