53.22~ USD
(8,050 JPY)
5 (1 Reviews)
Fits:
YAMAHA WR250F 03-20, YAMAHA WR450F 03-20, YAMAHA YZ125 05-21, YAMAHA YZ250 05-21, YAMAHA YZ250F 03-21
View more
rating breakdown
5 Stars |
|
1 |
4 Stars |
|
0 |
3 Stars |
|
0 |
2 Stars |
|
0 |
1 Stars |
|
0 |
Excellent
Avoid Troubles That Make You Unable to DriveThe Chain Slider seems to be common to almost all of Yamaha's recent OffRoad racer models, so it can be diverted.
I have been using them for almost 10 years on my YZF, YZX and WRF.
OEM Material:AluminumBlock bends when it hits a rock or a tree, and in the worst case it becomes impossible to drive.
I bought this because my Chain Slider was bent and the Chain that came off almost split the Crankcase.
The quality is very high.
What I want to mention is that the bottom part is fastened with 4 hexagonal screws because of the 2 piece structure, but the distortion of the screw mountain does not appear at all even though it is a small screw and the point where the impact is frequently applied.
Material:A female screw like "Brass" is embedded in the body side of Plastic, but every time I do maintenance, the screw goes in smoothly and I am surprised.
Of course, the maintenance such as applying waterproof grease has been done.
As for the body, the wound became a lot as expected, but there is no particular deformation and it is possible to use it normally.
There is no rubber in the contact area with the Chain, and I thought that the durability might not be able to be expected because the resin of the Chain and the Body touch each other directly, but it seems that it can still be used with little wear unexpectedly.
I don't know much about material engineering, but the surface of the body is decorated with Carbon Style pattern, but the body material is probably DURAGON? I think the body is made of a material like DURAGON.
Personally, I like the Material made by ACERBIS:Plastic products seem to be good products.
The only thing that bothers me is that there is no rubber on the Guide, so when the Chain is strung loosely, it rattles a bit like a large fine-meshed rattle. I got used to it soon.
This is a recommendation for those who do not want to retire in a race, those who must return by themselves on a forest road, and those who want to protect their Crankcase from trouble.
It's also a good choice for those who plan on keeping their Yamaha vehicle for a long time because it can be used interchangeably.
Other Reviews From Japanese Webike user
Excellent
Radipon handled in Mild?attachment
The CBR650R is mounted at the same position angle as the NORMAL.
However, when the handlebar was cut to the Left lock, it interfered with the interior cover next to the Meter, so the interior cover was cut away.
I also purchased a 45° angled banjo adapter for the mesh hose to accommodate the tension of the mesh hose.
・NORMAL (Reserve integrated horizontal master) Impressions of
No complaints on public roads. Familiar feel and very easy to handle.
However, when the brake is set to "hard brake," the rate of increase in braking force relative to the input seems to decrease, and the brake becomes more forceful.
Radipon (Reserve separate body portrait master) Impressions of
It was totally different from what I expected, my expectation was that it would feel like a Rear brake…
It is really a mild and easy-to-handle radipon.
On public roads, it feels like NORMAL! I wonder if it's because NORMAL is the same NISSIN?
But I felt the radipon effect from Breaking a little stronger, and
It can be hung up to a hard brake without effort.
I felt trust that this could stop.View Detail
Very Good
packtalk bold Attached MountI purchased this for use with multiple Helmets. 。
Mount included with the BOLD.
Microphone and speaker are not included and must be purchased separately.View Detail
Excellent
Grip replacementGrip that had been used for a long time was worn out and had to be replaced.
They are soft and dampen vibration.View Detail
Very Good
Works well in everyday life[How is it used?
Used to lick Screw loose.
Was the one you received as per Image?
As per Image.
How was your experience with it?
When used on a strongly tightened Screw, it can be safely and securely removed.
The licked Screw was removed.
It is also useful for DIY Screw removal.
[Points to note]
When used on a licked Screw, it is best to beat it in with a Hammer before use.View Detail
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING