?
I thought I was sitting comfortably in the middle.
Before I knew it, I was sitting closer to the front until my crotch hit the Tank....
A common OEMSeat complaint about the GSX1400.
GSX1400Owners overseas seem to be complaining quite a bit, as is the norm overseas.
There are many external seats and custom seats available in the market, but FOR JAPAN MODEL is using this DAYTONA made seat.
COZY." Seat can fix it!
Better footing would be an advantage, but the Seat position wouldn't be so far forward!
The advantage is that it is more Large.
It also significantly reduces the pain in the buttocks felt in the normal seat when touring for long periods of time.
I also like the sleek design that gives a sense of unity from Seat to Rear cowl!
Seat is a must for those who are dissatisfied with Normal seat.
However, Fake. There are a lot of "used" ones out there, so be careful when you're buying used ones!
Seat fabrics that look just like COZYSeat are sold at low prices, and NORMAL reupholstery is also available.
We see many of them, and COZY." We also have a VERSION COZYSeat without engraving.
Nor can it be judged solely on the basis of the engraving.
Please look carefully at the shape etc. to determine if it is genuine.
Fits: SUZUKI GSX1400 01 GY71A [Frame No.]GY71A-100001 or later, SUZUKI GSX1400 02 GY71A [Frame No.]GY71A-101598 or later, SUZUKI GSX1400 03 GY71A [Frame No.]GY71A-101960 or later, SUZUKI GSX1400 04 GY71A [Frame No.]GY71A-102248 or later, SUZUKI GSX1400 07 GY71A [Frame No.]GY71A-103926 or later
The most purpose that I changed to this Seat was the improvement of the maneuverability. although the ride of OEMSeat is good, I felt uncomfortable every time I rode because the seat position was easy to gap at the front end of Seat. I can enjoy riding without stress. I recommend it because it is comfortable to ride.View Detail
![[Webike Monitor] It Attaches and is . A feeling o...](https://global-fs.webike-cdn.net/photo/article/49/1347629117449M.jpg)
Fits: SUZUKI GSX1400 01 GY71A [Frame No.]GY71A-100001 or later, SUZUKI GSX1400 02 GY71A [Frame No.]GY71A-101598 or later, SUZUKI GSX1400 03 GY71A [Frame No.]GY71A-101960 or later, SUZUKI GSX1400 04 GY71A [Frame No.]GY71A-102248 or later, SUZUKI GSX1400 07 GY71A [Frame No.]GY71A-103926 or later
Attaches and is
. A feeling of an attachment Fit which is termination by attachment being dramatically easy and not taking 3 minutes,With full marks Although it carried out in sushi and dissatisfaction has stopped the sheet
[Webike Monitor] It
Attaches and is
. A feeling of an attachment Fit which is termination by attachment being dramatically easy and not taking 3 minutes,With full marks Although it carried out in sushi and dissatisfaction has stopped the sheet place with the Tucker to elaboration of details only in a few Only a few had mind that 引っ tension is insufficient (backmost part). Although it is with a
using feeling
3cm Down,The hips were [ since oneself who did not have a thing / a thing / the hips become painful although only the Touring grade has still ridden half a day that became very good with the guide peg for which I feel that it became very low, and the Position became easy had weight fairly, ] painful when it was a Normal seat, and it rode half a day also.Since a long distance is run in a few days, it is pleasure.View Detail
Fits: SUZUKI GSX1400 01 GY71A [Frame No.]GY71A-100001 or later, SUZUKI GSX1400 02 GY71A [Frame No.]GY71A-101598 or later, SUZUKI GSX1400 03 GY71A [Frame No.]GY71A-101960 or later, SUZUKI GSX1400 04 GY71A [Frame No.]GY71A-102248 or later, SUZUKI GSX1400 07 GY71A [Frame No.]GY71A-103926 or later
If it is those who have a margin in the physique, the location which sits down by resitting down frequently is changeable, but when the physique is l
Although the sheet of a normal seat itself is not bad, the place which sits down has inclined forward.
If it is those who have a margin in the physique, the location which sits down by resitting down frequently is changeable, but when the physique is last-minute me (168 cm), while considering the time of a stop always sitting on the foremost end, power is applied in the direction slid down toward a front all the time.
Then, it will sit on the very narrow point, and only in about the same place, pressure is applied and it is becoming painful.
Moreover, it was a limit also with the guide peg.
Under the pressure of necessity, it purchased from such a situation.
Since the bearing surface is horizontally near, sliding down in front is lost and it is satisfactory.
It is also related with a guide peg, and it is preeminent for the effect of a 30-mm down, and the uneasiness also of the left end of a road is lost.
A sheet is hard and the riding taste becomes a solid.
Sas's motion also comes to be felt for a direct.
But it is not moved by the wind that cushions are insufficient.
I think that he can feel easy since there is no intention to slide suddenly even if facing deposits the body.
Although it was worried about whether a cutback becomes it heavy that a seating position falls, there is no problem and it became rather easy.
a position can be freely changed now forward and backward, and the fatigue at the time of a long-distance race line also becomes empty -- I think that there is nothing.
Although he would like to lower a handle position a little, it is not narrow to me whose body is not large. [ of the location of a step ]
About the portion which is rising toward the tandem seat, it is too far from depositing the body in that climax.
I think that there may be setting out according to physique.
A dimple mesh is the design felt refreshed in the modern image.
Since it wavered in facing selection, I want the photograph of a cloth sample to put on HP what has higher resolution.
In the direction which is not pleased with the touch slid down with a guide peg before the uneasier one and a normal seat, it is recommended.
There was no negative element to me.View Detail
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING