This Fuel Cock has a very nice atmosphere and Retro feel with the look and feel of the texture and dull color. The quality is good and safe to use and the Lever is easy to use and has a good SnapSnap and a solid sense of moderation.
* The BEST and MUST store to find Japanese parts.
* Register now for amazing deals and other special offers!
* Over 800,000 listed items. It's hard NOT to find your parts.
Congratulations! Your new account has been successfully created! You can now take advantage of member privileges to enhance your online
shopping experience with us. If you have ANY questions about the
operation of this online shop, please email Webike through CONTACT US.
A confirmation has been sent to the provided email address. If you
have not received it within the hour, please contact us.
This Fuel Cock has a very nice atmosphere and Retro feel with the look and feel of the texture and dull color. The quality is good and safe to use and the Lever is easy to use and has a good SnapSnap and a solid sense of moderation.
Fits: HARLEY-DAVIDSON Cars with OEMTank 75- (excludes Injection vehicles):Various Gas tanks with 21mm Nut connection type of Cook attachment opening
Snap and stop at each position of on off res, the operation feeling is very good.View Detail
Fits: HARLEY-DAVIDSON Cars with OEMTank 75- (excludes Injection vehicles):Various Gas tanks with 21mm Nut connection type of Cook attachment opening
The operation feeling is comfortable because it stops with Snap in each position. What about the durability?
This is the effect from ShovelOEM, but it is Simple and looks good!View Detail
Fits: HARLEY-DAVIDSON 75- OEMTank(Excluding Injection Tank) CookVariety of Gas tanks with 22mm Nut Connection Type.
It was adopted because of the interference that occurred when replacing the Carburetor.
If you don't want to buy a PinGel or something just for interference avoidance, I can recommend it for the Cost part.
However, it's not over or underwhelming to use, but if I had to say anything, Knob is pretty stiff. (Although I dislike PinGel's overly-smooth infinite adjustment even more.)View Detail
Fits: HARLEY-DAVIDSON 75 years and later OEMTank (Gas tanks with 21mm nut connection type cook opening *Except for injection models)
There's no Instruction Manual section, so I'll give it an overall rating of 5 for now I had a real problem with the installation
But other than that, the product itself is quite cosy, and I'm very grateful to have been able to replace it at such a price This is a product I would like to buy The shipping cost is not included in the price Small Goods Delivery Thanks to the adaptation of the product, it was delivered at a reasonable priceView Detail
I used it in combination with PinGel's Adapter plate instead of PinGel..
When installing to the Adapter plate for PinGel, 1 / The precision of the 4NPT male thread is too low and installation is difficult without Brown difficulty. It is Zama who actually jams in once and breaks.
When installing, fix the adapter plate with vice. Just put the capped chemicals, put it in a way that wears the Tap back, you have to put it back, repeat the installation.
As it is probably impossible to use a Seal tape for leakage prevention, as for Sea Ring, I'd like to deal with Gasket on the Adapter side.
Author 's United States - If it is from Pauco company it will be a little more accurate...View Detail
Purchased for regular replacement.
If it were a little cheaper, I could get a stable replacement...View Detail
?attachment
The CBR650R is mounted at the same position angle as the NORMAL.
However, when the handlebar was cut to the Left lock, it interfered with the interior cover next to the Meter, so the interior cover was cut away.
I also purchased a 45° angled banjo adapter for the mesh hose to accommodate the tension of the mesh hose.
・NORMAL (Reserve integrated horizontal master) Impressions of
No complaints on public roads. Familiar feel and very easy to handle.
However, when the brake is set to "hard brake," the rate of increase in braking force relative to the input seems to decrease, and the brake becomes more forceful.
Radipon (Reserve separate body portrait master) Impressions of
It was totally different from what I expected, my expectation was that it would feel like a Rear brake…
It is really a mild and easy-to-handle radipon.
On public roads, it feels like NORMAL! I wonder if it's because NORMAL is the same NISSIN?
But I felt the radipon effect from Breaking a little stronger, and
It can be hung up to a hard brake without effort.
I felt trust that this could stop.View Detail
I purchased this for use with multiple Helmets. 。
Mount included with the BOLD.
Microphone and speaker are not included and must be purchased separately.View Detail
Grip that had been used for a long time was worn out and had to be replaced.
They are soft and dampen vibration.View Detail
[How is it used?
Used to lick Screw loose.
Was the one you received as per Image?
As per Image.
How was your experience with it?
When used on a strongly tightened Screw, it can be safely and securely removed.
The licked Screw was removed.
It is also useful for DIY Screw removal.
[Points to note]
When used on a licked Screw, it is best to beat it in with a Hammer before use.View Detail
To continue viewing this product on Japan domestic webike (in Japanese), press "Go to Japan Domestic".
Customer Service
INFORMATION
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING