Since it is troublesome to change back to OEM at the time of vehicle inspection, it is recommended to use the Japanese Vehicle Inspection Correspondence here.
We made it a product.
At first, it was still too big to look at and I resisted.
But I got used to it right away, and it's easy to see, and I thought this was good.
Well, it is a replacement for the time of the vehicle inspection.
Fits: Others Universal, YAMAHA MT-09 21 BAM8/8BL-RN69J Requires separate HIGHSIDER(R) Bar End Mirror Adapter (96703)., YAMAHA MT-07 21 M419E/8BL-RM33J Can only be mounted facing upwards as it hits the tank. HIGHSIDER(R) Bar End Mirror Adapter (96702) is required., HONDA Rebel1100 DCT 21 Must be installed together with 8BL-SC83 17789. Recommended for upward installation., HONDA Rebel1100 21 Must be installed together with 8BL-SC83 17789. Recommended for upward installation.
The Bar end mirror was installed on the stofer for visual appeal.
If the appearance is important, it is better to install it downward, but in the case of Z900, there is interference with the Tank Fairing, so it is installed Up.
The mirror surface is closer to the Handlebar End side than OEMMirror, making it easier to see than OEMMirror.
Above all, the height around the Handlebar is reduced, making it look Refreshing.View Detail
Fits: Others Universal, YAMAHA MT-09 21 BAM8/8BL-RN69J Requires separate HIGHSIDER(R) Bar End Mirror Adapter (96703)., YAMAHA MT-07 21 M419E/8BL-RM33J Can only be mounted facing upwards as it hits the tank. HIGHSIDER(R) Bar End Mirror Adapter (96702) is required., HONDA Rebel1100 DCT 21 Must be installed together with 8BL-SC83 17789. Recommended for upward installation., HONDA Rebel1100 21 Must be installed together with 8BL-SC83 17789. Recommended for upward installation.
Well, my first impression is that it could have been OEM.
This is because the rear visibility is much better with OEM.
If you like the STREETFIGHTER-like Style, you'll be hooked.
I felt that Custom was very appearance-oriented.
I am aware that motorcycles are just a form of self-satisfaction, including their appearance.
I've been using this style since I bought it and I'm going to enjoy it.
Parenthesis is a good idea to keep the whole thing low.
It is made by DAYTONA, so there is no problem with the manufacturing.
It will be harder to slip through.
However, the effect of the largest size of this mirror is so good that you don't need to slip through it.
I enjoy parenthesis and motorcycling. So I don't do impatient things like slipping and sliding. I think I can become a large person rider who thinks "I can do this".View Detail
Fits: Others Universal, YAMAHA MT-09 21 BAM8/8BL-RN69J Requires separate HIGHSIDER(R) Bar End Mirror Adapter (96703)., YAMAHA MT-07 21 M419E/8BL-RM33J Can only be mounted facing upwards as it hits the tank. HIGHSIDER(R) Bar End Mirror Adapter (96702) is required., HONDA Rebel1100 DCT 21 Must be installed together with 8BL-SC83 17789. Recommended for upward installation., HONDA Rebel1100 21 Must be installed together with 8BL-SC83 17789. Recommended for upward installation.
Recommendation for those who are thinking of installing a Bar end mirror
It's mediocre in Montana, where it's used in Mission Impossible, and it's not so bad in Vic Birdie For those who think it's too much
It's extremely visible and reassuring, and it's a breeze to maneuver around in GarageView Detail
Fits: Others Universal, YAMAHA MT-09 21 BAM8/8BL-RN69J Requires separate HIGHSIDER(R) Bar End Mirror Adapter (96703)., YAMAHA MT-07 21 M419E/8BL-RM33J Can only be mounted facing upwards as it hits the tank. HIGHSIDER(R) Bar End Mirror Adapter (96702) is required., HONDA Rebel1100 DCT 21 Must be installed together with 8BL-SC83 17789. Recommended for upward installation., HONDA Rebel1100 21 Must be installed together with 8BL-SC83 17789. Recommended for upward installation.
Visibility is solid, no distortions, no complaints! It is very easy to install and very rigid Depending on the car model, gsx250r vibrates at over 7000 RPM, but visibility is not a problem I don't think it was However, it's a little bit over $5,000 for One Side, so it's a little bit expensive, but it's well worth the purchase! !View Detail
Fits: Others Universal, YAMAHA MT-09 21 BAM8/8BL-RN69J Requires separate HIGHSIDER(R) Bar End Mirror Adapter (96703)., YAMAHA MT-07 21 M419E/8BL-RM33J Can only be mounted facing upwards as it hits the tank. HIGHSIDER(R) Bar End Mirror Adapter (96702) is required., HONDA Rebel1100 DCT 21 Must be installed together with 8BL-SC83 17789. Recommended for upward installation., HONDA Rebel1100 21 Must be installed together with 8BL-SC83 17789. Recommended for upward installation.
The Bar end mirror was the first one I used to try out for a cheap one on Net
In the OEM position, the NSR50 had a lot of vibration-induced blurring, but when I made it a Bar End, I was able to get it to work It's easier to get rearward visibility with little to no blurring But cheap is cheap, especially with the Quantity:The end cap that was attached by the set was not fixed well, and it came loose after a while, but I switched to DAYTONA and it's secure and secure
The Bar end cap is sold separately and the MirrorBody is also 1 pc each, which is expensive DifficultyView Detail
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING