About quality and texture a pretty good quality finish About the feeling of use There is no difference from SHIFT UP BREATHER HOSE END PRODUCT #950021-02Products to buy together Carbon Oil Catch Tank [616-1432200] - KITACO Internal diameter 8 mm hoseDifficulty of installation EASYCost performance and comparison with other products I installed SHIFT UP BREATHER HOSE END PRODUCT # 950021-02, but I didn't like the hose fixing, so I chose this product and I was able to finish it neatlyAbout shipping and packaging It took a week and the packaging is greatAny concerns, cautions, or advice when purchasing It was nice to have a clean finish, and it feels a little special. Kitaco oil catch and internal diameter fit well, so there was no problem installing itView Detail

About quality and texture - Top Quality. Solid rubber body with perfect sized filter element for an oil catch tank system.About the feeling of use - Firm fit into the Takegawa 8mm breather hose and tucks up nicely out of the way due to being a mini filter.Products to buy together - I have chosen to make this mini breather filter part of my oil catch tank system so if you are looking to also add one of these sytems to your Monkey I'd recommend the ones Takegawa have available which come with almost everything you will need.Difficulty of installation - Simple to install the breather filter, just pushes into the hose and comes with a hose clamp to secure it.Cost performance and comparison with other products - Well priced for a top quality part, no need to look elsewhere. When comparing this filter from Shift Up to one from Uni you will see a massive price difference.About shipping and packaging - I think Webike are doing their best with shipping pricing, so I'm happy. Packages ship within 24 hours and arrive very quickly from Japan.Any concerns, cautions, or advice when purchasing - When I first saw the listing for this part I was unable to locate any dimensions. My photo attached has all the dimensions you will need to help workout if this breather filter will be right for your setup.View Detail

I used this mini filter on my Honda Ruckus when modifying the air intake. Although it's designed as a breather, I used it as a mini intake filter on the intake solenoid. It fits snugly over the plastic tube that you remove the hose from as you can see in my picture. Anywhere where there is a nipple type fitting, such as a T-piece that joins three hoses together, this filter can be fitted. Is is too small and the mesh too loose to be used as a direct carburetor intake, but as an auxiliary intake or breather filter it's perfect and cheap.View Detail

This is a nice little filter, meant for breather purposes but ideal for use on the PCV solenoid when modifying the air intake on a Ruckus. Good quality and perfect fit.View Detail

I changed the AirCleanerBox of CROSSCUB to Other Company Product, so I tried using it. Size is perfect, it feels nice. I think that it seems that the connection port of Hose seems to be durable even if it is a Gold genus.View Detail

About quality and texture - The rear rack from Honda is made from pieces of flat bar and steel tube with precision bents that are TIG welded together and plated with a chrome surface finish, the quality from the overall fit and finish is perfect.About the feeling of use - I feel having a factory Honda rear rack on the Monkey 125 is the best choice for aesthetics but when it comes to practicality this is not the case due to it's small cargo bed dimensions but really it'd all about the look for me.Products to buy together - A key product to buy together with the rear rack for me was a fender eliminator as I wanted to add as much of the original Monkey Z50 styling back to the Monkey 125 and that started with removing unwanted black plastic parts.Difficulty of installation - The installation of the rear rack is a simple task that took 0.5 of an hour to complete. Some slight mechanical aptitude and the use of basic hand tools is all that is required to secure the rear rack to the frame.Cost performance and comparison with other products - I find the cost of all the products Honda sell to be very reasonable when compared to what some of the other companies sell their products for and their rear rack is no different.About shipping and packaging - With there being a no significant cost difference between sea freight and EMS for the rear rack, I chose sea EMS for an earlier arrival date as I was in no particular rush to install the product. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box.Any concerns, cautions, or advice when purchasing - For my location, when purchasing a special factory Honda product like this, it is best to do so from Webike Japan. There are a few local stores selling parts for the Monkey 125 but the product is not available.View Detail

About quality and texture - The clutch outer from Honda is made from aluminium casting and steel machining that are secured together, the quality from the overall fit and finish is perfect.About the feeling of use - I was having issues easily finding neutral and replacing this part solved the problem. The cause was the grooves that wear into the aluminium between the fingers where the clutch disks lay.Products to buy together - A key product to buy together with the clutch outer for me was new clutch disks, there are many options available but I thought the reinforced 6 clutch disk kit Kitaco sell was ideal for my engine setup and it has also replaced other worn aluminium parts in the clutch mechanism.Difficulty of installation - The installation of the clutch outer is a advanced task that took 1.5 hours to complete. Mechanical aptitude, the use of special tools and the knowledge of disassembling the engine is required to secure the clutch outer to the transmission main shaft.Cost performance and comparison with other products - I find the cost of all the products Honda sell to be very reasonable when compared to what some of the other companies sell their products for but this is not the case with the clutch outer as the pricing seems excessive.About shipping and packaging - With there being a significant cost difference between sea freight and EMS for the clutch outer, I chose sea freight to save some money as the part was not required immediately. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box.Any concerns, cautions, or advice when purchasing - Webike Japan is the first place I look to for all my motorcycle needs. From service parts to performance products and even motorcycle gear and apparel, Webike always seem to satisfy my needs in regards to availability and pricing.View Detail

About quality and texture - The left cylinder head cover from Honda is made from cast aluminium and a black painted surface finish, the quality from the overall fit and finish is perfect.About the feeling of use - The finned design of the left cylinder head cover from the Grom is preferred over the flat design of the left cylinder head cover from the Monkey 125 and the colour change gives the engine some character.Products to buy together - More black parts from the Grom engine like the timing cover and crank cover for the left side of the engine and the clutch cover protector for the right side of the engine would be key products to buy together with the left cylinder head cover to balance the colour change.Difficulty of installation - The installation of the left cylinder head cover is a simple task that took 0.1 of an hour to complete. Common sense and the use of basic hand tools is all that is required to secure the cover to the cylinder head after transferring over the O-ring. Cost performance and comparison with other products - I find the cost of all the products Honda sell to be very reasonable when compared to what some of the other companies sell their products for and the left cylinder head cover is no different.About shipping and packaging - With there being no cost difference between sea freight and EMS for the left cylinder head cover, I chose EMS for an earlier arrival date. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box.Any concerns, cautions, or advice when purchasing - Webike Japan is the first place I look to for all my motorcycle needs. From service parts to performance products and even motorcycle gear and apparel, Webike always seem to satisfy my needs in regards to availability and pricing.View Detail

About quality and texture - The exhaust system gasket from Honda is made from a high temperature metal graphite, the quality from the overall fit and finish is perfect.About the feeling of use - No noticeable exhaust leak from the old gasket but since the exhaust system had been installed and removed a few times I thought it best to replace the gasket this time around.Products to buy together - A key product to purchase when carrying out general maintenance on the engine is a new gasket for the clutch cover as this cover is removed quite regularly for access to clean the oil spinner and filter screen.Difficulty of installation - The installation of the exhaust system gasket is an simple task that took 0.1 of an hour to complete. Common sense is all that is required to secure the gasket into the exhaust port in the cylinder head.Cost performance and comparison with other products - I find the cost of all the products Honda sell to be very reasonable when compared to what some of the other companies sell their products for and the exhaust system gasket is no different.About shipping and packaging - With there being no cost difference between sea freight and EMS for the exhaust system gasket, I chose EMS for an earlier arrive date. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box.Any concerns, cautions, or advice when purchasing - Webike Japan is the first place I look to for all my motorcycle needs. From service parts to performance products and even motorcycle gear and apparel, Webike always seem to satisfy my needs in regards to availability and pricing.View Detail

About quality and texture - The cam chain guide roller from Honda is made from a hard rubber bonded onto a steel center, the quality from the overall fit and finish is perfect.About the feeling of use - The cam chain guide roller is a solid little part that constantly cops a beating from the cam chain and it's tension. It's worth your while having an inspection every now and then and keeping an eye out for pieces of rubber in the filter.Products to buy together - Parts within the cam chain tensioner system suffer significant wear with engine upgrades that allow for much higher RPM riding and a key product to buy together with the cam chain guide roller is the cam chain tensioner push rod head.Difficulty of installation - The installation of the cam chain guide roller is an advanced task that took 1 hour to complete due to the disassembly of the engine required to access the area in which the guide roller is installed. Mechanical aptitude and the use of a special tool and basic hand tools is what is required to secure the guide roller to the engine case.Cost performance and comparison with other products - I find the cost of all the products Honda sell to be very reasonable when compared to what some of the other companies sell their products for and the cam chain guide roller is no differentAbout shipping and packaging - With there being no cost difference between sea freight and EMS for the cam chain guide roller, I chose EMS for an earlier arrival date. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box.Any concerns, cautions, or advice when purchasing - Webike Japan is the first place I look to for all my motorcycle needs. From service parts to performance products and even motorcycle gear and apparel, Webike always seem to satisfy my needs in regards to availability and pricingView Detail