52.46 USD
(7,935 JPY)
4 (1 Reviews)
rating breakdown
5 Stars |
|
0 |
4 Stars |
|
1 |
3 Stars |
|
0 |
2 Stars |
|
0 |
1 Stars |
|
0 |
Very Good
For countermeasures against pumping lossThe machining accuracy and manufacturing is excellent. I was relieved that it seems to be strong too.
The Breather pipe is a standard 15mm inner diameter one, but the insertion was quite tight.
I warmed it up in the Dryer and managed to get it in.
Because I wanted to turn it from the front and crawl it to the left side of the vehicle body, I decided to use the flexible Tetoron Hose from the bending angle, but I managed to get it in and it was a relief.
The trouble with the installation was that the head cover stuck to the liquid gasket and did not budge.
A part of the head cover was protruding only at the front part of the Bolt, and it finally came off by driving a slotted screwdriver into the border of it.
It is possible to replace the head cover without lowering the engine by floating the head cover to the full extent.
Apply a thin layer of oil-resistant liquid Gasket again and put it back on.
The Oil catch tank was prepared by processing the one on hand because Blowby was to be added.
The Hurdle of this process may be too high to use this Parts.
If you want to install it by yourself, I think you need to have some knowledge and skill only for Race Parts.
I've always heard that the Blowby extension works well, and I was able to experience the effects.
It feels like the engine is breathing without any loss, and it genuinely improves the feeling of power and blowing up.
Personally, I am satisfied with the increased Custom feeling.
Other Reviews From Japanese Webike user
Excellent
Radipon handled in Mild?attachment
The CBR650R is mounted at the same position angle as the NORMAL.
However, when the handlebar was cut to the Left lock, it interfered with the interior cover next to the Meter, so the interior cover was cut away.
I also purchased a 45° angled banjo adapter for the mesh hose to accommodate the tension of the mesh hose.
・NORMAL (Reserve integrated horizontal master) Impressions of
No complaints on public roads. Familiar feel and very easy to handle.
However, when the brake is set to "hard brake," the rate of increase in braking force relative to the input seems to decrease, and the brake becomes more forceful.
Radipon (Reserve separate body portrait master) Impressions of
It was totally different from what I expected, my expectation was that it would feel like a Rear brake…
It is really a mild and easy-to-handle radipon.
On public roads, it feels like NORMAL! I wonder if it's because NORMAL is the same NISSIN?
But I felt the radipon effect from Breaking a little stronger, and
It can be hung up to a hard brake without effort.
I felt trust that this could stop.View Detail
Very Good
packtalk bold Attached MountI purchased this for use with multiple Helmets. 。
Mount included with the BOLD.
Microphone and speaker are not included and must be purchased separately.View Detail
Excellent
Grip replacementGrip that had been used for a long time was worn out and had to be replaced.
They are soft and dampen vibration.View Detail
Very Good
Works well in everyday life[How is it used?
Used to lick Screw loose.
Was the one you received as per Image?
As per Image.
How was your experience with it?
When used on a strongly tightened Screw, it can be safely and securely removed.
The licked Screw was removed.
It is also useful for DIY Screw removal.
[Points to note]
When used on a licked Screw, it is best to beat it in with a Hammer before use.View Detail
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING