Yamaha Derexa 1100 Oil Cap O-ringI bought the item with a replacement voucher.It is an OEM, and we received and replaced the product with meticulous packaging for fast deliveryI will buy good items next time.View Detail

About quality and texture - The intake insulator O-Rings from K-Pit are made from soft rubber, the quality from the overall fit and finish is perfect.About the feeling of use - Perfectly shaped O-Rings that were necessary for me to purchase when piecing together parts for my engine maintenance as the original O-Rings were leaking on the 2 valve cylinder head.Products to buy together - A key product to purchase when performing maintenance on the engine is new O-Rings for the cylinder head tappet covers as they tend to also leak over time.Difficulty of installation - The installation of the intake insulator O-Rings are a simple task that took 0.5 of an hour to complete. Some mechanical aptitude and the use of basic hand tools is required to secure the O-Rings directly onto the insulator that lies between the cylinder head and throttle body.Cost performance and comparison with other products - I find the cost of all the products K-Pit to great value when compared to what most other companies sell their products for and the intake insulator O-Rings are no different.About shipping and packaging - With there being no cost difference between sea freight and EMS for the intake insulator O-Rings, I chose EMS for an earlier arrive date. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box.Any concerns, cautions, or advice when purchasing - Webike Japan is the first place I look to for all my motorcycle needs. From service parts to performance products and even motorcycle gear and apparel, Webike always seem to satisfy my needs in regards to availability and pricing.View Detail

포장을 꼼꼼히 잘해서 왔으며 배송도 빠르게 잘받았습니다 설치하고 마음에 들어요 야마하 XVS 1100 02년 식에 잘 맞아요설치 이쁘게 하고 안전하게 잘사용 하겠습니다 다음에도 필요한 물건 있으면 또 구매하겠습니다수고하셨습니다.View Detail

About quality and texture - The cylinder head tappet cover O-Rings from K-Pit are made from soft rubber, the quality from the overall fit and finish is perfect.About the feeling of use - Perfectly shaped O-Rings that where necessary for me to purchase when piecing together parts for my engine maintenance as the original O-Rings were leaking on the 2 valve cylinder head.Products to buy together - A key product to purchase when performing maintenance on the engine is new O-Rings for the timing and crank covers as they tend to also leak over time.Difficulty of installation - The installation of the cylinder head tappet cover O-Ring is an simple task that took 0.2 of an hour to complete. Common sense is all that is required to secure the O-Ring to the cylinder head tappet covers.Cost performance and comparison with other products - I find the cost of all the products K-Pit to great value when compared to what most other companies sell their products for and the cylinder head tappet cover O-Rings are no different.About shipping and packaging - With there being no cost difference between sea freight and EMS for the cylinder head tappet cover O-Rings, I chose EMS for an earlier arrive date. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box.Any concerns, cautions, or advice when purchasing - Webike Japan is the first place I look to for all my motorcycle needs. From service parts to performance products and even motorcycle gear and apparel, Webike always seem to satisfy my needs in regards to availability and pricing.View Detail

About quality and texture: I am happy with the quality of the tappet cover O-Rings from K-Pit, made from a soft flexible rubber to help create a good seal. About the feeling of use: After removing and installing the tappet cover numbers times for engine upgrades and maintenance the OEM Honda O-Rings no longer completely sealed and had a minor oil leak, the K-Pit O-Ring with their preformed shape fitted perfectly with zero leaks. Products to buy together: The timing and crankshaft hole cap O-Rings from K-Pit would also be desirable to purchase alongside the tappet cover O-Rings. Difficulty of installation: The process to install takes about 15 minutes, remove the tappet covers and use an O-Ring removal tool so not to damage the surface where the O-Ring seats. Apply a little engine oil and install the O-Rings evenly and untwisted before tightening down the covers. Run the engine and make sure no leaks are present. Not difficult to do. Cost performance and comparison with other products: Good costing as you are getting a quality part from K-Pit that was in stock and ready to ship unlike the Honda O-Rings but the K-Pit O-Rings is slightly more expensive. About shipping and packaging: Sea frieght was my preferred method of shipping due to the lower cost but currently this service is unavailable from Japan Post, EMS is much faster which is nice. Webike kept me updated on the status of my order up to when it shipped. The parcel arrived within the expected date range and was well packaged with no chance of the part being damaged. Any concerns, cautions, or advice when purchasing: View the Kitaco engine tuning and maintenance parts catalog to see what other maintenance parts K-Pit have to fit the Grom and the Monkey 125.View Detail

Purchased for regular replacement.
If it were a little cheaper, I could get a stable replacement...View Detail

?attachment
The CBR650R is mounted at the same position angle as the NORMAL.
However, when the handlebar was cut to the Left lock, it interfered with the interior cover next to the Meter, so the interior cover was cut away.
I also purchased a 45° angled banjo adapter for the mesh hose to accommodate the tension of the mesh hose.
・NORMAL (Reserve integrated horizontal master) Impressions of
No complaints on public roads. Familiar feel and very easy to handle.
However, when the brake is set to "hard brake," the rate of increase in braking force relative to the input seems to decrease, and the brake becomes more forceful.
Radipon (Reserve separate body portrait master) Impressions of
It was totally different from what I expected, my expectation was that it would feel like a Rear brake…
It is really a mild and easy-to-handle radipon.
On public roads, it feels like NORMAL! I wonder if it's because NORMAL is the same NISSIN?
But I felt the radipon effect from Breaking a little stronger, and
It can be hung up to a hard brake without effort.
I felt trust that this could stop.View Detail

I purchased this for use with multiple Helmets. 。
Mount included with the BOLD.
Microphone and speaker are not included and must be purchased separately.View Detail

Grip that had been used for a long time was worn out and had to be replaced.
They are soft and dampen vibration.View Detail

[How is it used?
Used to lick Screw loose.

Was the one you received as per Image?
As per Image.

How was your experience with it?
When used on a strongly tightened Screw, it can be safely and securely removed.
The licked Screw was removed.

It is also useful for DIY Screw removal.

[Points to note]
When used on a licked Screw, it is best to beat it in with a Hammer before use.View Detail