?
outline
Hook bolt for Maintenance Stand.
Reason for purchase
I decided to buy a J-trip Rear Maintenance Stand, so I decided to buy a Hook bolt that is compatible with the Rear Maintenance Stand also made by J-trip. If you use J-trip's Hook bolt, you need to be careful because the shape of the Hook bolt may not match with other company's one.
In addition, because I have seen the comment that the color falls by the wear etc. though there are various colors in Lineup, I decided on Silver color which seems not to worry about the color fading because the material is Aluminum.
Appearance etc.
HookQuantity:2pc. Set, ColorQuantity:2pc. Set, BoltM8×35 is Quantity:Comes with 2pc.
Cut-out of Aluminum2014 material.
Mounting method
The model number of the compatible Hook bolt is different depending on the type of car, etc., so we recommend you to check the official website to choose the right one. JT-107D-SL which I bought this time is compatible with ZX-10R (2021) I was able to install it on the
The STAND used is JT-125, and the receiving Bracket is a combination of V-type JT-107V1.
Please note that this product cannot be used on motorcycles that do not have a mounting hole in the Swing Arm of the motorcycle.
It is very easy to install, just put the collar in the hole of the Hook and attach it to the mounting hole of the MotorcycleBody with Bolt. You may lubricate the collar with Grease etc. I sprayed the collar with silicon spray. I think it is standard torque because there was no description of the installation torque etc. I tightened it by hand and tightened it with a tool at the end so as not to tighten too much.
Impression used
When I first shifted up, the hook receiver was a little out of the groove on the hook side, so after I shifted down, I adjusted the position of the hook receiver side to fit the hook groove and was able to use it safely.
Improvements
There are no particular problems.
Fits: TRIUMPH DAYTONA675 10- *Calipers are required to measure the hole diameter, SUZUKI Except for the GSX250FX, KAWASAKI NINJA1000 (Z1000SX) (14-)Z1000/Z800/(14-)NINJA1000:If the muffler is stock, it is strongly recommended to use the L-interface., KAWASAKI ninja 18-
It was very beautiful, more textured than expected. I am satisfied as being one point Attachment. Since Blue was in Cowl's Color, I tried matching colors.View Detail
Fits: TRIUMPH DAYTONA675 10- *Calipers are required to measure the hole diameter, SUZUKI Except for the GSX250FX, KAWASAKI NINJA1000 (Z1000SX) (14-)Z1000/Z800/(14-)NINJA1000:If the muffler is stock, it is strongly recommended to use the L-interface., KAWASAKI ninja 18-
We made it J-trip product in line with STAND
I am happy that it is easy to catch V letter
Mounting from Bolt's head
Since Hook bolt Body has a height, it seems that the possibility that Bolt's head will be scraped off when it falls by falling is probably low
I am looking at the vehicle Hook bolt snapped into Swingarm because of the falling shock, so I removed it except during MaintenanceView Detail
Fits: TRIUMPH DAYTONA675 10- *Calipers are required to measure the hole diameter, SUZUKI Except for the GSX250FX, KAWASAKI NINJA1000 (Z1000SX) (14-)Z1000/Z800/(14-)NINJA1000:If the muffler is stock, it is strongly recommended to use the L-interface., KAWASAKI ninja 18-
I think that it is a commodity of necessities in Maintenance. Select low things as consumable items. Although deterioration and dirt of Aluminum are a little worrisome, I think that it will be useful as a Slider. It is a product we are sure to attach.View Detail
Fits: TRIUMPH DAYTONA675 10- *Calipers are required to measure the hole diameter, SUZUKI Except for the GSX250FX, KAWASAKI NINJA1000 (Z1000SX) (14-)Z1000/Z800/(14-)NINJA1000:If the muffler is stock, it is strongly recommended to use the L-interface., KAWASAKI ninja 18-
It is stable at the company's STAND, it is easy to use it for V-letter reception and to hook.
Color (Red) It is also good as ColorAccent by Match with our Black Swingarm.
Although it is fate of Anodized, it will fade away in about a year.View Detail
Fits: TRIUMPH DAYTONA675 10- *Calipers are required to measure the hole diameter, SUZUKI Except for the GSX250FX, KAWASAKI NINJA1000 (Z1000SX) (14-)Z1000/Z800/(14-)NINJA1000:If the muffler is stock, it is strongly recommended to use the L-interface., KAWASAKI ninja 18-
I purchased it because it is necessary for using Maintenace Stand. Although looking coloring is good, it can be used as a function without problems, but despite purchasing a product to which Ninja 250R is applied, Screw Mountain is not matched?! It was very hard or hard to install. (Although it is Tolka, Bolt (lol) )
Those who are considering purchasing, I think that it is better to refer to the Impression overall of this product, as the above problem does not apply to your own Motorcycle.
(Although it was difficult to install, because it was able to use it without being able to do it, "Recommended" You are. )View Detail
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING