Does wonders improving the look over the factory finished fork guards

About quality and texture - The right side fork guard from Tyga Performance is made from 100% carbon fibre with a clear gloss coating, the quality from the overall fit and finish is perfect.About the feeling of use - The right side fork guard from Tyga Performance is my favorite finished one of the lot, purely a cosmetic addition but for me does wonders improving the look over the factory finished fork guards.Products to buy together - The Honda Monkey 125 has no carbon fibre parts fitted from the factory, so the purchasing of other high quality parts like the right side fork guard from Tyga Performance would be perfect. More carbon fibre to replace the factory plastic moulded parts is what I would recommend.Difficulty of installation - The installation of the right side fork guard is a simple task that took 0.1 of an hour to complete. Some mechanical aptitude and the use of basic hand tools is what is required to mount the right side fork guard to the lower fork leg.Cost performance and comparison with other products - I find the cost of all the products Tyga Performance sell to be higher then what most other companies sell their products for and the right side fork guard is no different, but this is due to the high quality materials used and the consistent high quality finish of their products.About shipping and packaging - With there being no cost difference between sea freight and EMS for the fork guards, I chose EMS for an earlier arrival date. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box.Any concerns, cautions, or advice when purchasing - Webike Japan is the first place I look to for all my motorcycle needs. From service parts to performance products and even motorcycle gear and apparel, Webike always seem to satisfy my needs in regards to availability and pricing.View Detail

About quality and texture - The fork guards from Tyga Performance is made from 100% carbon fibre with a clear gloss coating, the quality from the overall fit and finish is perfect.About the feeling of use - The fork guards are my favourite designed one of the lot, purely a cosmetic addition but for me does wonders improving the look over the factory finished fork guards.Products to buy together - The Honda Monkey 125 has no carbon fibre parts fitted from the factory, so the purchasing of other high quality parts like the fork guards from Tyga Performance would be perfect. More carbon fibre to replace the factory plastic moulded parts is what I would recommend.Difficulty of installation - The installation of the fork guards is a simple task that took 0.2 of an hour to complete. Some mechanical aptitude and the use of basic hand tools is what is required to mount the fork guards to the lower fork legs.Cost performance and comparison with other products - I find the cost of all the products Tyga Performance sell to be higher then what most other companies sell their products for and the fork guards is no different, but this is due to the high quality materials used and the consistent high quality finish of their products.About shipping and packaging - With there being no cost difference between sea freight and EMS for the fork guards, I chose EMS for an earlier arrival date. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box.Any concerns, cautions, or advice when purchasing - Webike Japan is the first place I look to for all my motorcycle needs. From service parts to performance products and even motorcycle gear and apparel, Webike always seem to satisfy my needs in regards to availability and pricing.View Detail

About quality and texture - The grab bar from SP Takegawa is made from pieces of plate and steel tube with precision bents that are TIG welded together with a chrome surface finish, the quality from the overall fit and finish is perfect.About the feeling of use - The grab bar design perfectly matches the original styling of the Honda Monkey and a grab bar also adds convenience when wanting to maneuver the bike in tight spaces.Products to buy together - The key product to buy together with the grab bar is the fender eliminator from SP Takegawa to complete the look of the rear end by removing the over sized plastic fender.Difficulty of installation - The installation of the grab bar is a simple task that took 0.5 of an hour to complete. Some slight mechanical aptitude and the use of basic hand tools is all that is required to secure the grab bar to the frame.Cost performance and comparison with other products - I find the cost of all the products SP Takegawa sell to be on par when compared to what most other companies sell their products for and the grab bar is no different.About shipping and packaging - This was part of a big order and sea frieght was used to keep the costs down. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box. Any concerns, cautions, or advice when purchasing - For my location, purchasing specialty products like this from Webike Japan is the only option. There are a few local stores selling parts for the Monkey 125 but the range is very limited. View Detail

About quality and texture - The GP performance full exhaust from Over Racing is made from titanium with a titanium drag blue finish, the quality from the overall fit and finish is perfect. About the feeling of use - The GP performance titanium exhaust system has so much going for it, with the improved performance and reduced weight, the highlight for me is the titanium finish itself. Products to buy together - A key product to purchase with the GP performance full exhaust would be an open air intake to continue increasing the appeal by simply removing the original airbox. Difficulty of installation - The installation of the GP performance full exhaust is a simple task that took 1 hour to complete. Some mechanical aptitude and the use of basic hand tools is what is required to secure the muffler to the frame via the included bracket and the exhaust pipe to the engine. Cost performance and comparison with other products - I find the cost of all the products Over Racing sell to be on higher price when compared to what most other companies sell their products for but I find other titanium exhausts for the Monkey to be similar this time. About shipping and packaging - This was part of a big order and sea frieght was used to keep the costs down. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box. Any concerns, cautions, or advice when purchasing - For my location, purchasing Tyga Performance products from Webike Japan is the best option when taking into account the shipping cost but depending on where you live you may be better off purchasing from Webike Thailand due to the much low product pricing.View Detail

About quality and texture - The right side cover from Over Racing is made from aluminium but unfortunately the red anodized surface finish on the panel that was delivered to me was incorrect and does not match the left side cover, making the set unsuitable for installation. Within a week of Webike being notified of the issue, the part is on the way back to Japan and once received a replacement will be resent at no additional cost to me. About the feeling of use - This modern angular and slim designed right side cover will nicely fill the open space left after removing the original high mount exhaust and also will not contact the inside of my leg unlike other bulky aftermarket right side cover would when using my lower profile seat. Products to buy together - A key product to purchase would have to be the matching left side cover, which further increase the appeal of the Monkey 125 by the removal of the less then ideal bulky original plastic part. Difficulty of installation - The installation of the right side cover will be a simple task and I can see it only taking me 0.2 hour to complete. The use of basic hand tools is all that will be required to secure the panel directly to the frame with the included spacer and fasteners.Cost performance and comparison with other products - I find the cost of all the products Over Racing sell to be on high when compared to what most other companies sell their products for but that is not the case this time as similar style right side cover are of the same price. About shipping and packaging - This was part of a bigger order and sea frieght was used to keep the costs down. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box.Any concerns, cautions, or advice when purchasing - Webike Japan is the first place I look to for all my motorcycle needs. From service parts to performance products and even motorcycle gear and apparel, Webike always seem to satisfy my needs in regards to availability and pricing.View Detail

About quality and texture - The type 1 grey and black Monkey sticker from Honda are made using polyvinyl chloride sheet with a polypropylene film, the quality from the overall fit and finish is perfect.About the feeling of use - Original sticker to complete the addition of an aftermarket right side cover on the Monkey 125 or even add it to the wall of stickers in the workshop.The metallic finish in the sticker is a thing of beauty.Products to buy together - This particular sticker goes hand in hand with an aftermarket right side cover when you are no longer using the original up style exhaust and have switched to a low style exhaust.Difficulty of installation - The installation of the type 1 grey and black Monkey sticker is an simple task that took 0.5 of an hour to complete.Common sense and a technique to evenly align the sticker is what is required to secure the sticker to the side cover.Cost performance and comparison with other products - I find the cost of all the products Honda sell to be very reasonable when compared to what some of the other companies sell their products for and the type 1 grey and black Monkey sticker is no different.About shipping and packaging - With there being no cost difference between sea freight and EMS for the type 1 grey and black Monkey sticker , I chose EMS for an earlier arrive date. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box.Any concerns, cautions, or advice when purchasing - Webike Japan is the first place I look to for all my motorcycle needs. From service parts to performance products and even motorcycle gear and apparel, Webike always seem to satisfy my needs in regards to availability and pricing.View Detail

About quality and texture - The headlight brackets from SP Takegawa is made from billet aluminum with detailed machining and a silver anodized surface finish, the quality from the overall fit and finish is perfect.About the feeling of use - I was unimpressed with the finish of the original headlight brackets with their plain painted finish. The transformation with the simple addition of these headlight brackets is amazing and I am more then satisfied with their slim design .Products to buy together - SP Takegawa have many products to purchase to continue adding a more attractive appearance to the Monkey 125 but the first on my list to go with the headlight brackets is the frame plugs as this is a small parts with a big impact.Difficulty of installation - The installation of the headlight bracket is a simple task that took 1.0 hour to complete. Common sense and the use of basic hand tools is all that is required secure the headlight brackets to the fork area with the included hardware.Cost performance and comparison with other products - I find the cost of all the products SP Takegawa sell to be on par when compared to what most other companies sell their products for and the headlight brackets are no different.About shipping and packaging - With there being no cost difference between sea freight and EMS for the headlight brackets, I chose EMS for an earlier arrival date. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box.Any concerns, cautions, or advice when purchasing - Webike Japan is the first place I look to for all my motorcycle needs. From service parts to performance products and even motorcycle gear and apparel, Webike always seem to satisfy my needs in regards to availability and pricing.View Detail