I bought this "spacer" to raise the seating height my Shoie GT AIR. I would have view issues when I would ride at high speed or leaning into the corners. By raising the way the helmet sits on my head, I could see more. It worked well.Then I bought the new Shoie NeoTecII and JCruise. Strangely enough, I believe that Shoie changed the sizing on their helmets as both helmets fit fine in the cheekpads, but loose around the cranium. I took my ROUGH&ROAD Helmet Spacer and installed it in my J Cruise and the helmet now fits fine. I might have to buy XL helmets in the future, but right now, I'm sweet thanks to this product.View Detail

SHOEI's Off-Road Helmet "VFX-W" I used this product for M Size.

When I was continuously running long in the off-road, I noticed that Helmet's interior paddle was getting wet with sweat, and gradually the Helmet's Front was slipping downwards.

But, S Size feels that it's too small, and you can try replacing it with a new gold quota - - -

So the off-road companion taught us this product.
If it is this price, even if I fail, I feel like giving up, so I bought it!

There are things of 6 mm thickness and 10 mm Thick, but purchasing 10 mm Thick by Cut with Scissors and easy adjustment.

First I removed Helmet's interior pad and tried applying this item.
There are six legs radially extending and there are particularly long legs by 1 pc. It seems to be basic usage to set this to come to Helmet's Rear. I also did so.

Try fitting all interior Pad of Helmet back.

Because I did not cut one place, I wonder whether it will be too tight - - I thought, but I was happy to have a good feeling with a single shot.

Then disassemble again, peel off the Tape of this product and pasted it. Six legs stuck to the periphery so it was hard to paste slightly, but in the end it could be pasted without problems.

After that, she suffered 100 consecutive minutes at Enduro race, but Helmet did not go down as usual.
Also, though I thought that I had a headache when I had a hard time with Size, fortunately I was durable with Large.

Very cheap, I was able to easily make Helmet to Exitly Fit myself ♪
I appreciate my friends who taught me.

Recommendation!View Detail

Purchase Helmet's Size fine adjustment.
You can fine-tune Size if you get a little Large.

The price is reasonable and texture is satisfactory.
There are also two types of thickness Please purchase according to the application.View Detail

There is a groove in the inner parietal part of SZ - RAM 4 so that air can pass, but as long as I am wearing short hair, my hair does not go to sleep there "Petit Mohawk" Become.

By attaching this, it will not become a Mohawk.

It would be nice to wear Inner Cap, but it became troublesome and found this product where I was looking for a substitute Mohawk countermeasure article.

Although it has nothing to do with the original use, people with similar troubles can try.View Detail

The width of my helmet was just good size.
However, sometimes I felt pain in my ears by being compressed because the depth of my helmet became a little bit deep.

I was released from the pain and pressure of my ears after attaching this spacer.

Thanks to this strange shape, it was easy to attach to the curved parts.
I attached it not to close the air intake by cutting the sponge.

It is a very recommended product.View Detail

Purchased for regular replacement.
If it were a little cheaper, I could get a stable replacement...View Detail

?attachment
The CBR650R is mounted at the same position angle as the NORMAL.
However, when the handlebar was cut to the Left lock, it interfered with the interior cover next to the Meter, so the interior cover was cut away.
I also purchased a 45° angled banjo adapter for the mesh hose to accommodate the tension of the mesh hose.
・NORMAL (Reserve integrated horizontal master) Impressions of
No complaints on public roads. Familiar feel and very easy to handle.
However, when the brake is set to "hard brake," the rate of increase in braking force relative to the input seems to decrease, and the brake becomes more forceful.
Radipon (Reserve separate body portrait master) Impressions of
It was totally different from what I expected, my expectation was that it would feel like a Rear brake…
It is really a mild and easy-to-handle radipon.
On public roads, it feels like NORMAL! I wonder if it's because NORMAL is the same NISSIN?
But I felt the radipon effect from Breaking a little stronger, and
It can be hung up to a hard brake without effort.
I felt trust that this could stop.View Detail

I purchased this for use with multiple Helmets. 。
Mount included with the BOLD.
Microphone and speaker are not included and must be purchased separately.View Detail

Grip that had been used for a long time was worn out and had to be replaced.
They are soft and dampen vibration.View Detail

[How is it used?
Used to lick Screw loose.

Was the one you received as per Image?
As per Image.

How was your experience with it?
When used on a strongly tightened Screw, it can be safely and securely removed.
The licked Screw was removed.

It is also useful for DIY Screw removal.

[Points to note]
When used on a licked Screw, it is best to beat it in with a Hammer before use.View Detail