Modern shields don't fog up, but they're useless for people who wear glasses, because the glasses fog up before the shield does.
For the shield, you can use the Pin Lock Seat or the Double lens shield to get an almost fog-free view.
But the..
Glasses don't work that way.
If it's a little cold (around 0℃), I can tolerate Limit, but if it's minus 10℃, it gets cloudy no matter what.
Even the slightest exhalation of breath will cloud it.
If you try to breathe through your mouth, you'll be out.
Moreover, in normal cold weather, you can use the driving wind to get rid of the fogging, but when it gets to that temperature, it's as good as it gets. "Cloudy Glasses Freeze in Place." And when that happens, even with the shield fully open, it will remain cloudy.
Even with the speed turned up, it was getting cloudier and cloudier.
This is the only device that can avoid such a worst-case scenario.
Anyway, it expels the breath all the way down, so the Glasses don't fog up.
If you can't live without glasses, this is an essential piece of equipment along with Glasses.
This is actually the third one I've purchased.
1pc. eyes eliminate and Quantity:2pc. The second set was dropped from Pocket, so I bought it again.
It's a waste of money, but it's required equipment, so...
As for mounting, I don't use the included Velcro.
It is used by inserting it from underneath the Chin guard.
I don't want the helmet to rub against my face when I wear it, and I can get the best fitting by inserting it.
If you don't lose it, you'll be able to use it for several years, so if you're a fan of glasses, buy it!View Detail
I bought it to run on icy & snowy roads with the TDM900 in the middle of winter.
But actually, this has been going on for almost 30 years. This is it! I love to use it in situations where
This time, I bought a new Mask that I bought a long time ago because I didn't know where I had put it away, so I cried and bought it again.
It's so cheap, it won't hurt your pocketbook too much to lose it! (No, 3,000 yen is painful.)
First of all, this product is universal and SHOEI can be used with any cap.
You can also visit the SHOEI homepage "For zero. There is no mention of the following.
What does that mean?
That's right.
It works just fine with Arai.
Maybe it will work with OGK and foreign-made products, but I haven't tried it, so I won't go into it explicitly.
Now, the name may sound pompous, but this product is simply a Rubber.
It's not a bad smell when it's new, but if you look at the smell, the material is Nitrile-based...
I think you're dealing with the old man oil seeping out of your face. If my personal prediction that "I'm not going to be able to get a good oil resistance" is correct, then I'm convinced that Nitrile-based products have high oil resistance.
Well, I'm just saying that at random.
The body is a moderately resilient, thick (about 2.0mm) rubber, and the part that hits your face "Return" It is made of thin rubber (about 0.3mm) with a
In case you want to use it on an Arai (RX-7RR), you can actually use it without modification.
Compared to SHOEI, Arai's mouth is tighter than SHOEI's, so I used to cut and use the amount of Mask SIDE in the past.
However, if you use it that way, the Mask effect is definitely reduced instead of making it easier to put on and take off the Helmet, so I personally wouldn't recommend it.
It's best as it is.
Also, the product comes with Magic tape to hold the Mask in place, but I don't use it.
I don't like to put Magic Tape on the inside of the cap, and the Mask won't fall off if I don't have to stick it with that stuff in the first place.
It has never once fallen.
I've never even Gap.
If you're using Magic Tape to secure your device, you can use "Cover → "Aligning the Mask to the Face But, if it's not fixed, how to use it is "Cover → "Insert Masks from above. → "Tailor it to your face. This is the case
It's not a Large hassle, and I think it's easier to use this one, but what do you think?
Besides, according to the Instruction Manual, in the summer when you don't use Masks, you'll only have Magic tape left over, but that's not a good thing.
More to the point, I'm going to use Magic Tape on the head of my nose in the summer when putting on and taking off the Helmet, GSX400Eoooo! I'm sure you will become a person who doesn't use Magic tape if you rub it or something like that.
The key is the effect of Mask, which is already extremely Large.
Shield and other products have evolved with Double Lens and Pin Lock Seats to make them less foggy, but there's nothing I can do about the Glasses.
That's why this Mask is almost free from fogging.
At least your own breath doesn't fog up your glasses.
(The glasses still fog up not because of your breath, but because the moisture from your head is stuck inside the Helmet.
As for how great the performance is, the glasses don't fog up even when running in the middle of the night in the middle of winter in the middle of the night in the mountains at 15 degrees Minus.
At temperatures like this, your exhaled breath will condense in the Mask and lice will drip from underneath the Helmet's chin, but it still doesn't fog up, so it's not too bad.
If you're having trouble with your glasses fogging up, you should definitely buy one!
And finally, the only weakness in this product...
That's because when you take off your Helmet, you'll have traces of Masks on your face.
The edge of the Mask is close to your face to prevent your breath from escaping, so of course it leaves a reddish streak from your nose to both SIDE of your mouth.
It's a bit of a thing with the Helmet, but if you use it to commute to work and change clothes at work, for example, you'll look pretty dumb.
It doesn't matter if you don't mind, though.View Detail
I'm using it on my ARAI Tour cross3, which I use for commuting
I've been using it for years and this is my third one now
I think it can be mounted on a variety of Helmets if there's enough room at the tip of the nose, like the OFF Helmet
This is a product that lets you know that the best way to prevent fogging when it's cold is to not raise your own breath to the top
But I don't fix it and put it on every time I put the Helmet on, so I've lost it twice before
Be careful if you use it in the same way
View Detail
Introduced to Quantum J of ARAI as a countermeasure against fogging (Lol)
That's Universal.
After all, cloudiness also put Pin Lock Seat, so the effect of that is Large I wonder?
It is getting colder and colder, so I expect it as a measure against cold (Lol)
later. I feel something wrong when my mouth is covered (Lol)View Detail
I attached it to QWEST of SHOEI and tried running for about 2 hours in the outside air temperature 6 ~ 9 ° C.
Helmet comes with a bonus, with no Pin lock nor Breath guard attached, it's wearing only Air Mask 2.
As a result, while traveling as a matter of course, even while keeping the Shield waiting for a signal, Glasses - Shield never cloudy at all.
Although it is a simple shape, it does not breathe in as good as Fit to the face as much, it is wonderful.
People who use Glasses should buy, especially because they do not cost so much (Lol)
The following points are MinusPoint for the most.
- When wearing Helmet, it is annoying to hit the face.
- Is it a material or a release material? It slightly smells scientific substances. If I washed it a lot and left for a while for a while, I became little obsessed, but those who are interested may be interested.View Detail
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING