Material is thin and strength is a little uncertain
Material:I like that it's Stainless Steel.
* The BEST and MUST store to find Japanese parts.
* Register now for amazing deals and other special offers!
* Over 800,000 listed items. It's hard NOT to find your parts.
Congratulations! Your new account has been successfully created! You can now take advantage of member privileges to enhance your online
shopping experience with us. If you have ANY questions about the
operation of this online shop, please email Webike through CONTACT US.
A confirmation has been sent to the provided email address. If you
have not received it within the hour, please contact us.
Material is thin and strength is a little uncertain
Material:I like that it's Stainless Steel.
Fits: HONDA CB1300 SUPER BOLDOR 06-07, HONDA CB1300 SUPER BOLDOR 08-13, HONDA CB1300SF 05-07, HONDA CB1300SF 03-04, HONDA CB1300SF 03-13
Now if there is a difference in width size of the radiators I had to re-drill the holes on the side brackets by about 5mm each side then the cover slotted over nice and tight so expect there could be some adjustment needed View Detail
It is very good, it very fit to the bike to make it be smart and the shipping is good too , it fast and the packing are very good too. View Detail
Fits: HONDA CB1300 SUPER BOLDOR 06-07, HONDA CB1300 SUPER BOLDOR 08-13, HONDA CB1300SF 05-07, HONDA CB1300SF 03-04, HONDA CB1300SF 03-13
[How is it used?
Looks good but peLePera-like.
Was the one you received as per Image?
Yes, I have. I just want it to feel a little more rigid or solid.
Was the installation difficult?
Easy
How was your experience with it?
PeLePera-like
[Included Parts:were they on?
[Was there anything that disappointed you?
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the ManufacturerView Detail
Fits: BMW S1000RR 10-11, BMW S1000RR 12-14, BMW S1000RR 15-16
I bought this to prevent RadiatorCore from collapsing.
The Motorcycle I used to ride didn't have such a Guard, and that's why the fins would get crushed by stepping stones, etc. and not cool → going to the verge of Overheat!
I bought it as a Risk hedge because I was in a bit of pain.
The price is a little more effective than other manufacturers, but the product itself is thin and flexible.
Therefore, it fits to RadiatorCore which is slightly curved, and the adhesion is good impression.
Also, because it is a dedicated product, the position and dimensions of the holes for installation are just right.
I have used it for about 2 years and it works well. There is almost no Core crush and Protection performance seems to be good.
If I mention a point to be careful, it is attention to the injury at the time of the installation. As you can see in the description, the thinness of the product makes it easy to cut the edge, so it is better to avoid working with bare hands.
It is better to wear military or mechanical gloves for protection before working.View Detail
Parenthesis is good
But the accuracy is too bad, I have to bite the Washer and do some other things to make it deflect and scare.
I can't believe the price of this product.
The ones I purchased were not horizontal mounting holes and were not adjustable.
As for what others have said about the mounting part being white, it can be removed quickly with the protective seat.View Detail
Purchased for regular replacement.
If it were a little cheaper, I could get a stable replacement...View Detail
?attachment
The CBR650R is mounted at the same position angle as the NORMAL.
However, when the handlebar was cut to the Left lock, it interfered with the interior cover next to the Meter, so the interior cover was cut away.
I also purchased a 45° angled banjo adapter for the mesh hose to accommodate the tension of the mesh hose.
・NORMAL (Reserve integrated horizontal master) Impressions of
No complaints on public roads. Familiar feel and very easy to handle.
However, when the brake is set to "hard brake," the rate of increase in braking force relative to the input seems to decrease, and the brake becomes more forceful.
Radipon (Reserve separate body portrait master) Impressions of
It was totally different from what I expected, my expectation was that it would feel like a Rear brake…
It is really a mild and easy-to-handle radipon.
On public roads, it feels like NORMAL! I wonder if it's because NORMAL is the same NISSIN?
But I felt the radipon effect from Breaking a little stronger, and
It can be hung up to a hard brake without effort.
I felt trust that this could stop.View Detail
I purchased this for use with multiple Helmets. 。
Mount included with the BOLD.
Microphone and speaker are not included and must be purchased separately.View Detail
Grip that had been used for a long time was worn out and had to be replaced.
They are soft and dampen vibration.View Detail
[How is it used?
Used to lick Screw loose.
Was the one you received as per Image?
As per Image.
How was your experience with it?
When used on a strongly tightened Screw, it can be safely and securely removed.
The licked Screw was removed.
It is also useful for DIY Screw removal.
[Points to note]
When used on a licked Screw, it is best to beat it in with a Hammer before use.View Detail
To continue viewing this product on Japan domestic webike (in Japanese), press "Go to Japan Domestic".
Customer Service
INFORMATION
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING