5.32~ USD
(805 JPY)
5 (4 Reviews)
Excellent
As a countermeasure against potential differences in the genus Gold?Material License Plate Bolt:Since I replaced it with Titanium, Nut is also Material as a measure against potential difference.:I made it to Titanium.
I'm not a science guy, so I don't know much about potential difference... .w
Reviews For ZETA Titanium Flange Lock Nut From Other Webike User
Excellent
Affordable Material:TitaniumFlange Lock NutWe installed this ZETA TitaniumFlange Lock NutZT21-1061 (M6 P=1.0) on the M6 Cap Bolt that pushes the Master Cylinder.
The locking mechanism seems to have a narrower Screw Pitch at the top, which makes it impossible to tighten by hand at all.
I was worried that if it was too tight, it might damage the mountain on the Bolt side, but when I actually tightened it, it seemed to be Large sturdy without that much concern.
However, no type of lock nut can be guaranteed not to loosen, so I will be sure to check regularly to see if it has loosened.
I am very satisfied with the improved functionality and of course the quality of the look and feel of the product.View Detail
Excellent
Luxury that can be done because Custom.Along with Bore up, Nut which holds Stud bolt tends to loosen, and as a countermeasure, I used Nut with nails, but because it is a part that gets high heat, I can not use Stainless Steel and use iron was doing. Iron is not all-purpose, Rust comes out. I was looking for something good Parts to find out this item. Those who are using Zeta's Lever think that they understand, but the products of ZETA are very accurate and have good appearance. The same was true for this Titanium nut. It is equipped with a lock mechanism to create thin and lightweight.
General User has Material : Titanium products are just a self-sufficient, Titanium raises Custom feeling to 1 Rank and 2 Rank. Titanium nut for Titanium Exhaust. How is it, is not it? Haha
It is a Parts you want to use by all means.View Detail
Excellent
Used for XJR 1300 Disc Rotor BoltI used it for ENKEIWheel for installing Disc Lock.
Unlike OEM, install with Bolt and Lock nut.
There is a lock mechanism at the top of Nut.
Building is a good feeling, I fastened Torque wrench
1Quantity : 2pc. Set All, there was no funny stuck and it was the same tightening adjustment.
Stone Titanium Titanium (^^) It's light. (Lol)View Detail
Most Viewed Reviews Of ZETA General-Purpose Nut
Excellent
Affordable Material:TitaniumFlange Lock NutWe installed this ZETA TitaniumFlange Lock NutZT21-1061 (M6 P=1.0) on the M6 Cap Bolt that pushes the Master Cylinder.
The locking mechanism seems to have a narrower Screw Pitch at the top, which makes it impossible to tighten by hand at all.
I was worried that if it was too tight, it might damage the mountain on the Bolt side, but when I actually tightened it, it seemed to be Large sturdy without that much concern.
However, no type of lock nut can be guaranteed not to loosen, so I will be sure to check regularly to see if it has loosened.
I am very satisfied with the improved functionality and of course the quality of the look and feel of the product.View Detail
Excellent
Use with Lever pivotWhen I replaced the OEM lever pivot pin, I also replaced the nut. It is the world of self-satisfaction at all. (´p.s.)
Maybe no one will notice … but that's okay.View Detail
Excellent
Luxury that can be done because Custom.Along with Bore up, Nut which holds Stud bolt tends to loosen, and as a countermeasure, I used Nut with nails, but because it is a part that gets high heat, I can not use Stainless Steel and use iron was doing. Iron is not all-purpose, Rust comes out. I was looking for something good Parts to find out this item. Those who are using Zeta's Lever think that they understand, but the products of ZETA are very accurate and have good appearance. The same was true for this Titanium nut. It is equipped with a lock mechanism to create thin and lightweight.
General User has Material : Titanium products are just a self-sufficient, Titanium raises Custom feeling to 1 Rank and 2 Rank. Titanium nut for Titanium Exhaust. How is it, is not it? Haha
It is a Parts you want to use by all means.View Detail
Excellent
Used for XJR 1300 Disc Rotor BoltI used it for ENKEIWheel for installing Disc Lock.
Unlike OEM, install with Bolt and Lock nut.
There is a lock mechanism at the top of Nut.
Building is a good feeling, I fastened Torque wrench
1Quantity : 2pc. Set All, there was no funny stuck and it was the same tightening adjustment.
Stone Titanium Titanium (^^) It's light. (Lol)View Detail
Other Reviews From Japanese Webike user
Excellent
Radipon handled in Mild?attachment
The CBR650R is mounted at the same position angle as the NORMAL.
However, when the handlebar was cut to the Left lock, it interfered with the interior cover next to the Meter, so the interior cover was cut away.
I also purchased a 45° angled banjo adapter for the mesh hose to accommodate the tension of the mesh hose.
・NORMAL (Reserve integrated horizontal master) Impressions of
No complaints on public roads. Familiar feel and very easy to handle.
However, when the brake is set to "hard brake," the rate of increase in braking force relative to the input seems to decrease, and the brake becomes more forceful.
Radipon (Reserve separate body portrait master) Impressions of
It was totally different from what I expected, my expectation was that it would feel like a Rear brake…
It is really a mild and easy-to-handle radipon.
On public roads, it feels like NORMAL! I wonder if it's because NORMAL is the same NISSIN?
But I felt the radipon effect from Breaking a little stronger, and
It can be hung up to a hard brake without effort.
I felt trust that this could stop.View Detail
Very Good
packtalk bold Attached MountI purchased this for use with multiple Helmets. 。
Mount included with the BOLD.
Microphone and speaker are not included and must be purchased separately.View Detail
Excellent
Grip replacementGrip that had been used for a long time was worn out and had to be replaced.
They are soft and dampen vibration.View Detail
Very Good
Works well in everyday life[How is it used?
Used to lick Screw loose.
Was the one you received as per Image?
As per Image.
How was your experience with it?
When used on a strongly tightened Screw, it can be safely and securely removed.
The licked Screw was removed.
It is also useful for DIY Screw removal.
[Points to note]
When used on a licked Screw, it is best to beat it in with a Hammer before use.View Detail
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING