I bought this to replace the dark OEMLight on my HORNET250.
As it turns out, I'm really glad I changed them because they look so much brighter.
There is no distortion of the optical axis and the brightness is no different from the recent OEMledMotorcycle.
It was a little difficult to make a gap between the cable and the battery, but I was able to install it without disturbing the appearance. (Left Side of Tank) I fixed it with SpongeDouble-sided Tape and Band which came with the frame. But it is easier to remove the Tank when you fix this. (It's not impossible to do without removing it, but it's pretty annoying)
The work can be finished in two to three hours.
The work is laborious there, but if even the installation goes well, I can use it without a problem without the Light being cut off so far though it has passed about two years.
It's a little pricey, but I thought it was a hundred times better than the OEM one with poor visibility!
It has been a year since it was installed and there was an inspection of the car in between
First of all, the brightness is much brighter than the Halogen, and I don't have to worry about driving at night It also works well with the OEM Reflector
However, because of NAKED, the part where cords are collected on the back of the headlight is exposed It's not a problem But I usually wear a Bikini cowl, so it's not a problem..
It's stable and I recommend it!
View Detail
When the product arrives and lights up when it arrives LOW will turn on all (Lol)
HI only turns on HI.
Call DAYTONA and send items to the store ....
It is regrettable as it has been trusted.View Detail
I am envious of HIDHeadlight who always runs together, and it was coloring LED Headlight.
MT-07 was severely installed Space, I was looking for it from RibbonType.
This item is installed with Large durable, but the information source is 2channel (Lol) So I tried to buy with gamble like unreliable. If you do not have it, you can attach it to CYGNUS X.
The replacement work was easy.
I think that you can do it if you have a sphere replacement score kill.
Clearance is tough, but (See picture) It is safe without interference.
The Controller part got lost, but I decided to Tie Wrap Fixing for FFork.
The image pastes high beam H4 ball and LED illumination.
Although I went on a real run, it might be bright with H4 ball comparison - - - I was expecting it to be more bright.
I think that I have made excessive expectations.
I do not ride basically at night, but Tunnel and others became easier.
Position lamp also exchanged color temperature uniformly.
Although it was a slightly expensive shopping, I tried hard by buying a DAYTONA product and purchased it.
Although it is the first LED Light purchase, it is almost satisfactory.
View Detail
It will be changed from S company LED.
In the case of Company S, I did not know where it was shining
This product shines well in front, considering security and oncoming cars
I think that it was good to purchase, I think that it was still better if the price was a bit cheaper.
Perhaps there is no choice if you consider driving at night.
The vehicle will be MT - 09, but Heat sinketc. Without interference
I was able to install it more easily than I thought.View Detail
It is transfer from HID
Although HID also passed inspections, glare took place and Cutline got out but the sign was reflected and I felt hard to see.
I was worried about SYGN HOUSE's new LRibbon, but I chose this because of the comfort of forced cooling by the fans and the brightness using the entire Reflector with High beam.
At first it is a combination with PIAA's Multi-reflector which was also used for HID.
Low beam Very nice Cutline Perfect too.
Both in the distance and evenly, it is very bright.
You can raise the full score 100 points.
However, High beam was a bad idea.
It is bad compatibility with Reflector, it feels like a lighting with a cheap flashlight.
I thought that it was tangerine, I bought a multi-reflector made by DAYTONA with a certificate that I went through a vehicle inspection in combination and combined it.
Although Low beam gave the brightness one step to PIAA, it felt wider than the overall irradiation range.
High beam is also slightly weaker than the one of PIAA although the front is slightly weaker.
Probably the vehicle inspection will also be Large durable.
Absolute light quantity gives one step to HID, but it is feeling that it is enough to compensate sufficiently by the goodness of Cutline.
Installation is simple.
WaterproofBoots processing is not included.
However, since Cable is short, I could not put Ballast under Seat, and fixed it to Frame with the attached Double-sided Tape.
I also want Extension Cable as Option.
For now it's time to find a brilliant Light that you want to finish.
View Detail
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING