3.61~ USD
(547 JPY)
4 (9 Reviews)
Excellent
Silencer can be fixed with Firmly!The spring is so sturdy that it is difficult to extend it!
Reviews For K-CON Silencer Spring (Stainless/Swivel Hook Type) From Other Webike User
Average
Replacement partI exchanged because the rust of Spring of FMFSilencer is severe.
Although it is cheaper if it is not SUS, it is also a place where heat is applied and I chose SUS for rust prevention.
It's pretty hard so it's hard to install, but because SwivelType is somewhat easier to install.View Detail
Excellent
Usage is differentI added Rear Sets and Brake's return spring ceased to be attached, so I tried it here.
The result was Large Satisfied! One Side stopped at footpeg, another side at Frame with Tie Wrap, and it was safe return spring.
Spring of Home center Spring Because the linear shape is thin and the attachment part is Vakka shape, I could not use it as a hook, so it was really nice to have a product like this one.
By the way, the mounting part of Tie Wrap is slightly bent, so it is different from the actual shape.
If used systematically, I use it other than Silencer spring. As Spring, it is hard to rust with stainless steel, and it is recommended because it is easy to process!View Detail
Excellent
Spring with tightnessIn order to raise the angle of the Exhaust System, since a Joint is put in it, a long Spring is required.
I used Spring outside the application, but it seems I've run out.
For commercially available Spring, it is best up to 120 mm?
Since 120 mm and 140 mm are necessary this time, Quantity 9x55 and 9x65 : I used 2pc each.
After all dedicated Spring has a different strength!
Tensile strength also increased, so it seems likely not to cut so much.
Also, Swivel hook is very easy to install.View Detail
Most Viewed Reviews Of K-CON Exhaust Spring
Average
Replacement partI exchanged because the rust of Spring of FMFSilencer is severe.
Although it is cheaper if it is not SUS, it is also a place where heat is applied and I chose SUS for rust prevention.
It's pretty hard so it's hard to install, but because SwivelType is somewhat easier to install.View Detail
Excellent
Usage is differentI added Rear Sets and Brake's return spring ceased to be attached, so I tried it here.
The result was Large Satisfied! One Side stopped at footpeg, another side at Frame with Tie Wrap, and it was safe return spring.
Spring of Home center Spring Because the linear shape is thin and the attachment part is Vakka shape, I could not use it as a hook, so it was really nice to have a product like this one.
By the way, the mounting part of Tie Wrap is slightly bent, so it is different from the actual shape.
If used systematically, I use it other than Silencer spring. As Spring, it is hard to rust with stainless steel, and it is recommended because it is easy to process!View Detail
Excellent
Spring with tightnessIn order to raise the angle of the Exhaust System, since a Joint is put in it, a long Spring is required.
I used Spring outside the application, but it seems I've run out.
For commercially available Spring, it is best up to 120 mm?
Since 120 mm and 140 mm are necessary this time, Quantity 9x55 and 9x65 : I used 2pc each.
After all dedicated Spring has a different strength!
Tensile strength also increased, so it seems likely not to cut so much.
Also, Swivel hook is very easy to install.View Detail
Other Reviews From Japanese Webike user
Excellent
Radipon handled in Mild?attachment
The CBR650R is mounted at the same position angle as the NORMAL.
However, when the handlebar was cut to the Left lock, it interfered with the interior cover next to the Meter, so the interior cover was cut away.
I also purchased a 45° angled banjo adapter for the mesh hose to accommodate the tension of the mesh hose.
・NORMAL (Reserve integrated horizontal master) Impressions of
No complaints on public roads. Familiar feel and very easy to handle.
However, when the brake is set to "hard brake," the rate of increase in braking force relative to the input seems to decrease, and the brake becomes more forceful.
Radipon (Reserve separate body portrait master) Impressions of
It was totally different from what I expected, my expectation was that it would feel like a Rear brake…
It is really a mild and easy-to-handle radipon.
On public roads, it feels like NORMAL! I wonder if it's because NORMAL is the same NISSIN?
But I felt the radipon effect from Breaking a little stronger, and
It can be hung up to a hard brake without effort.
I felt trust that this could stop.View Detail
Very Good
packtalk bold Attached MountI purchased this for use with multiple Helmets. 。
Mount included with the BOLD.
Microphone and speaker are not included and must be purchased separately.View Detail
Excellent
Grip replacementGrip that had been used for a long time was worn out and had to be replaced.
They are soft and dampen vibration.View Detail
Very Good
Works well in everyday life[How is it used?
Used to lick Screw loose.
Was the one you received as per Image?
As per Image.
How was your experience with it?
When used on a strongly tightened Screw, it can be safely and securely removed.
The licked Screw was removed.
It is also useful for DIY Screw removal.
[Points to note]
When used on a licked Screw, it is best to beat it in with a Hammer before use.View Detail
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING