?
* The BEST and MUST store to find Japanese parts.
* Register now for amazing deals and other special offers!
* Over 800,000 listed items. It's hard NOT to find your parts.
Congratulations! Your new account has been successfully created! You can now take advantage of member privileges to enhance your online
shopping experience with us. If you have ANY questions about the
operation of this online shop, please email Webike through CONTACT US.
A confirmation has been sent to the provided email address. If you
have not received it within the hour, please contact us.
Fits: KAWASAKI ESTRELLA 99 BJ250 [Frame No.]BJ250A-041001 or later, KAWASAKI ESTRELLA 97 bj250 [frame no.]bj250a-030001 or later, KAWASAKI ESTRELLA 98 BJ250 [Frame No.]BJ250A-035001 to 041000, KAWASAKI ESTRELLA 95 BJ250 [Frame No.]BJ250A-014001 to 030000, KAWASAKI ESTRELLA 94 BJ250 [Frame No.]BJ250A-008001 to 014000 View more
Be sure to work with the Center Stand in an upright position.
Also, as mentioned in the Instruction Manual, the Nut will rotate.
ESTRELLA 2007 is 14mm inside and 12mm outside. Wrench was used
Fits: KAWASAKI ESTRELLA 99 BJ250 [Frame No.]BJ250A-041001 or later, KAWASAKI ESTRELLA 97 bj250 [frame no.]bj250a-030001 or later, KAWASAKI ESTRELLA 98 BJ250 [Frame No.]BJ250A-035001 to 041000, KAWASAKI ESTRELLA 95 BJ250 [Frame No.]BJ250A-014001 to 030000, KAWASAKI ESTRELLA 94 BJ250 [Frame No.]BJ250A-008001 to 014000
I installed it in my wife Motorcycle,
Even women who are unfamiliar can be installed for as long as an hour.
I am in combination with Tegner's Back,
I think that it is good for prevention of involvement due to the clearance with Suspension.View Detail
Fits: KAWASAKI ESTRELLA 99 BJ250 [Frame No.]BJ250A-041001 or later, KAWASAKI ESTRELLA 97 bj250 [frame no.]bj250a-030001 or later, KAWASAKI ESTRELLA 98 BJ250 [Frame No.]BJ250A-035001 to 041000, KAWASAKI ESTRELLA 95 BJ250 [Frame No.]BJ250A-014001 to 030000, KAWASAKI ESTRELLA 94 BJ250 [Frame No.]BJ250A-008001 to 014000
I attached it to ESTRELLA's Right Side.
Since I also have Left SideBracket made by KIJIMA I tried to compare it in reverse, but DAYTONA made it longer in length and can hold Bag firmly!
I was wearing DEGNERNB - 1 made by KIJIMA, but the height was insufficient and the lower part of Bag touched and broken the Rear suspension, but this DAYTONA made few worries.
Another characteristic feature is the mounting hole for Bag fixing cord. KIJIMA made it easy to move with slippers even when tied up, but this is saved because it will not be shifted if it passes through a hole.
Both goodness of making does not change, I feel that it is very solid. Plating quality is also good.
Because it is practical importance Items, I feel like I should not ask for the goodness of Single Body, but the bone-braid is amazing. If it is about 2 - 3 mm thick already, it looks nice even without Bag, but if you look at it entirely, a casual feeling stands out.
It was transmitted to both rabbits and corners that it is a product made by thinking about the side of use well. I think that it is worth only the price. Recommendation!
(Although a polite Instruction Manual dedicated to model cars comes with Bolt, M10 before / Both M12 and Torque have misstatements later than M8. Those who purchase the service manual at hand. )View Detail
Fits: HONDA Rebel250 17-23 S Edition MC49, HONDA Rebel250 17-23 Including ABS MC49, HONDA Rebel500 17-23 PC60
Excellent Service, Fast Shipping and very good packing, customer service is great. I recommend this company to all. Thanks View Detail
+1Fits: HONDA GB350C 24 8BL-NC64
The Daytona saddlebag support kit includes a 38mm extension pipe and 55mm bolts. It is possible to install it with these parts, but the back of the support will be loose when viewed from above. However, if you use this part, it is composed of a 30mm extension pipe and 50mm bolts, so it can be installed more appropriately for the GB350C.View Detail
Fits: HONDA GB350C 24 8BL-NC64
I previously installed the left saddlebag support part, and this time I completed the installation of the right saddlebag support. Installation requires only the removal of two hex bolts. The first time you loosen the bolts, you may need to use a lever such as a ratchet to loosen them.The parts marked with a V in the first picture are the kit for mounting the saddlebag support. They are basically included in this product, so no additional purchase is required. I bought them separately, so they are now extra parts that I don't need right now.I am very satisfied with the material, paint condition, and welding condition of this product. I highly recommend it.View Detail
Fits: HONDA GB350C 24 8BL-NC64
いつもデイトナの製品を愛しています。 ホンダのgb350cの最初のチューニング製品としてデイトナ製品を選んだのは本当に良かったです。 これのおかげで反対側のラックも買うことができました。 他のレビューにも書きましたが、ホンダgb350cのためにもっと多くの製品が作られるといいですねView Detail
Fits: HONDA GB350C 24 8BL-NC64
very good to fit with honda gb350c. daytona always never dissapoints any product. Im always expect new products for honda gb350c. we dont have enough accessarys for honda gb350cView Detail
Purchased for regular replacement.
If it were a little cheaper, I could get a stable replacement...View Detail
?attachment
The CBR650R is mounted at the same position angle as the NORMAL.
However, when the handlebar was cut to the Left lock, it interfered with the interior cover next to the Meter, so the interior cover was cut away.
I also purchased a 45° angled banjo adapter for the mesh hose to accommodate the tension of the mesh hose.
・NORMAL (Reserve integrated horizontal master) Impressions of
No complaints on public roads. Familiar feel and very easy to handle.
However, when the brake is set to "hard brake," the rate of increase in braking force relative to the input seems to decrease, and the brake becomes more forceful.
Radipon (Reserve separate body portrait master) Impressions of
It was totally different from what I expected, my expectation was that it would feel like a Rear brake…
It is really a mild and easy-to-handle radipon.
On public roads, it feels like NORMAL! I wonder if it's because NORMAL is the same NISSIN?
But I felt the radipon effect from Breaking a little stronger, and
It can be hung up to a hard brake without effort.
I felt trust that this could stop.View Detail
I purchased this for use with multiple Helmets. 。
Mount included with the BOLD.
Microphone and speaker are not included and must be purchased separately.View Detail
Grip that had been used for a long time was worn out and had to be replaced.
They are soft and dampen vibration.View Detail
[How is it used?
Used to lick Screw loose.
Was the one you received as per Image?
As per Image.
How was your experience with it?
When used on a strongly tightened Screw, it can be safely and securely removed.
The licked Screw was removed.
It is also useful for DIY Screw removal.
[Points to note]
When used on a licked Screw, it is best to beat it in with a Hammer before use.View Detail
To continue viewing this product on Japan domestic webike (in Japanese), press "Go to Japan Domestic".
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING