Allow the use of a stand with hooks for a extremely stable working platform

About quality and texture:G-Craft’s usual high machining quality is present here. CNC aluminum parts are lightweight, well-finished, and anodized for durability. The etched logo adds a clean custom touch.About the feeling of use:Provides a reliable hook point for a rear stand. Lifts the bike securely with no flex or misalignment. Also adds a stylish element to the rear suspension area.Products to buy together:Rear paddock stand with hook adapter is what's needed to make the most of these suspension hooks. Also front stand hooks that secure to the lower fork legs will allow for the front of the bike to be lifted too.Difficulty of installation:Very easy. Just remove the shock nuts, install the hook in it's place and torque to spec. Takes less than 15 minutes.Cost performance and comparison with other products:More expensive than basic hooks that secure to a swingarm, but far superior in build, fit, and finish. A premium option for those who value quality and reliability.About shipping and packaging:Well-packaged by Webike. Arrived in perfect condition with all hardware included.Any concerns, cautions, or advice when purchasing:Finish can scratch if you're careless with stand hooks. Make sure to torque bolts properly and check compatibility with your rear stand.Final thoughts:A small but very effective upgrade for frequent maintainers. Looks great, performs well, and adds utility without compromising the bike’s aesthetics.View Detail

About quality and texture - The front stand hooks from G-Craft is made from billet aluminum with detailed machining with a mix of silver and black anodized surface finishes, the quality from the overall fit and finish is perfect.About the feeling of use - I found using my front head stem stand overkill when raising my Monkey125 for detailing. The addition of the front stand hooks were the perfect solution to allow the use of a stand with hooks for a extremely stable working platform.Products to buy together - The product to purchase together with the front stand hooks would be a grab bar which is super useful when maneuvering the Monkey 125 around the garage for maintenance and storage.Difficulty of installation - The installation of the front stand hooks is a simple task that took 0.5 of an hour to complete. Common sense and the use of basic hand tools is what is required to secure the hooks to the lower front legs.Cost performance and comparison with other products - I find the cost of all the products G-Craft sell to be on par when compared to what most other companies sell their products but these front stand hooks are priced higher.About shipping and packaging - With there being no cost difference between sea freight and EMS for front stand hooks, I chose EMS for an earlier arrival date. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box.Any concerns, cautions, or advice when purchasing - Webike Japan is the first place I look to for all my motorcycle needs. From service parts to performance products and even motorcycle gear and apparel, Webike always seem to satisfy my needs in regards to availability and pricing.View Detail

About quality and texture - The suspension spool from G-Craft is made from billet aluminum with detailed machining and a mix of silver and black anodized surface finishes, the quality from the overall fit and finish is perfect.About the feeling of use - I found using my rear stand with the platform fiitings a little uneasy due to the constant shifting. The addition of the suspension spools was the perfect solution to allow the use of my rear stand with hooks for a extremely stable working platform.Products to buy together - The product to purchase together with the suspemsion spools would be a grab bar which is super useful when maneuvering the Monkey 125 around the garage for maintenance and storage.Difficulty of installation - The installation of the suspension spools is a simple task that took 0.4 of an hour to complete. Common sense and the use of basic hand tools is what is required to secure the spools to the lower rear suspension mounting points.Cost performance and comparison with other products - I find the cost of all the products G-Craft sell to be on par when compared to what most other companies sell their products but these suspension spools are higher.About shipping and packaging - With there being no cost difference between sea freight and EMS for the suspension spools, I chose EMS for an earlier arrival date. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box.Any concerns, cautions, or advice when purchasing - Webike Japan is the first place I look to for all my motorcycle needs. From service parts to performance products and even motorcycle gear and apparel, Webike always seem to satisfy my needs in regards to availability and pricing.View Detail

