I don't remember which manufacturer, but I had a set switch with a clutch lever, but I wanted a blinker push cancel, so I replaced it. This product also has a position switch, and I drilled a hole in the light and installed a position bulb. Since I installed it on a 6V based gorilla, there is no 6P coupler, so I used the sub-harness C in the kit and put the yellow wire into the coupler to make the body side. Is the headlight wiring backwards as well? I reconnected the wires and the HI and LO lights came on correctly, but when I pass the lights with the HI beam, the lights go out … I thought it was a wiring error, but I decided to complete it.
Fits: HONDA MONKEY 97 Z50J [Frame No.]Z50J-2400001 to 2499999, HONDA MONKEY 96 Z50J [Frame No.] Z50J-2300001 to 2306110, HONDA MONKEY 95 Z50J [Frame No.] Z50J-2200001 to 2299999, HONDA MONKEY 93 Z50J [Frame No.] Z50J-2100001 to 2114151, HONDA GORILLA 99 Z50J [Frame No.]Z50J-2600001 to 2699999
Product is great and easy to install. Shipping is very fast it only took days to arrive here in Philippines. Product packaging is very good it is secured with bubble wrap. View Detail
Fits: HONDA MONKEY 97 Z50J [Frame No.]Z50J-2400001 to 2499999, HONDA MONKEY 96 Z50J [Frame No.] Z50J-2300001 to 2306110, HONDA MONKEY 95 Z50J [Frame No.] Z50J-2200001 to 2299999, HONDA MONKEY 93 Z50J [Frame No.] Z50J-2100001 to 2114151, HONDA GORILLA 99 Z50J [Frame No.]Z50J-2600001 to 2699999
authentic and fast delivery. dont hesitate to buy in this shop i will be ordering other parts soon. thankyou and more powerView Detail
Fits: HONDA MONKEY 97 Z50J [Frame No.]Z50J-2400001 to 2499999, HONDA MONKEY 96 Z50J [Frame No.] Z50J-2300001 to 2306110, HONDA MONKEY 95 Z50J [Frame No.] Z50J-2200001 to 2299999, HONDA MONKEY 93 Z50J [Frame No.] Z50J-2100001 to 2114151, HONDA GORILLA 99 Z50J [Frame No.]Z50J-2600001 to 2699999
[How is it used?
We purchased this lamp to be installed with the light switch because we installed a position lamp when we started to customize the electrical system.
Was the one you received as per Image?
Material is also Material:Plastic but solid and exactly as shown in the Image.
Was the installation difficult?
In the electrical system, Wiring is Large variable.
I managed to install it by processing it while repeatedly staring at the wiring diagram in the service manual.
How was your experience with it?
It was very easy to use and the hard work paid off.
[Included Parts:were they on?
Only Harness.
[Was there anything that disappointed you?
The size is a little large, so it is better to check the length of the handlebar first to see if it can be attached to the handlebar.
If only one of the switch boxes is replaced, the balance will be lost, so you will want to use a switch box with a similar design on the other side.View Detail
Fits: HONDA MONKEY 97 Z50J [Frame No.]Z50J-2400001 to 2499999, HONDA MONKEY 96 Z50J [Frame No.] Z50J-2300001 to 2306110, HONDA MONKEY 95 Z50J [Frame No.] Z50J-2200001 to 2299999, HONDA MONKEY 93 Z50J [Frame No.] Z50J-2100001 to 2114151, HONDA GORILLA 99 Z50J [Frame No.]Z50J-2600001 to 2699999
Headlight Dimmer Switch, HI and LO Switching Switch is broken
This is the second one I've had already, the first one broke inside my Switch and the second one started the other day.
I can't switch between the two anymore, I hope this Dimmer Switch does something about it because the others are good.View Detail
Fits: HONDA MONKEY 97 Z50J [Frame No.]Z50J-2400001 to 2499999, HONDA MONKEY 96 Z50J [Frame No.] Z50J-2300001 to 2306110, HONDA MONKEY 95 Z50J [Frame No.] Z50J-2200001 to 2299999, HONDA MONKEY 93 Z50J [Frame No.] Z50J-2100001 to 2114151, HONDA GORILLA 99 Z50J [Frame No.]Z50J-2600001 to 2699999
My GORILLA is a 6v body of the Showa era, so BlinkerSW was Right Side! There is a desire to keep it as OEM, but the SW is the Right Side Thanks It's still hard to combine Axel and SW operations together! Because I am lazy Therefore, I decided to purchase the collective SW with push cancellation Handlebar, Clutch lever, Brake lever, etc. by this SW installation The installation of the SW itself on the Handlebar is easy It is possible, but 6v GORILLA is for 6v GORILLA is quite different from Wiring for 12v, so it is one of the best testers I managed to finish the work by checking each one and joining them together None of the sub's wires, except for the attached MainWiring, could be used
As for the head lamp, the high beam that was not attached in NORMAL was made to be able to operate The LED Daylight is turned on at the position of the
Push cancellationSW is good, and it became very easy to ride The course change can be done without anxiety I am glad to have purchased this productView Detail
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING