Perfect solution to allow the use of a stand with hooks

About quality and texture:G-Craft’s usual high machining quality is present here. CNC aluminum parts are lightweight, well-finished, and anodized for durability. The etched logo adds a clean custom touch.About the feeling of use:Provides a reliable hook point for a rear stand. Lifts the bike securely with no flex or misalignment. Also adds a stylish element to the rear suspension area.Products to buy together:Rear paddock stand with hook adapter is what's needed to make the most of these suspension hooks. Also front stand hooks that secure to the lower fork legs will allow for the front of the bike to be lifted too.Difficulty of installation:Very easy. Just remove the shock nuts, install the hook in it's place and torque to spec. Takes less than 15 minutes.Cost performance and comparison with other products:More expensive than basic hooks that secure to a swingarm, but far superior in build, fit, and finish. A premium option for those who value quality and reliability.About shipping and packaging:Well-packaged by Webike. Arrived in perfect condition with all hardware included.Any concerns, cautions, or advice when purchasing:Finish can scratch if you're careless with stand hooks. Make sure to torque bolts properly and check compatibility with your rear stand.Final thoughts:A small but very effective upgrade for frequent maintainers. Looks great, performs well, and adds utility without compromising the bike’s aesthetics.View Detail

About quality and texture - The front stand hooks from G-Craft is made from billet aluminum with detailed machining and an all black anodized surface finish, the quality from the overall fit and finish is perfect.About the feeling of use - I found using my front head stem stand overkill when raising my Monkey125 for detailing. The addition of the front stand hooks were the perfect solution to allow the use of a stand with hooks for a extremely stable working platform.Products to buy together - The product to purchase together with the front stand hooks would be a grab bar which is super useful when maneuvering the Monkey 125 around the garage for maintenance and storage.Difficulty of installation - The installation of the front stand hooks is a simple task that took 0.5 of an hour to complete. Common sense and the use of basic hand tools is what is required to secure the hooks to the lower front legs.Cost performance and comparison with other products - I find the cost of all the products G-Craft sell to be on par when compared to what most other companies sell their products but these front stand hooks are priced higher.About shipping and packaging - With there being no cost difference between sea freight and EMS for front stand hooks, I chose EMS for an earlier arrival date. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box.Any concerns, cautions, or advice when purchasing - Webike Japan is the first place I look to for all my motorcycle needs. From service parts to performance products and even motorcycle gear and apparel, Webike always seem to satisfy my needs in regards to availability and pricing.View Detail

About quality and texture - The suspension spool from G-Craft is made from billet aluminum with detailed machining and a mix of silver and black anodized surface finishes, the quality from the overall fit and finish is perfect.About the feeling of use - I found using my rear stand with the platform fiitings a little uneasy due to the constant shifting. The addition of the suspension spools was the perfect solution to allow the use of my rear stand with hooks for a extremely stable working platform.Products to buy together - The product to purchase together with the suspemsion spools would be a grab bar which is super useful when maneuvering the Monkey 125 around the garage for maintenance and storage.Difficulty of installation - The installation of the suspension spools is a simple task that took 0.4 of an hour to complete. Common sense and the use of basic hand tools is what is required to secure the spools to the lower rear suspension mounting points.Cost performance and comparison with other products - I find the cost of all the products G-Craft sell to be on par when compared to what most other companies sell their products but these suspension spools are higher.About shipping and packaging - With there being no cost difference between sea freight and EMS for the suspension spools, I chose EMS for an earlier arrival date. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box.Any concerns, cautions, or advice when purchasing - Webike Japan is the first place I look to for all my motorcycle needs. From service parts to performance products and even motorcycle gear and apparel, Webike always seem to satisfy my needs in regards to availability and pricing.View Detail

About quality and texture, I can confirm that the quality is great and that the material used is aluminum that is CNC machined to shape and finished with a orange anodized coating. About the feeling of use, I am happy with the addition of these swingarm covers with stand hooks to ad in easier maintenance on the drive chain and help protect the Grom while also adding some some style when compared to the original parts. Products to buy together, H2C have a full range of products specifically for the Grom and the front wheel ends would be ideal to also add to your cart to help add some protection to the front wheel. Difficulty of installation, I can say the fitment of the swingarm covers with stand hooks for my installation was average due to the rear end requiring to be lifted and supported to allow for removal of the rear axle before fitting. Cost performance and comparison with other products, The pricing of the product is great. You receive a simple yet effective designed part to ad in supporting and protecting your Grom. There are higher priced option available that incorporate a new chain adjustment but I find the H2C option to be great for the price they costs. About shipping and packaging, My order was shipped within 48 hours of me placing the order and I received a few emails advising me of the status up until the order was dispatched. I find the link supplied to track my order very useful and the order arrived within the estimated date range. Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs.View Detail

About quality and texture, I can confirm that the quality is great and that the material used is aluminum that is CNC machined to shape and finished with a black and silver anodized coating. About the feeling of use, The suspension spools are light weight and of a strong construction but the contact surface does mark up when used with steel pick up hooks. A must have addition for the Monkey 125 if you do your own maintenance. Products to buy together, Other highly detailed parts from G-Craft to help improve rider experience like the spindle holder would be ideal to add to your cart. Difficulty of installation, I can say the fitment of the suspension spools for my installation was very easy due to the ease of access and simple nature of securing the spool ends with a spanner. Cost performance and comparison with other products, The pricing of the product is great. You receive a well designed part made from a high quality material with a matching finish. There is a cheaper option available but these are worth the extra money. About shipping and packaging, My order was shipped within 24 hours of the product being in stock and I received a few emails advising me of the status up until the order was dispatched. The order arrived within the estimated date range and was extremely well packaged. I found the link supplied to track my order very useful while I was waiting for the order to land in the country. Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs.View Detail

About quality and texture - The left side cover from Over Racing is made from aluminium with a red and black anodized surface finish and the quality from the overall fit and finish is perfect. About the feeling of use - An interesting looking slim cover but I think design can be further improved by mainly closing the gap between the coverl and frame when looking down from the top, but I have to say that the red anodized finish on the cover matches the red paint on my 2018 frame really well. Products to buy together - A key product to purchase would have to be the matching right side cover, which further increase the appeal of the Monkey 125 when you need to fill the voild left from removing the original high mount exhaust. Difficulty of installation - The installation of the left side cover is a simple task that will only take 0.2 hour to complete. The use of basic hand tools is all that will be required to assemble the cover and then push it into place on the frame with the included lugs.Cost performance and comparison with other products - I find the cost of all the products Over Racing sell to be on high when compared to what most other companies sell their products for and this is no different with the left side cover. About shipping and packaging - This was part of a bigger order and sea frieght was used to keep the costs down. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box.Any concerns, cautions, or advice when purchasing - Webike Japan is the first place I look to for all my motorcycle needs. From service parts to performance products and even motorcycle gear and apparel, Webike always seem to satisfy my needs in regards to availability and pricing. View Detail

About quality and texture - The oval up full exhaust from Over Racing is made from stainless steel with a high polished finish, the quality from the overall fit and finish is perfect. About the feeling of use - The oval up stainless steel exhaust system has everything going for it, with improved performance, increased appeal but the deep exhaust sound is the highlight for me. Products to buy together - A key product to purchase with the oval up full exhaust would be an open air intake to vastly increase the appeal by simply removing the original airbox. Difficulty of installation - The installation of the oval up full exhaust is a simple task that took 1 hour to complete. Some mechanical aptitude and the use of basic hand tools is what is required to muffler to the frame and the exhaust pipe to the engine. Cost performance and comparison with other products - I find the cost of all the products Over Racing sell to be on higher price when compared to what most other companies sell their products for and the I find the oval up full exhaust is no different. About shipping and packaging - With there being a significant cost difference between sea freight and EMS for the oval up full exhaust , I chose sea freight so I could put the saved money toward additional parts. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box. Any concerns, cautions, or advice when purchasing - Webike Japan is the first place I look to for all my motorcycle needs. From service parts to performance products and even motorcycle gear and apparel, Webike always seem to satisfy my needs in regards to availability and pricing.View Detail

About quality and texture - The grab bar from SP Takegawa is made from pieces of plate and steel tube with precision bents that are TIG welded together with a chrome surface finish, the quality from the overall fit and finish is perfect.About the feeling of use - The grab bar design perfectly matches the original styling of the Honda Monkey and a grab bar also adds convenience when wanting to maneuver the bike in tight spaces.Products to buy together - The key product to buy together with the grab bar is the fender eliminator from SP Takegawa to complete the look of the rear end by removing the over sized plastic fender.Difficulty of installation - The installation of the grab bar is a simple task that took 0.5 of an hour to complete. Some slight mechanical aptitude and the use of basic hand tools is all that is required to secure the grab bar to the frame.Cost performance and comparison with other products - I find the cost of all the products SP Takegawa sell to be on par when compared to what most other companies sell their products for and the grab bar is no different.About shipping and packaging - This was part of a big order and sea frieght was used to keep the costs down. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box. Any concerns, cautions, or advice when purchasing - For my location, purchasing specialty products like this from Webike Japan is the only option. There are a few local stores selling parts for the Monkey 125 but the range is very limited. View Detail

About quality and texture - The GP performance full exhaust from Over Racing is made from titanium with a titanium drag blue finish, the quality from the overall fit and finish is perfect. About the feeling of use - The GP performance titanium exhaust system has so much going for it, with the improved performance and reduced weight, the highlight for me is the titanium finish itself. Products to buy together - A key product to purchase with the GP performance full exhaust would be an open air intake to continue increasing the appeal by simply removing the original airbox. Difficulty of installation - The installation of the GP performance full exhaust is a simple task that took 1 hour to complete. Some mechanical aptitude and the use of basic hand tools is what is required to secure the muffler to the frame via the included bracket and the exhaust pipe to the engine. Cost performance and comparison with other products - I find the cost of all the products Over Racing sell to be on higher price when compared to what most other companies sell their products for but I find other titanium exhausts for the Monkey to be similar this time. About shipping and packaging - This was part of a big order and sea frieght was used to keep the costs down. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box. Any concerns, cautions, or advice when purchasing - For my location, purchasing Tyga Performance products from Webike Japan is the best option when taking into account the shipping cost but depending on where you live you may be better off purchasing from Webike Thailand due to the much low product pricing.View Detail

About quality and texture - The right side cover from Over Racing is made from aluminium but unfortunately the red anodized surface finish on the panel that was delivered to me was incorrect and does not match the left side cover, making the set unsuitable for installation. Within a week of Webike being notified of the issue, the part is on the way back to Japan and once received a replacement will be resent at no additional cost to me. About the feeling of use - This modern angular and slim designed right side cover will nicely fill the open space left after removing the original high mount exhaust and also will not contact the inside of my leg unlike other bulky aftermarket right side cover would when using my lower profile seat. Products to buy together - A key product to purchase would have to be the matching left side cover, which further increase the appeal of the Monkey 125 by the removal of the less then ideal bulky original plastic part. Difficulty of installation - The installation of the right side cover will be a simple task and I can see it only taking me 0.2 hour to complete. The use of basic hand tools is all that will be required to secure the panel directly to the frame with the included spacer and fasteners.Cost performance and comparison with other products - I find the cost of all the products Over Racing sell to be on high when compared to what most other companies sell their products for but that is not the case this time as similar style right side cover are of the same price. About shipping and packaging - This was part of a bigger order and sea frieght was used to keep the costs down. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box.Any concerns, cautions, or advice when purchasing - Webike Japan is the first place I look to for all my motorcycle needs. From service parts to performance products and even motorcycle gear and apparel, Webike always seem to satisfy my needs in regards to availability and pricing.View Detail