About quality and texture, I can confirm that the quality is great and that the material used is aluminum that is CNC machined to shape and finished with a orange anodized coating. About the feeling of use, I am happy with the addition of these swingarm covers with stand hooks to ad in easier maintenance on the drive chain and help protect the Grom while also adding some some style when compared to the original parts. Products to buy together, H2C have a full range of products specifically for the Grom and the front wheel ends would be ideal to also add to your cart to help add some protection to the front wheel. Difficulty of installation, I can say the fitment of the swingarm covers with stand hooks for my installation was average due to the rear end requiring to be lifted and supported to allow for removal of the rear axle before fitting. Cost performance and comparison with other products, The pricing of the product is great. You receive a simple yet effective designed part to ad in supporting and protecting your Grom. There are higher priced option available that incorporate a new chain adjustment but I find the H2C option to be great for the price they costs. About shipping and packaging, My order was shipped within 48 hours of me placing the order and I received a few emails advising me of the status up until the order was dispatched. I find the link supplied to track my order very useful and the order arrived within the estimated date range. Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs.View Detail

About quality and texture, I can confirm that the quality is great and that the material used is aluminum that is CNC machined to shape and finished with a black and silver anodized coating. About the feeling of use, The suspension spools are light weight and of a strong construction but the contact surface does mark up when used with steel pick up hooks. A must have addition for the Monkey 125 if you do your own maintenance. Products to buy together, Other highly detailed parts from G-Craft to help improve rider experience like the spindle holder would be ideal to add to your cart. Difficulty of installation, I can say the fitment of the suspension spools for my installation was very easy due to the ease of access and simple nature of securing the spool ends with a spanner. Cost performance and comparison with other products, The pricing of the product is great. You receive a well designed part made from a high quality material with a matching finish. There is a cheaper option available but these are worth the extra money. About shipping and packaging, My order was shipped within 24 hours of the product being in stock and I received a few emails advising me of the status up until the order was dispatched. The order arrived within the estimated date range and was extremely well packaged. I found the link supplied to track my order very useful while I was waiting for the order to land in the country. Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs.View Detail

About quality and texture - The cylinder base gasket from K-Pit is made from a paper like gasket material, the quality from the overall fit and finish is perfect.About the feeling of use - K-Pit make it too easy to maintain the Honda Monkey 125 engine. All the gaskets and wear items are available to be purchased separately as required, which is nice as it can save you some money.Products to buy together - A key product to purchase when freshening up the top end of the engine is new O-Rings for the valve and cam inspection covers as they tend to leak quite badly in these locations over time.Difficulty of installation - The installation of the cylinder base gasket is an advanced task that took 1 hour to complete. Mechanical aptitude and the use of assorted hand tools is what is required to disassemble this part of the engine, to be able to replace this gasket and then button the engine back up.Cost performance and comparison with other products - I find the cost of all the products K-Pit sell to great value when compared to what most other companies sell their products for and the cylinder base gasket is no different.About shipping and packaging - With there being no cost difference between sea freight and EMS for the cylinder base gasket I chose EMS for an earlier arrive date. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box.Any concerns, cautions, or advice when purchasing - Webike Japan is the first place I look to for all my motorcycle needs. From service parts to performance products and even motorcycle gear and apparel, Webike always seem to satisfy my needs in regards to availability and pricing.View Detail

About quality and texture - The right side crankcase cover gasket from K-Pit is made from a paper like gasket material, the quality from the overall fit and finish is perfect.About the feeling of use - No noticeable oil leak from the old gasket but after having the clutch cover removed for some time with the gasket exposed, I was not confident the old gasket would seal well if re-used so the gasket was replaced this time around.Products to buy together - A key product to purchase when carrying out general maintenance on the engine is a new crush washer for the oil drain bolt as this bolt is removed quite regularly for oil changes.Difficulty of installation - The installation of the right side crankcase cover gasket is a simple task that took 0.5 of an hour to complete. Some mechanical aptitude and the use of basic hand tools is required to secure the gasket between the right side crankcase cover and the crankcase.Cost performance and comparison with other products - I find the cost of all the products K-Pit to great value when compared to what most other companies sell their products for and the right side crankcase cover gasket is no different.About shipping and packaging - With there being no cost difference between sea freight and EMS for the right side crankcase cover gasket, I chose EMS for an earlier arrive date. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box.Any concerns, cautions, or advice when purchasing - Webike Japan is the first place I look to for all my motorcycle needs. From service parts to performance products and even motorcycle gear and apparel, Webike always seem to satisfy my needs in regards to availability and pricing.View Detail

About quality and texture - The 4-Valve superhead 145cc big bore kit from SP Takegawa is made from aluminium and steel, using cast and machined processes, the quality from the overall fit and finish is perfect.About the feeling of use - The larger 145cc displacement cylinder, matching piston and super 4-valve head transforms the original 125cc 2-valve engine setup into an absolute beast.Products to buy together - The key product to buy together with the 4-Valve superhead 145cc big bore kit is the fuelling system from aRacer that allows for perfectly controlled engine management for the big bore kit.Difficulty of installation - The installation of the 4-Valve superhead 145cc big bore kit is an advanced task that took 3.0 hours to complete, with the preparation and alignment of the piston rings taking quite some time. Mechanical aptitude and the use of basic hand tools is what is required to secure piston to the crankshaft and fit in the cylinder and adjust the valve lash after fitting the new head and camshaft.Cost performance and comparison with other products - I find the cost of all the products SP Takegawa sell to be on par when compared to what most other companies sell their products for but the 4-Valve superhead 145cc big bore kit is priced higher, and for good reason.About shipping and packaging - With there being a significant cost difference between sea freight and EMS for the 4-Valve superhead 145cc big bore kit, I chose sea frieght for the cost saving. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box.Any concerns, cautions, or advice when purchasing - Webike Japan is the first place I look to for all my motorcycle needs. From service parts to performance products and even motorcycle gear and apparel, Webike always seem to satisfy my needs in regards to availability and pricing. View Detail

About quality and texture - The racing back step kit from Tyga Performance is made from billet aluminium with detailed machining and a silver anodized surface finish, along with carbon fibre and a gloss surface finish, the quality from the overall fit and finish is perfect. About the feeling of use - The racing back step kit offers a stunning new look with it's unique design and high quality finishes. While the re-location of the footpeg position adds a much sportier feel.Products to buy together - The Honda Grom is an inexpensive motorcycle with a lot of low quality parts from the factory, so the purchasing of other high quality parts like the racing step back kit from Tyga Performance would be perfect and high on the list would have to be the keyless racing tank cap.Difficulty of installation - The installation of the racing back step kit is a intermediate task that took 2 hours to install and adjust. Some mechanical aptitude, knowledge on disassembling the Honda Grom and the use of basic hand tools is what is required to secure between the frame and the swingarm.Cost performance and comparison with other products - I find the cost of all the products Tyga Performance sell to be higher then what most other companies sell their products for and the racing back step kit is no different, but this is due to the high quality materials used and the consistent high quality finish of their products.About shipping and packaging - With there being a significant cost difference between sea freight and EMS for the rear brake bracket, I chose sea fright for the cost savings. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box.Any concerns, cautions, or advice when purchasing - Webike Japan is the first place I look to for all my motorcycle needs. From service parts to performance products and even motorcycle gear and apparel, Webike always seem to satisfy my needs in regards to availability and pricing.View Detail

About quality and texture - The front caliper support from G-Craft is made from billet aluminium with detailed machining and a silver anodized surface finish, the quality from the overall fit and finish is perfect.About the feeling of use - The front caliper support offers a simple solution for ABS and non-ABS models when you are looking for improved stopping power by adding a P2 Brembo brake caliper.Products to buy together - The Honda Monkey 125 is an inexpensive motorcycle with a lot of low quality parts from the factory, so the purchasing of other high quality parts like this front caliper support from G-Craft would be perfect but the essential product to purchase to complete the installation is the Brembo P2 brake caliper or similar.Difficulty of installation - The installation of the front caliper support is a intermediate task that took 1 hour to complete. Some mechanical aptitude and the use of basic hand tools is what is required to secure the front caliper support to the lower fork leg.Cost performance and comparison with other products - I find the cost of all the products G-Craft sell to be on par when compared to what most other companies sell their products for and that is no different with the front caliper support.About shipping and packaging - This was part of a bigger order and sea frieght was used to keep the costs down. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box.Any concerns, cautions, or advice when purchasing - Webike Japan is the first place I look to for all my motorcycle needs. From service parts to performance products and even motorcycle gear and apparel, Webike always seem to satisfy my needs in regards to availability and pricing.View Detail