8.23 USD
(1,300 JPY)
7.8 USD
(1,232 JPY)
(5% OFF)
5 (4 Reviews)
Excellent
A must-have for Full Exhaust SystemThis tool is an absolute necessity for removing and installing the spring of the pipe of the Full Exhaust System. The grip is easy to grip and you can put a lot of pressure on it and you can pull the strong spring easily.
Reviews For KIJIMA Spring Removing Tool From Other Webike User
Excellent
strongI used it to remove and install the spring from the pipe of the Full Exhaust System.
It was easy to work with because it was sturdy and easy to hold.
The easy-to-grip grips make it easy to apply force and pull even strong springs.View Detail
Most Viewed Reviews Of KIJIMA Other Tools
Excellent
非常不错我的车子是KAWASAKI的NINJA 400，2019年款的。买这个是为了换刹车油，换完刹车油后难免会进去空气，之前都是手动排气，用了这个之后感觉非常方便，用注射器一抽空气就都出来了。比手动快了很多。为了增强耐用性，就换了个玻璃的瓶子。----------------------------------------------My car is 400, the 2019 models of KAWASAKI NINJA. Buy this is to change brake fluid, brake fluid change is inevitable after you will go in the air, before all manual venting, with the feeling after this very convenient, with a syringe pump are out on the air. Much faster than the manual. In order to enhance the durability, on the change of a glass bottle.Powered by Google TranslatorView Detail
Excellent
strongI used it to remove and install the spring from the pipe of the Full Exhaust System.
It was easy to work with because it was sturdy and easy to hold.
The easy-to-grip grips make it easy to apply force and pull even strong springs.View Detail
Terrible
Air bleeding is usually quicker!Double disk If you are planning to use it on a car, it is usually faster to do it only with Air hose.
When pulling out with a syringe, Tank collapses at about 10 times (lol
Breather Valve will do the air bite and do it ~
Oh, I wasted another waste ...
View Detail
Average
Tank loses negative pressure ...I used it for Brake fluid exchange of Daytona 675R.
Usability is not bad (It is better not to use Cylinder but Gun type negative pressure Pump better ...) Although it is fatal that the Fluid Tank of the polyethylene container loses the negative pressure!
If I lose to negative pressure I will not get out of Fluid and if I relax BreederValve to make it easier to remove Fluid, I will remove the air ...
Since there was no choice, we decided to exchange the Brake lever in the usual way to negotiate.
Just by replacing Tank with a material that can not defeat the negative pressure, ease of use improves greatly, so I expect improvement.View Detail
Other Reviews From Japanese Webike user
Excellent
Radipon handled in Mild?attachment
The CBR650R is mounted at the same position angle as the NORMAL.
However, when the handlebar was cut to the Left lock, it interfered with the interior cover next to the Meter, so the interior cover was cut away.
I also purchased a 45° angled banjo adapter for the mesh hose to accommodate the tension of the mesh hose.
・NORMAL (Reserve integrated horizontal master) Impressions of
No complaints on public roads. Familiar feel and very easy to handle.
However, when the brake is set to "hard brake," the rate of increase in braking force relative to the input seems to decrease, and the brake becomes more forceful.
Radipon (Reserve separate body portrait master) Impressions of
It was totally different from what I expected, my expectation was that it would feel like a Rear brake…
It is really a mild and easy-to-handle radipon.
On public roads, it feels like NORMAL! I wonder if it's because NORMAL is the same NISSIN?
But I felt the radipon effect from Breaking a little stronger, and
It can be hung up to a hard brake without effort.
I felt trust that this could stop.View Detail
Very Good
packtalk bold Attached MountI purchased this for use with multiple Helmets. 。
Mount included with the BOLD.
Microphone and speaker are not included and must be purchased separately.View Detail
Excellent
Grip replacementGrip that had been used for a long time was worn out and had to be replaced.
They are soft and dampen vibration.View Detail
Very Good
Works well in everyday life[How is it used?
Used to lick Screw loose.
Was the one you received as per Image?
As per Image.
How was your experience with it?
When used on a strongly tightened Screw, it can be safely and securely removed.
The licked Screw was removed.
It is also useful for DIY Screw removal.
[Points to note]
When used on a licked Screw, it is best to beat it in with a Hammer before use.View Detail
?
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING