About quality and texture - The air filter cover oval taper from SP Takegawa is made from a breathable polyester with a water resistant coating, the quality from the overall fit and finish is perfect.About the feeling of use - A nice addition for my custom air filter install. When I decide to remove the original air box and replace it with a open air filter on any motorcycle, I am always concerned about riding in wet weather but with this product now fitted I am a little less concerned and also helps extend the service life of the air filter. Products to buy together - Another product to purchase when looking to further increase your wet weather protection on the Monkey 125 would be a low mount front fender kit, that way the water spray fron the front wheel better contained and less likely to cover the engine.Difficulty of installation - The installation of the air filter cover oval taper is a simple task that took 0.1 of an hour complete. Common sense and the use your hands is what is required to pull the air filter cover over the air filter and secure the elastic side around the air filter base.Cost performance and comparison with other products - I find the cost of all the products SP Takegawa sell to be on par when compared to what most other companies sell their products for and the air filter cover oval taper is no different. About shipping and packaging - With there being no cost difference between sea freight and EMS for the air filter cover oval taper, I chose EMS for an earlier arrive date. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box.Any concerns, cautions, or advice when purchasing - Webike Japan is the first place I look to for all my motorcycle needs. From service parts to performance products and even motorcycle gear and apparel, Webike always seem to satisfy my needs in regards to availability and pricing.View Detail

About quality and texture, I can confirm that the quality is great and that the materials used are a combination of polyester mesh, plastic piping and elastic to form the shape and secure the air filter cover in place. About the feeling of use, The air filter cover not a mandatory part but does add a lot of positives with its installation like the ability to resist water from being aborbed by the air filter and the increased service life of the air filter due to the improved dust prevention. Products to buy together, Adding more parts to your cart to increase the reliability of your engine would be ideal. Kitaco and SP Takegawa are the manufactures to purchase parts like the oil cooler. Difficulty of installation, I can say the fitment of the air filter cover for my installation was very easy due to the simple nature of the process hen used with the matching air filter. Cost performance and comparison with other products, Pricing of this product is great. You receive a high quality finshed part that will save you spending money on air filter replacement as they will be needed less and sold cheaper then the equivalent part sold by K&N. About shipping and packaging, My order was shipped within 24 hours of the product being in stock and I received a few emails advising me of the status up until the order was dispatched. The order arrived within the estimated date range and was extremely well packaged. I found the link supplied to track my order very useful while I was waiting for the order to land in the country. Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs.View Detail

About quality and texture It looks like a waterproof cover, but it's like a net. It's going to rip faster than I thoughtAbout the feeling of use It looks like there's nothing wrong with breathing in air because it's a net Since it's rainy season, the bike is on standby, so I bought it to defend against foreign substancesProducts to buy together SPTAKEGAWA Air Filter (Type-2) (Taper / 46 mm)Difficulty of installation be easy to installCost performance and comparison with other products It's not expensive if you think it's necessaryAbout shipping and packaging It took a week and the packaging was greatAny concerns, cautions, or advice when purchasing I think it protects the filter and it's expensive to buy Because the same filter is similar in price I don't recommend it unless you're on standby for a long timeView Detail

* About quality and texture, The air filter cover is made from a very thin yet strong material with an elastic sided end to secure itself firmly to the air filter.* About the feeling of use, Once fitted I noticed no negitive in regards to performance but only a positive in regards to the water resistance capability of this air filter cover.* Products to buy together, From my experience this air filter cover will work on many different branded oval air filters and not just the ones from SP Takegawa but if you are in the market for a new air filter for the best fit I'd also go with the oval air filter from SP Takegawa.* Difficulty of installation, Removed from the packaging and slipped straight over the air filter. The process was completed in 5 minutes with no difficultly.* Cost performance and comparison with other products, Much cheaper then the K&N pre-charger cover and the one from SP Takegawa not only state their ability to improve the dust prevention to the air filter but also state their water resistance ability.* About shipping and packaging, I am happy to wait 6 weeks on average for my parts to arrive in Sydney Australia via Webike's sea freight which comes with tracking and insurance so I know I'm covered in case something was to go wrong but with there outstanding bubble wrapping and boxing there have been no problems.* Any concerns, cautions, or advice when purchasing, If you want your air filter to be completely water proof this cover will not do that job and you should look at purchasing a Sprint Filter. Use the product reviews to assist in making a decision on your purchase.View Detail

