Purchased to replace CUB PRESS
The seals were replaced once before the replacement.
Wiring is absolutely necessary, so some knowledge and skill is required, so if you are not confident, leave it to Shop!
not straight forward
* The BEST and MUST store to find Japanese parts.
* Register now for amazing deals and other special offers!
* Over 800,000 listed items. It's hard NOT to find your parts.
Congratulations! Your new account has been successfully created! You can now take advantage of member privileges to enhance your online
shopping experience with us. If you have ANY questions about the
operation of this online shop, please email Webike through CONTACT US.
A confirmation has been sent to the provided email address. If you
have not received it within the hour, please contact us.
Purchased to replace CUB PRESS
The seals were replaced once before the replacement.
Wiring is absolutely necessary, so some knowledge and skill is required, so if you are not confident, leave it to Shop!
not straight forward
Fits: HONDA monkey Vehicles with horizontal engines, such as monkeys and kabs
I purchased this as an Engine for Spare.
… It is commonly known as Chinese Engine.
I am concerned about using it in a hanging state, but it is inexpensive, so as Spare.
good point
The price is low.
It can be used normally even if it is loaded as it is.
Think of it as the engine of CUB90.
A bad point
The engine oil in the shipment is of poor quality. Please replace it.
It can also be used in Main.
You can also own it as Spare like I do.View Detail
Fits: HONDA MONKEY 124cc Cub and other vehicles with horizontal engines
LITTLE CUB which had Engine Displacement VolumeUp to 108? I purchased Bullet TerminalKit, but I had a little trouble because the wiring color of Instruction Manual was slightly different. The carburetor uses KEIHINPC24φ which was originally used. MJ is #100, SJ is #35, Air Screw 1 turn back. I finished the break-in of 300km with the Chinese Plug and ran 45km now. The amount of OIL is less than 1L. According to the explanation, Gasoline is Regular, 7.75ps/7500rpm, and it drops about 1ps from CT110 HUNTER CUB8.8ps/7000rpm of the same Engine Displacement Volume. There is no instruction manual, just a seal on the surface of the engine that says "run under 50?/h for the first 300km" in English version.
The Idling stabilized after the break-in period, and it starts with a single chalk even on cold mornings, and the low-speed torque is strong and stubborn enough to withstand TRIAL play. I have run up to 80?/h on level ground, but I think there is still room for more. This engine does not have an internal oil filter, so it would be better to change the oil every 1000 miles. I don't know about the durability of this engine as it is only 450 miles old. The clutch feels a little heavy, but if you change to a hydraulic lever, you should have no problem. Chinese products seem to be hit or miss, but this engine may have been a hit when it comes to initial performance.View Detail
Fits: HONDA MONKEY Vehicles with a horizontal engine, HONDA CUB Vehicles with a horizontal engine
I bought it after hearing about it from a Chinese EngineOwner I met while touring I have driven 400km now and I am satisfied with the performance
There is no particular Trouble
When mounting on AB-27MONKEY, the Swing Arm side mount width is set to Normal Since it was wider than the engine, it shaved with File about 1mm
And because the head of the Bolt in the photo protrudes from Mount and interferes, the Honda OEMBolt I replaced it with
Carburetor is PC20 and Exhaust System is Takagawa's Exhaust System Up Type and Wiring is OEM Changed to the same type of Connector, Coupler connection to NORMALWiring, CDI It is also NORMAL, but the low-speed torque also turns smoothly to high rpm without complaint It is a characteristic that is easy to ride The fuel consumption is 50km/l if the speed is less than the legal speed, but if you use a lot of high revolutions, the fuel consumption is less than 40km/l The Oil uses Honda OEM G1 10W-30
I was prepared for it, but it's not going to be a pimped-out version, so it's a processing premise and a cosmetic purchase RecommendationView Detail
Fits: HONDA MONKEY Vehicles with a horizontal engine, HONDA CUB Vehicles with a horizontal engine
Used for SUPER CUBAA 01
I bought it because I wanted to try HandClutch
Used for about 500 km conveniently on the way, farm road, riverbed Main
Because it runs on the snow road or fuel efficiency is very bad
It will only be about 25 km of litter
However, Engine from the bottom tenaciously easy to use Engine
Although it may be Engine per hit
I felt it was not enough to say in the street
Mission is well entered and Neutral is easy to go out
Plugetc. It was transformed into domestic products and the Piston ring was also firmly attached
It was not satisfactory to add carburetor, but it was supposed to be able to run without excess or deficiency
If you want greedy carburetor change or intake mania change ...
No, since it is also good to add, it is somewhat savvy for amateurs because there is less time and effort to find that they are able to purchase conforming items togetherView Detail
Purchased for regular replacement.
If it were a little cheaper, I could get a stable replacement...View Detail
?attachment
The CBR650R is mounted at the same position angle as the NORMAL.
However, when the handlebar was cut to the Left lock, it interfered with the interior cover next to the Meter, so the interior cover was cut away.
I also purchased a 45° angled banjo adapter for the mesh hose to accommodate the tension of the mesh hose.
・NORMAL (Reserve integrated horizontal master) Impressions of
No complaints on public roads. Familiar feel and very easy to handle.
However, when the brake is set to "hard brake," the rate of increase in braking force relative to the input seems to decrease, and the brake becomes more forceful.
Radipon (Reserve separate body portrait master) Impressions of
It was totally different from what I expected, my expectation was that it would feel like a Rear brake…
It is really a mild and easy-to-handle radipon.
On public roads, it feels like NORMAL! I wonder if it's because NORMAL is the same NISSIN?
But I felt the radipon effect from Breaking a little stronger, and
It can be hung up to a hard brake without effort.
I felt trust that this could stop.View Detail
I purchased this for use with multiple Helmets. 。
Mount included with the BOLD.
Microphone and speaker are not included and must be purchased separately.View Detail
Grip that had been used for a long time was worn out and had to be replaced.
They are soft and dampen vibration.View Detail
[How is it used?
Used to lick Screw loose.
Was the one you received as per Image?
As per Image.
How was your experience with it?
When used on a strongly tightened Screw, it can be safely and securely removed.
The licked Screw was removed.
It is also useful for DIY Screw removal.
[Points to note]
When used on a licked Screw, it is best to beat it in with a Hammer before use.View Detail
To continue viewing this product on Japan domestic webike (in Japanese), press "Go to Japan Domestic".
Customer Service
INFORMATION
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING