I find this specification spark plug perfectly suited to my stock Honda Monkey 125 engine

About quality and texture, I can confirm that the quality is great and that the materials used are a combinations of ruthenium, porcelain and nickel alloy for the Moto DX plug from NGK. About the feeling of use, After 8000 kms of use with the previous standard spark plug the throttle response was lacking but after the installation of the new Moto DX spark plug all my performance was restored. Products to buy together, To maximize the performance of your spark it would be ideal also add an upgraded ignition coil from Kitaco to your cart. Difficulty of installation, I can say the fitment of the Moto DX spark plug for my installation was very easy due to the ease of access to the cylinder head and simple nature of the task. Cost performance and comparison with other products, The pricing of the product is great. You receive the highest quality spark plug available for the Grom from well known brand. Pricing of stand spark plugs is lower where Moto DX spark plugs are much more expensive. About shipping and packaging, My order was shipped within 48 hours of me placing the order and I received a few emails advising me of the status up until the order was dispatched. I find the link supplied to track my order very useful and the order arrived within the estimated date range. Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs.View Detail

I had been using a Moto DX spark plug, but decided to purchase an iridium plug to try it out.After upgrading the ignition system components such as the stock ignition coil and spark plug cable, I came across information suggesting that an iridium plug can be slightly more efficient than a DX plug in this kind of setup, which is why I decided to make the switch.Since the current DX plug was replaced not too long ago, I’m planning to install the iridium plug this coming spring. View Detail

루테늄 점화플러그로 점화성능이나 연비에 도움이 될 것으로 판단되어 구매했습니다.
현재 시판중인 제품 중 슈퍼커브에 적용할 수 있는 최고의 제품이 아닐까 생각됩니다. 순정 점화플러그 대비하여 수명도 길고 점화성능도 좋아 시동성에도 도움이 됩니다. 추천합니다.----------------------------------------------------------I purchased these ruthenium spark plugs because I thought they would improve ignition performance and fuel economy.I believe they are the best product currently available for the Super Cub. Compared to stock spark plugs, they offer longer life and improved ignition performance, which also contributes to easier starting. I highly recommend them.Powered by Google TranslatorView Detail

Got it shipped fast, thanks to webike. Lovely spark plugs, safe packaging; no-hassle delivery. Will order again for sure!View Detail

Good igention for high performance engine Easy install Well made Good packagingArrived on timeI would definitely order again from webike Japan Good seller View Detail

About quality and texture - The high level stainless steel oval exhaust system from Tyga Performance is made from stainless steel with a buffed finish and carbon fibre with a clear gloss coating, the quality from the overall fit and finish is perfect.About the feeling of use - The high level stainless steel oval exhaust system offers small performance gains and high enjoyment gains as the appearance sure does not disappoint but the exhaust sound is the high light for me.Products to buy together - The Honda Monkey 125 has no carbon fibre parts fitted from the factory, so the purchasing of other high quality parts like this high level stainless steel oval exhaust system from Tyga Performance would be perfect. More carbon fibre to replace the factory chrome plated parts is what I would recommend.Difficulty of installation - The installation of the high level stainless steel oval exhaust system is a simple task that took 1 hour to complete. Some mechanical aptitude and the use of basic hand tools is what is required to secure the high level stainless steel oval exhaust system to the engine and frame.Cost performance and comparison with other products - I find the cost of all the products Tyga Performance sell to be higher then what most other companies sell their products for but with the high level stainless steel oval exhaust system this is not the case as their product is much better value this time round.About shipping and packaging - With there being a significant cost difference between sea freight and EMS for the high level stainless steel oval exhaust system, I chose sea freight so I could put the saved money toward additional parts. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box.Any concerns, cautions, or advice when purchasing - Webike Japan is the first place I look to for all my motorcycle needs. From service parts to performance products and even motorcycle gear and apparel, Webike always seem to satisfy my needs in regards to availability and pricing.View Detail

About quality and texture - The size medium sticker from SP Takegawa is made using polyvinyl chloride sheet with a polypropylene film, the quality from the overall fit and finish is perfect.About the feeling of use - What to buy when you have everything SP Takegawa on your motorcyle and now need to display your passion, but I find the size of this sticker big with limited positions available on my minimotos.Products to buy together - If you are looking to add as much SP Takegawa detail as possible to your life then one key product to purchase to accomplish this would be a SP Takegawa 50th anniversary T-shirt.Difficulty of installation - The installation of the size medium sticker is an simple task that took 0.1 of an hour to complete. Common sense is all that is required to secure the sticker to an area of the appropriate size. Motorcycle swingarm, fork legs, car window, toolbox or beer fridge in the garage, the options are endless. Cost performance and comparison with other products - I find the cost of all the products SP Takegawa sell to be on par when compared to what most other companies sell their products for and the size medium sticker no different.About shipping and packaging - With there being no cost difference between sea freight and EMS for the size medium sticker, I chose EMS for an earlier arrive date. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box.Any concerns, cautions, or advice when purchasing - Webike Japan is the first place I look to for all my motorcycle needs. From service parts to performance products and even motorcycle gear and apparel, Webike always seem to satisfy my needs in regards to availability and pricing.View Detail

About quality and texture - The hose clamp from Kitaco is made from billet aluminum with detailed machining and a black anodized surface finish, the quality from the overall fit and finish is perfect.About the feeling of use - This hose clamp does an awesome job increasing the appeal on the Grom by allowing the removal of the original plastic zip tie like hose clamp used on the handlebars to secure the electrical harness. Products to buy together - A key product to purchase when looking to further increase the appeal on the Grom would be a billet aluminium starter motor cover to dress up the original cheap looking piece.Difficulty of installation - The installation of the hose clamp is a simple task that took 0.2 of an hour complete. Common sense is all that is required to secure the hose clamp around the electrical harness and onto the handlebars.Cost performance and comparison with other products - I find the cost of all the products Kitaco sell to great value when compared to what most other companies sell their products for and the hose clamp is no different.About shipping and packaging - With there being no cost difference between sea freight and EMS for the hose clamp, I chose EMS for an earlier arrive date. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box.Any concerns, cautions, or advice when purchasing - Webike Japan is the first place I look to for all my motorcycle needs. From service parts to performance products and even motorcycle gear and apparel, Webike always seem to satisfy my needs in regards to availability and pricing. View Detail

About quality and texture - The track racer seat from G-Craft is made using a fibreglass seat base, synthetic perforated tuck 'n roll material for the seat cover top and faux suede for the seat cover sides, the quality from the overall fit and finish is perfect.About the feeling of use - I was excited when I saw that G-Craft had released this flat shaped seat with it's track racer inspired look and had to have it. Suitably comfortable in regards to it's shape and foam used. Still not as comfortable as the original Honda seat, but the custom look the seat offers the Monkey 125 is awesome.Products to buy together - A key product to purchase for that unique custom build is the taillight kit from Hurricane that removes the entire rear fender. Another product that is tiny and further minimizes the Monkey 125.Difficulty of installation - The installation of the track racer seat is a simple task that took 0.5 of an hour to complete. Some slight mechanical aptitude and the use of basic hand tools is all that is required to secure thetrack racer seat to the frame rails.Cost performance and comparison with other products - I find the cost of all the products G-Craft sell to be on par when compared to what most other companies sell their products for and track racer seat is no different.About shipping and packaging - This was part of a big order and sea frieght was used to keep the costs down. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box.Any concerns, cautions, or advice when purchasing - Webike Japan is the first place I look to for all my motorcycle needs. From service parts to performance products and even motorcycle gear and apparel, Webike always seem to satisfy my needs in regards to availability and pricing.View Detail

About quality and texture - The P4 right brake caliper from Brembo is made from cast aluminium with a black anodized surface finish and includes brake pads, the quality from the overall fit and finish is perfect.About the feeling of use - The P4 right brake caliper is initially overwhelming to look at on the minimoto with it's massive physical appearance but soon becomes part of the Monkey 125 with it's black finish that matches the original styling, not to mention the improved feel and braking performance with it's larger diameter pistons and higher quality brake pads.Products to buy together - The Honda Monkey 125 is an inexpensive motorcycle with a lot of low quality parts from the factory, so the purchasing of other high quality parts like this P4 right brake caliper from Brembo would be perfect but the essential product to purchase to complete the installation is a front brake support bracket to allow for the meshing together of the Brembo brake caliper and the Honda lower fork leg.Difficulty of installation - The installation of the P4 right brake caliper is a intermediate task that took 0.7 of an hour to complete. Some mechanical aptitude and the use of basic hand tools is what is required to secure the P4 right brake caliper to the bracket and bleed the brake caliper.Cost performance and comparison with other products - I find the cost of all the products Brembo sell to be higher then what most other companies sell their products for and the P4 right brake caliper is no different, but this is due to the high quality materials used and the consistent high quality finish of their products.About shipping and packaging - With there being no significant cost difference between sea freight and EMS for the P4 right brake caliper, I chose EMS for an earlier arrival dates. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box.Any concerns, cautions, or advice when purchasing - Webike Japan is the first place I look to for all my motorcycle needs. From service parts to performance products and even motorcycle gear and apparel, Webike always seem to satisfy my needs in regards to availability and pricing.View Detail