I use this product for SR400. The Brake Pads installed on the new car had been worn out after 7000km, so I replaced them with this product.
Effectiveness and controllability are almost the same as OEM.
I've driven almost 10000km since the replacement and it still feels like it's not even half way down.
I think I am running very aggressively in the mountain pass for SR400, but Brake Pads have enough performance for SR400.
The speed is only 110km/h at most, so the brake is not overloaded that much.
Maybe the braking power is not enough for sporting motorcycles with more weight and horsepower, but it is not a problem for normal use.
It is made in Japan, and it is safe, and I think that I will patronize Brake Pads of the Besra company from now on.
Fits: その他 Sport 50 09, その他 Matrix R4-150 09, その他 Matrix 50 09, その他 Breamer R4-150 09, その他 Beamer R2 50 07-08
[Usage]
I commute a little over 8km one way to work on the main road, and also use it as a footpath around the neighborhood, and travel 60km to 70km round trip a few times a month.
[Initial braking
OEM (Semi Metal) :
Pad bites disc when Brake lever is held (sticking together) I'm going to slow down by the feel of it.
Type to slow down with a bang. (However, the bite is not worried about the grip moss)
The brake does not react linearly to the input of the brake lever, but the control is not bad either.
Besra. (Sintered) :
When the brake lever is gripped, the brake feels sweet, but it doesn't have the "thump" of the OEM brake, and it decelerates smoothly.
Linear response to brake lever input.
Controlability is good
[BrakeTouch]
OEM:This is the standard.
Besra:Touch changes quite a bit and feels noticeably firmer than OEM
Braking distance】
OEM:If this is 1
Besra:0.9 place (Stops somewhat shorter than OEM)
I didn't measure it, so it's just a feeling.
[For use on rainy days
OEM:I don't feel any difference in braking power from Dry in terms of feel.
Vesrah:Not used in the rain, but I don't think you can feel the difference in braking power between this and Dry.
Fading resistance
I don't have any experience of hard breaking or continuous long downhill breaking with either OEM or Besra products, so I don't know.
The Besra is a Sintered pad, so it will have better resistance to Fading at high temperatures!
How did it compare to other products?
The OEM Product has about 1mm remaining at about 2,800km. The usage is not to fly especially in the place where there are many Go& Stop, and there is no hard Brake operation.
Life is unknown because the Besra product has not been replaced for a long time. (Hence, no durability rating)
I'm hoping Life is longer than OEM.
[Others]
I think it's a matter of individual difference, but after the replacement, some brake squeal occurred.
The squealing stopped around the time that Pad and disc seemed to hit, and it hasn't occurred since.View Detail
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING