Because the phenomenon that the License Plate Light flickers in synchronization with the blink of the Blinker occurred, LED was carried out.
The flickering of the License Plate Light has been eliminated by changing to LED.
I also replaced the Relay with the enclosed Relay, but after using it for about 3 months, the Position lamp and Quantity:Pair (for Left and Right) Blinker and Hazard lamp don't light up at all anymore. Is this a durability issue? It's a shame because they blink beautifully.
Fits: HONDA CBR1000RR 04-05, HONDA CB1300 SUPER BOL D'OR 05, HONDA CB1300 Super Four 03-05, HONDA CBR600F F4i, HONDA CBR600RR 03-05
[How is it used?
RushUp in a modern style!
Was the one you received as per Image?
Yes
Was the installation difficult?
it's simple
How was your experience with it?
No problems
[Included Parts:were they on?
[Was there anything that disappointed you?
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the ManufacturerView Detail
Fits: HONDA CBR1000RR 04-05, HONDA CB1300 SUPER BOL D'OR 05, HONDA CB1300 Super Four 03-05, HONDA CBR600F F4i, HONDA CBR600RR 03-05
Installation model : CB 1300 SF "SC 54" 2004
Reason for purchase.
Battery, for reducing the burden of Dynamo.
After the Kit conversion, Blinker (Hazard) On light
It was almost impossible to confirm the drop in the light intensity of Headlight accompanying it.
There was no statement in any Impression,
In OEM state, Font Blinker doubles as car width light
This function that was uneasy until this Kit was handy also
It is well reproduced and the same etc. Work on.
By evaluation of this Kit, evaluation is said to be dark - bright
From the conclusion, "Bright" is appropriate
It will be an evaluation.
I think that it is easy to understand when referring to the published photos.
From the Front side Light - Quantity : Pair (for Left and Right) A copy of Blinker.
Headlight is Halogen bulb, vehicle Right Side is car width light,
Left Side when Blinker is lit.
Never, I'm not worried about the brightness
Again, due to the characteristics of the LED, straight light going out strongly
There are a lot of diffused light, Reflector behind the light source is also
I feel it is darker than a light bulb that supports luminescence environment.
Orange emission color may also be one factor that can not raise illuminance.
Therefore, some processing was added before installation.
If the paint color of the Led Base is White, Silver, Mirror Finishing
Although it is good, this product is Mud black,
This will absorb more dispersed light.
CuttingTape is added to its black part
(Outdoor long-term countermeasure type "3 M") Improved Lef effect by using.
Since the legs of the LED are exposed, using the member with the Gold attribute
Short (Short circuit) Be careful as you do.
Additional notes
The resin Washer bundled with Kit is installed at the time of installation
Because it is intended to prevent parts from falling out, at the base of Screw
Again add resin Washer and install effect
I aimed for improvement.View Detail
Fits: HONDA CBR1000RR 04-05, HONDA CB1300 SUPER BOL D'OR 05, HONDA CB1300 Super Four 03-05, HONDA CBR600F F4i, HONDA CBR600RR 03-05
We also examined things of explosion of personal purchase with NetOakion, but also purchased Manufacturer items as well.
Brightness is "It is darker than a light bulb" There is a person who says, but it is questionable whether it will light up on Engine, even if it is totally bright..
Since Headlight is a normal point, is it good?
The problem is Included Parts : Kikuza.
Although it is supposed to be a thing for Spacer not falling out from Screw,
It is easy to get out because there is no Size.
An easy-to-understand Instruction Manual is attached "There is only a momentary value" I caught on and thoughtfully,
I was irritated.
Packing of my own vehicle was reusable.View Detail
Fits: HONDA CBR1000RR 04-05, HONDA CB1300 SUPER BOL D'OR 05, HONDA CB1300 Super Four 03-05, HONDA CBR600F F4i, HONDA CBR600RR 03-05
It attached to CB1300SB of 05.The first blink was somewhat long and remembered the Motorcycle a decade ago.Since dimensioning of the LED substrate was solid, it finished with 30 minutes with sufficient Hamari.When a substrate is fixed to a Blinker Case, it fixes by a Long screw through a resin color.The chrysanthemum Washer was attached so that a Screw might not fall, but it was loose and meaningless.The Manufacturer should improve a Size.View Detail
Fits: HONDA CBR1000RR 04-05, HONDA CB1300 SUPER BOL D'OR 05, HONDA CB1300 Super Four 03-05, HONDA CBR600F F4i, HONDA CBR600RR 03-05
electric lamp Blinker -- a Position -- with Zillah (light blink) -- since it was disagreeable
It attached to CBR600RR (06).Although conformity is why or 03~05, it is perfectly attached also to 06 MODELs.the time of attaching the Blinker in case of
electric lamp Blinker -- a Position -- with Zillah (light blink) -- since it was disagreeable, LED was used.It was canceled with
Zillah.Since
brightness can be checked clearly daytime also, I think that it is satisfactory.In
CBR600RR, a Blinker relay is between Headlight right and left, and it is somewhat troublesome. [ of exchange ]10,000 Overs of after
are slightly high ...
View Detail
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING