4.61 USD
(700 JPY)
3.85 USD
(584 JPY)
(16% OFF)
4 (4 Reviews)
Excellent
SeatRepair can be done easily just by putting it on.
This product can easily repair a torn Seat, it is Seal type so it is easy to apply and easy to cut even for Scissors.
Reviews For DAYTONA Repair Seat Material From Other Webike User
Average
To Seat repair of GILERA RUNNER - - -GILERA RUNNER makes the tip of Seat easy to break. I bought it as for Repair of its tip part.
good point
- Easy to wear because it just sticks
A bad point
- It is difficult to color
- It is difficult to paste at a tip portion or a plane
Although a little bit different in taste, it is not understood if it is seen from a distance. It has not peeled even after three months..View Detail
Excellent
since the sheet of MTX125R had lost aged deterioration, it purchased to repair -- it is ! as it cuts and sticks, although it was slightly anxious,
Although it worried about the color since the color of the sheet from the first which carried out well adsince the sheet of MTX125R had lost aged deterioration, it purchased to repair -- it is ! as it cuts and sticks, although it was slightly anxious,
Although it worried about the color since the color of the sheet from the first which carried out well adhesion fairly was blue -- Beige is used after all,
From moreover, after the paint application carried out to painting by sheet dyeing Q of the company stops being conspicuous, and The raw material of not only a satisfactory color but a sheet,
Although it is cheaper than the 1000 yen fellow who sold to whether it says, and coarseness and the home center which thinks that to try to like to narrow also being chosen and suiting the sheet of its own motorcycle is found and the sheet re-covering which was completely good also regards texture as the best,
It will play an active part, when it is also called -- to use the motorcycle for daily use to there.View Detail
Most Viewed Reviews Of DAYTONA Other Seat Options / Repair Parts
Excellent
Хорошо Отлично Подошёл идеально. Мой PCX125 Удобно расположить документы, перчатки и т. д. РекомендуюFineIt went perfectly.My PCX125Conveniently arrange documents, gloves, etc.Recommendtranslated by Google TranslatorView Detail
Excellent
To fill in the gaps in SeatWhen I put Tandem grip on my XJR400R (20074), there is a gap.
I was wondering if there was any way to fill the gap and I came across this product. It is made by DAYTONA, so you can be sure of the quality.
You can fill in the gaps easily because you just cut it to the required length and paste it according to the shape of Seat.
Also, it can be converted to somewhere other than Seat gap
The only drawback is the high price.View Detail
Excellent
Where you want strength.I used it where Cowl is cracked.
Cracks that are just straight up and down, or where the Cowl is completely cracked to the three-dimensional part that holds it in place.
Since I used it for the first time, I used a large amount of liquid to repair the area around the bolt hole, which I applied first, because I wet the area with the liquid all around as explained, and I stained it, but after curing, I can see the feeling that it is firmly attached, so it seems to have more effect than I wanted.
Because I reflected on the failure, and the part of the second small crack dripped and used only a necessary part, I was able to install it beautifully without Cowl becoming dirty.
I was wondering if I should use Seat for the part that is another three-dimensional, but I don't know if I should try it once, so I tried it and there is no problem with this part.
If you just stick it here, it will be stretched and floating.
1 Cut into the required size
2Only the protective Seat is peeled off, and the cut is put in the place where it becomes taut according to the adhesive part, and it eliminates it.
3 Cut the Repair seat according to the cutout of the protection Seat
4Prepare a thin object so that you can attach it firmly to the back where your fingers cannot reach.
If you do this, you can do Image pasting with protective Seat, so you don't have to fail than doing without thinking.
Just be careful that you don't make cuts for these parts of the Poly Seat as well, or it will look messy.
As for the curing time, I worked in a place where the temperature was 20 degrees Celsius and the sun didn't shine, and even I, a clumsy person, was in time to put it to the desired place.
If there is a complaint, it is that there is no Black in color.View Detail
Other Reviews From Japanese Webike user
Excellent
Radipon handled in Mild?attachment
The CBR650R is mounted at the same position angle as the NORMAL.
However, when the handlebar was cut to the Left lock, it interfered with the interior cover next to the Meter, so the interior cover was cut away.
I also purchased a 45° angled banjo adapter for the mesh hose to accommodate the tension of the mesh hose.
・NORMAL (Reserve integrated horizontal master) Impressions of
No complaints on public roads. Familiar feel and very easy to handle.
However, when the brake is set to "hard brake," the rate of increase in braking force relative to the input seems to decrease, and the brake becomes more forceful.
Radipon (Reserve separate body portrait master) Impressions of
It was totally different from what I expected, my expectation was that it would feel like a Rear brake…
It is really a mild and easy-to-handle radipon.
On public roads, it feels like NORMAL! I wonder if it's because NORMAL is the same NISSIN?
But I felt the radipon effect from Breaking a little stronger, and
It can be hung up to a hard brake without effort.
I felt trust that this could stop.View Detail
Very Good
packtalk bold Attached MountI purchased this for use with multiple Helmets. 。
Mount included with the BOLD.
Microphone and speaker are not included and must be purchased separately.View Detail
Excellent
Grip replacementGrip that had been used for a long time was worn out and had to be replaced.
They are soft and dampen vibration.View Detail
Very Good
Works well in everyday life[How is it used?
Used to lick Screw loose.
Was the one you received as per Image?
As per Image.
How was your experience with it?
When used on a strongly tightened Screw, it can be safely and securely removed.
The licked Screw was removed.
It is also useful for DIY Screw removal.
[Points to note]
When used on a licked Screw, it is best to beat it in with a Hammer before use.View Detail
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING