31.92 USD
(4,830 JPY)
4.3 (38 Reviews)
Excellent
Slider also in OffOn the occasion of the forest road touring, I installed Slider though it is a part for Road.
There is a possibility of getting caught and eating a high SIDE, but I want to avoid the risk of sliding and falling to the bottom of the valley, so I put it on.
I haven't fallen yet, so I don't know how effective they are, but I think they will reduce the damage from standing, and at least I avoided the mud clogging in the Axle Shaft.
It looks chic and I'm happy with it.
As the car is getting older, more and more parts are missing, so I want to protect the parts and make them last longer.
The Swing Arm is not the original Swing Arm, so I choose the Slider of the CRM250.
The Nut that came with it was Penetrating, so I used a Cap Nut that I had on hand and made one of them a Double Nut to stop it from loosening. The mud clogging should be able to be avoided by this.
Try it.
Reviews For antlion Rear Slider From Other Webike User
Excellent
Antlion rear sliderWell front slider looks cool, but inner threaded rod only M6 in diameter. If rod were M8 it will be solid. Got front, rear & engine mount, looks cool in a set.View Detail
Excellent
I'm playing a role.It supported me when I was standing on a slope.
I think the SliderBody shaves off about 2 minutes.
The Material may be softer than you think, so if you've got the speed, it's going to be aggressively cut down.View Detail
Very Good
Easy to install Dress-up!Dress-up I installed it thinking that I should reduce even a little even the Damage at the time of rolling down.
Installation was very easy, but Wrench is Quantity : Pair (for Left and Right) It was necessary to hold down with 2.
Other than that it was very good as it was very smooth.
It is cheaper than those made by other companies but I like it very much.View Detail
Average
Enrich the manual!I would like to enhance the handling Instruction Manual.
Slider's L / I wanted R to be clearly written in Body and manual.
Although I understood to Sugu privately - - -.
I wanted you to use Screw's Stopper or Screw for loosening.View Detail
Most Viewed Reviews Of antlion Axle Slider
Excellent
Antlion front sliderInner rod dia M6 was to small, M8 or M10 will defintely solid. As i already have front, rear and engine mount kit. "So cool in a set"View Detail
Excellent
Antlion rear sliderWell front slider looks cool, but inner threaded rod only M6 in diameter. If rod were M8 it will be solid. Got front, rear & engine mount, looks cool in a set.View Detail
Excellent
Nice product and customer service!The antlion Rear Slider looks good - and is easy to install too with few tools required. This is not a required product to install on your supermoto setup but if you want an extra peace of mind get one. This will save your forks from getting scratched and quite possibly, avoid damaging the axle on harder crashes. I just wish it is available in multiple colors.+Looks good+Price+Easy to installNote: I received the wrong product but WeBike decided to replace the wrong one free of charge. Thank you WeBike for the excellent service! View Detail
Excellent
Bling and protection at the same timeThe antlion Front Slider looks good - and is easy to install too with few tools required. This is not a required product to install on your motard setup but if you want an extra peace of mind get one. This will save your forks from getting scratched and quite possibly, avoid damaging the axle on harder crashes. I just wish it is available in multiple colors.+Looks good+Price+Easy to install View Detail
Other Reviews From Japanese Webike user
Excellent
Radipon handled in Mild?attachment
The CBR650R is mounted at the same position angle as the NORMAL.
However, when the handlebar was cut to the Left lock, it interfered with the interior cover next to the Meter, so the interior cover was cut away.
I also purchased a 45° angled banjo adapter for the mesh hose to accommodate the tension of the mesh hose.
・NORMAL (Reserve integrated horizontal master) Impressions of
No complaints on public roads. Familiar feel and very easy to handle.
However, when the brake is set to "hard brake," the rate of increase in braking force relative to the input seems to decrease, and the brake becomes more forceful.
Radipon (Reserve separate body portrait master) Impressions of
It was totally different from what I expected, my expectation was that it would feel like a Rear brake…
It is really a mild and easy-to-handle radipon.
On public roads, it feels like NORMAL! I wonder if it's because NORMAL is the same NISSIN?
But I felt the radipon effect from Breaking a little stronger, and
It can be hung up to a hard brake without effort.
I felt trust that this could stop.View Detail
Very Good
packtalk bold Attached MountI purchased this for use with multiple Helmets. 。
Mount included with the BOLD.
Microphone and speaker are not included and must be purchased separately.View Detail
Excellent
Grip replacementGrip that had been used for a long time was worn out and had to be replaced.
They are soft and dampen vibration.View Detail
Very Good
Works well in everyday life[How is it used?
Used to lick Screw loose.
Was the one you received as per Image?
As per Image.
How was your experience with it?
When used on a strongly tightened Screw, it can be safely and securely removed.
The licked Screw was removed.
It is also useful for DIY Screw removal.
[Points to note]
When used on a licked Screw, it is best to beat it in with a Hammer before use.View Detail
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING