[How is it used?
I was looking for a product that is compatible with the hand guard, and decided on this product that has a mechanism to fix to the guard.
This is my impression after 3Season.

Was the one you received as per Image?
The size is large for hand guards, and it is made to be firm so that it will not lose its shape.

How was your experience with it?

I use it with a wide entrance to keep my hands in and out, but it is very easy to keep the wind out.

[Points to note]
The fitment is listed on the DirtFreak site, so please check before you buy. I was able to install the Hand guard though it was a Chinese No Brand product.
The installation is wrapped with Velcro, but you need to be creative because there are individual differences in each vehicle. There is a video of the installation, so it would be good to refer to it.
When I installed it, I was worried about the wind that blew in from the gap that was made between Wire, Hose and Handlebar, so I softly wrapped Dustcloth around it and it was suppressed considerably.

How did it compare to other products?
When I bought it, I compared it with the RR5927 of the Rough AndRoad company which also claims to be compatible with the Hand Guard, but the fixing mechanism to the Hand Guard and the ease of inserting and removing the hand were the deciding factors. If it is said warmth, the feeling of the rough AndRoad company was higher.View Detail

Purchased for winter Offfor Vehicle.
Installation is almost the same as the normal Hand guard, but if there is a different part, there is a work to install the Hand guard part with Velcro.
However, thanks to this, the Hand guard itself doesn't break down and I can concentrate on riding now.

Wind protection works reasonably well, but some wind blows in from the seams, so it may not be suitable for a bare-knuckle style under the Cover.
Grip heater etc...unless it comes with a grip heater…View Detail

You can cover it, but the size is too short to cover all the hands
It's better than nothing, but considering the price, I'm not sure it would have been any better
It's not easy to handle as the flap is also attached to the blinker by Velcro Yes The fixation didn't feel right eitherView Detail

When purchasing a hand warmer, you should be aware of the length of the Velcro, the size of the hand slot and the size of the Velcro We have considered such things as the size of the tree
Sorry for the poor explanation, but this kind of product has two types:the Large glove-like type and I think there are two types, like the Handlebar Cover and the Type
This product is the latter
It's different for each person who uses it, but the former is cheaper and the latter is more expensive, but you can get your hands in and out of the Touring I decided on the latter because I thought about doing
I was confused between the rough AndRoad and zeta, but the Velcro at hand seemed to be longer and the opening I made a zeta that seems to be Large
magic that can be fixed to the Hand guard itself, because it is for Off-Road There is also a tape, which is especially recommended for Off
Of course, you can also use it on
The important thing to remember is that the wind is blocked, so it's hard for your fingers to get cold
Well, this will be the same for all productsView Detail

It's installation of SEROW at the company's Hand guard and ZERO-G Cover.
It is in a state where it is combined with Yamaha OEM's Grip heater. (Lol)
Unlike other products, the entrance is somewhat wider, so cold wind comes in from there, but I do not mind that much.
Rather it is easy to put in and take out.View Detail

Purchased for regular replacement.
If it were a little cheaper, I could get a stable replacement...View Detail

?attachment
The CBR650R is mounted at the same position angle as the NORMAL.
However, when the handlebar was cut to the Left lock, it interfered with the interior cover next to the Meter, so the interior cover was cut away.
I also purchased a 45° angled banjo adapter for the mesh hose to accommodate the tension of the mesh hose.
・NORMAL (Reserve integrated horizontal master) Impressions of
No complaints on public roads. Familiar feel and very easy to handle.
However, when the brake is set to "hard brake," the rate of increase in braking force relative to the input seems to decrease, and the brake becomes more forceful.
Radipon (Reserve separate body portrait master) Impressions of
It was totally different from what I expected, my expectation was that it would feel like a Rear brake…
It is really a mild and easy-to-handle radipon.
On public roads, it feels like NORMAL! I wonder if it's because NORMAL is the same NISSIN?
But I felt the radipon effect from Breaking a little stronger, and
It can be hung up to a hard brake without effort.
I felt trust that this could stop.View Detail

I purchased this for use with multiple Helmets. 。
Mount included with the BOLD.
Microphone and speaker are not included and must be purchased separately.View Detail

Grip that had been used for a long time was worn out and had to be replaced.
They are soft and dampen vibration.View Detail

[How is it used?
Used to lick Screw loose.

Was the one you received as per Image?
As per Image.

How was your experience with it?
When used on a strongly tightened Screw, it can be safely and securely removed.
The licked Screw was removed.

It is also useful for DIY Screw removal.

[Points to note]
When used on a licked Screw, it is best to beat it in with a Hammer before use.View Detail