About quality and texture - Top quality. The cover material is light weight and I can comfirm it is water resistant as I have been caught out in the rain a few times now.About the feeling of use - I feel this cover is performing as expected which is great. I have removed and reinstalled the cover a few times now and the elastic securing the cover to the air filter is holding up well.Products to buy together - The cover will only be of useful if you have an oval taper air filter from Takegawa, so you will be needing one of these too.Difficulty of installation - Installation of the cover is easy but I do try and be gentle when removing and installing it as to prevent any damage being created as the material does feel delicate.Cost performance and comparison with other products - I find the cost of the cover very reasonable considering it will extend the life of your air filter and it makes using a pod style air filter more exceptable in all weather conditions. Also Takegawa pricing beats the other brands offering covers like this.About shipping and packaging - I think Webike are doing their best with shipping pricing, so I'm happy. Packages ship within 24 hours and arrive very quickly from Japan.Any concerns, cautions, or advice when purchasing - With the cover being exposed to the elements I don't know how long the water resistant feature of the cover will last so you will want to keep an eye on this and recoat when needed.View Detail

About quality and texture - The rear rack from Honda is made from pieces of flat bar and steel tube with precision bents that are TIG welded together and plated with a chrome surface finish, the quality from the overall fit and finish is perfect.About the feeling of use - I feel having a factory Honda rear rack on the Monkey 125 is the best choice for aesthetics but when it comes to practicality this is not the case due to it's small cargo bed dimensions but really it'd all about the look for me.Products to buy together - A key product to buy together with the rear rack for me was a fender eliminator as I wanted to add as much of the original Monkey Z50 styling back to the Monkey 125 and that started with removing unwanted black plastic parts.Difficulty of installation - The installation of the rear rack is a simple task that took 0.5 of an hour to complete. Some slight mechanical aptitude and the use of basic hand tools is all that is required to secure the rear rack to the frame.Cost performance and comparison with other products - I find the cost of all the products Honda sell to be very reasonable when compared to what some of the other companies sell their products for and their rear rack is no different.About shipping and packaging - With there being a no significant cost difference between sea freight and EMS for the rear rack, I chose sea EMS for an earlier arrival date as I was in no particular rush to install the product. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box.Any concerns, cautions, or advice when purchasing - For my location, when purchasing a special factory Honda product like this, it is best to do so from Webike Japan. There are a few local stores selling parts for the Monkey 125 but the product is not available.View Detail

About quality and texture - The clutch outer from Honda is made from aluminium casting and steel machining that are secured together, the quality from the overall fit and finish is perfect.About the feeling of use - I was having issues easily finding neutral and replacing this part solved the problem. The cause was the grooves that wear into the aluminium between the fingers where the clutch disks lay.Products to buy together - A key product to buy together with the clutch outer for me was new clutch disks, there are many options available but I thought the reinforced 6 clutch disk kit Kitaco sell was ideal for my engine setup and it has also replaced other worn aluminium parts in the clutch mechanism.Difficulty of installation - The installation of the clutch outer is a advanced task that took 1.5 hours to complete. Mechanical aptitude, the use of special tools and the knowledge of disassembling the engine is required to secure the clutch outer to the transmission main shaft.Cost performance and comparison with other products - I find the cost of all the products Honda sell to be very reasonable when compared to what some of the other companies sell their products for but this is not the case with the clutch outer as the pricing seems excessive.About shipping and packaging - With there being a significant cost difference between sea freight and EMS for the clutch outer, I chose sea freight to save some money as the part was not required immediately. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box.Any concerns, cautions, or advice when purchasing - Webike Japan is the first place I look to for all my motorcycle needs. From service parts to performance products and even motorcycle gear and apparel, Webike always seem to satisfy my needs in regards to availability and pricing.View Detail

About quality and texture - The left cylinder head cover from Honda is made from cast aluminium and a black painted surface finish, the quality from the overall fit and finish is perfect.About the feeling of use - The finned design of the left cylinder head cover from the Grom is preferred over the flat design of the left cylinder head cover from the Monkey 125 and the colour change gives the engine some character.Products to buy together - More black parts from the Grom engine like the timing cover and crank cover for the left side of the engine and the clutch cover protector for the right side of the engine would be key products to buy together with the left cylinder head cover to balance the colour change.Difficulty of installation - The installation of the left cylinder head cover is a simple task that took 0.1 of an hour to complete. Common sense and the use of basic hand tools is all that is required to secure the cover to the cylinder head after transferring over the O-ring. Cost performance and comparison with other products - I find the cost of all the products Honda sell to be very reasonable when compared to what some of the other companies sell their products for and the left cylinder head cover is no different.About shipping and packaging - With there being no cost difference between sea freight and EMS for the left cylinder head cover, I chose EMS for an earlier arrival date. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box.Any concerns, cautions, or advice when purchasing - Webike Japan is the first place I look to for all my motorcycle needs. From service parts to performance products and even motorcycle gear and apparel, Webike always seem to satisfy my needs in regards to availability and pricing.View Detail

About quality and texture - The exhaust system gasket from Honda is made from a high temperature metal graphite, the quality from the overall fit and finish is perfect.About the feeling of use - No noticeable exhaust leak from the old gasket but since the exhaust system had been installed and removed a few times I thought it best to replace the gasket this time around.Products to buy together - A key product to purchase when carrying out general maintenance on the engine is a new gasket for the clutch cover as this cover is removed quite regularly for access to clean the oil spinner and filter screen.Difficulty of installation - The installation of the exhaust system gasket is an simple task that took 0.1 of an hour to complete. Common sense is all that is required to secure the gasket into the exhaust port in the cylinder head.Cost performance and comparison with other products - I find the cost of all the products Honda sell to be very reasonable when compared to what some of the other companies sell their products for and the exhaust system gasket is no different.About shipping and packaging - With there being no cost difference between sea freight and EMS for the exhaust system gasket, I chose EMS for an earlier arrive date. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box.Any concerns, cautions, or advice when purchasing - Webike Japan is the first place I look to for all my motorcycle needs. From service parts to performance products and even motorcycle gear and apparel, Webike always seem to satisfy my needs in regards to availability and pricing.View Detail

About quality and texture - The cam chain guide roller from Honda is made from a hard rubber bonded onto a steel center, the quality from the overall fit and finish is perfect.About the feeling of use - The cam chain guide roller is a solid little part that constantly cops a beating from the cam chain and it's tension. It's worth your while having an inspection every now and then and keeping an eye out for pieces of rubber in the filter.Products to buy together - Parts within the cam chain tensioner system suffer significant wear with engine upgrades that allow for much higher RPM riding and a key product to buy together with the cam chain guide roller is the cam chain tensioner push rod head.Difficulty of installation - The installation of the cam chain guide roller is an advanced task that took 1 hour to complete due to the disassembly of the engine required to access the area in which the guide roller is installed. Mechanical aptitude and the use of a special tool and basic hand tools is what is required to secure the guide roller to the engine case.Cost performance and comparison with other products - I find the cost of all the products Honda sell to be very reasonable when compared to what some of the other companies sell their products for and the cam chain guide roller is no differentAbout shipping and packaging - With there being no cost difference between sea freight and EMS for the cam chain guide roller, I chose EMS for an earlier arrival date. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box.Any concerns, cautions, or advice when purchasing - Webike Japan is the first place I look to for all my motorcycle needs. From service parts to performance products and even motorcycle gear and apparel, Webike always seem to satisfy my needs in regards to availability and pricingView Detail