2.66 USD
(403 JPY)
3 (2 Reviews)
Very Good
It's so cheap!When you are working on the inside of Engine or Suspension, you will often find a scene that you want to build it while lubricating it a little with Oil, or you want to run it after dripping Oil a little.
Until now, I've been using a plastic container that I bought for 100 yen (it's a special product for Oil), and I had no complaints, but "Wouldn't it be a waste of Cool if I plug in Oil like this?" I bought it for the insolent reason that
From the name, I'm sure it's made of iron, so if it gets used and BlackRust comes out, it'll be even cooler. Duh!
But... the hole diameter of the tip of Nozzle is too large, so it's hard to use it as usual!
Simply put, too much Oil is produced.
If you want a more delicate oil, the 100 yen Bottle is much better.
But when you build an engine, for example, you can change Camshaft to Quantity:This kind of Oiler should be much more efficient when doing Set.
If you want to lubricate in 5cc increments, that's fine, but I was hoping to choke it out in 1cc increments.
In short, it was not suitable for my use.
Regrettable.
Reviews For Unit Steel Oiler From Other Webike User
Most Viewed Reviews Of Unit Other Tools
Excellent
Pleasant to useThe Motorcycle shop has Build it yourself from the Gold plate." But I was not confident that I could produce something satisfactory, so I bought it.
After switching from CRF150R to YZ250FX, I had frequent fork oil leaks and consulted a motorcycle shop. Let's remove the Dust Seal and clean it after every ride." This was the case
The angle of the handle, the shape of the blade tip, and the thickness of the blade are exquisite, and the Dust Seal comes off with a light pry. The stability of the seal when applied to the seal is outstanding and I have never had a failure.
I think a slotted screwdriver would do the job, but the Dust Seal would be deformed and at worst damage the Inner Tube or other components.
It's a quintessential exclusive!View Detail
Other Reviews From Japanese Webike user
Excellent
Radipon handled in Mild?attachment
The CBR650R is mounted at the same position angle as the NORMAL.
However, when the handlebar was cut to the Left lock, it interfered with the interior cover next to the Meter, so the interior cover was cut away.
I also purchased a 45° angled banjo adapter for the mesh hose to accommodate the tension of the mesh hose.
・NORMAL (Reserve integrated horizontal master) Impressions of
No complaints on public roads. Familiar feel and very easy to handle.
However, when the brake is set to "hard brake," the rate of increase in braking force relative to the input seems to decrease, and the brake becomes more forceful.
Radipon (Reserve separate body portrait master) Impressions of
It was totally different from what I expected, my expectation was that it would feel like a Rear brake…
It is really a mild and easy-to-handle radipon.
On public roads, it feels like NORMAL! I wonder if it's because NORMAL is the same NISSIN?
But I felt the radipon effect from Breaking a little stronger, and
It can be hung up to a hard brake without effort.
I felt trust that this could stop.View Detail
Very Good
packtalk bold Attached MountI purchased this for use with multiple Helmets. 。
Mount included with the BOLD.
Microphone and speaker are not included and must be purchased separately.View Detail
Excellent
Grip replacementGrip that had been used for a long time was worn out and had to be replaced.
They are soft and dampen vibration.View Detail
Very Good
Works well in everyday life[How is it used?
Used to lick Screw loose.
Was the one you received as per Image?
As per Image.
How was your experience with it?
When used on a strongly tightened Screw, it can be safely and securely removed.
The licked Screw was removed.
It is also useful for DIY Screw removal.
[Points to note]
When used on a licked Screw, it is best to beat it in with a Hammer before use.View Detail
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING