72.19 USD
(10,925 JPY)
5 (2 Reviews)
Excellent
Necessities of NS50If you are going to run Circuit with NS50F.R, you should definitely add it. the stability of Breaking and High Speed Corner is different.
Although it is not written in the Instruction Manual, it is possible to adjust the rigidity by the installation method, and it is possible to set it in the high-speed and low-speed course.
Fender cut or removal is required for installation.
Reviews For TTS V Stabilizer From Other Webike User
Very Good
Since NS50F has the thin path of a cfc and Faulk, if it equips with a high grip tire, it will be distorted at the time of a cornering, and will lack sense of stability.
Then, distortion of a cfc and Faulk can be suppressed by equipping with this stabilSince NS50F has the thin path of a cfc and Faulk, if it equips with a high grip tire, it will be distorted at the time of a cornering, and will lack sense of stability.
Then, distortion of a cfc and Faulk can be suppressed by equipping with this stabilizer.
If actually attached, an effect will seldom be acquired in an inside low speed area, but by the cornering of a high speed area, it becomes an entire different-thing machine.
They are necessaries for attacking a circuit by NS50.
Moreover, in equipping with these parts, processing of a front fender or removal is needed.View Detail
Most Viewed Reviews Of TTS Fork Stabilizer
Very Good
Since NS50F has the thin path of a cfc and Faulk, if it equips with a high grip tire, it will be distorted at the time of a cornering, and will lack sense of stability.
Then, distortion of a cfc and Faulk can be suppressed by equipping with this stabilSince NS50F has the thin path of a cfc and Faulk, if it equips with a high grip tire, it will be distorted at the time of a cornering, and will lack sense of stability.
Then, distortion of a cfc and Faulk can be suppressed by equipping with this stabilizer.
If actually attached, an effect will seldom be acquired in an inside low speed area, but by the cornering of a high speed area, it becomes an entire different-thing machine.
They are necessaries for attacking a circuit by NS50.
Moreover, in equipping with these parts, processing of a front fender or removal is needed.View Detail
Other Reviews From Japanese Webike user
Excellent
Radipon handled in Mild?attachment
The CBR650R is mounted at the same position angle as the NORMAL.
However, when the handlebar was cut to the Left lock, it interfered with the interior cover next to the Meter, so the interior cover was cut away.
I also purchased a 45° angled banjo adapter for the mesh hose to accommodate the tension of the mesh hose.
・NORMAL (Reserve integrated horizontal master) Impressions of
No complaints on public roads. Familiar feel and very easy to handle.
However, when the brake is set to "hard brake," the rate of increase in braking force relative to the input seems to decrease, and the brake becomes more forceful.
Radipon (Reserve separate body portrait master) Impressions of
It was totally different from what I expected, my expectation was that it would feel like a Rear brake…
It is really a mild and easy-to-handle radipon.
On public roads, it feels like NORMAL! I wonder if it's because NORMAL is the same NISSIN?
But I felt the radipon effect from Breaking a little stronger, and
It can be hung up to a hard brake without effort.
I felt trust that this could stop.View Detail
Very Good
packtalk bold Attached MountI purchased this for use with multiple Helmets. 。
Mount included with the BOLD.
Microphone and speaker are not included and must be purchased separately.View Detail
Excellent
Grip replacementGrip that had been used for a long time was worn out and had to be replaced.
They are soft and dampen vibration.View Detail
Very Good
Works well in everyday life[How is it used?
Used to lick Screw loose.
Was the one you received as per Image?
As per Image.
How was your experience with it?
When used on a strongly tightened Screw, it can be safely and securely removed.
The licked Screw was removed.
It is also useful for DIY Screw removal.
[Points to note]
When used on a licked Screw, it is best to beat it in with a Hammer before use.View Detail
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING