Nhận hàng nhanh chóng , sản phẩm hoàn hảo , lắp đặt dễ dàng, tôi cảm thấy hài lòng khi mua hàng ở đây , khuyến khích mọi người cũng vậyView Detail

Having to do a rebuild on the swingarm of this Honda CBR600RR that is a friends bike. It has been a long way and done a lot of miles and needs a little bit of TLC. I found the correct needle bearing for this model by checking Honda schematics and this model of bike. Pretty straight forward really. Locally I could have gotten this needle bearing but I was already ordering from Webike so decided to get all at the same time. The cost from Webike was also a lot cheaper too which did sway me some. Along with the other parts for this rebuild, I got them al shipped using EMS. My order was delivered in 5 days and was very well packaged. The needle bearing did come in the standard Honda packet and was wrapped in lots of padding by Webike warehouse. The bearing itself is a very neat and tidy bearing. The outer race is smooth and well machined. The inner race was smooth as you like on turning. There was plenty of lubrication from factory which pleased me. Top quality part direct from Honda. Why would you even bother with cheaper and probably inferior parts. Very pleased with this purchase. Thank you View Detail

After a small lowside there were a couple of minor parts that took some damage. One of these was the right side chain adjuster along with the rear wheel washer too. As I already was ordering the parts required, I had the Honda schematics open. This meant finding the right part number was super simple. The price was very low and as expected from Webike. With the rear wheel washer and a few other parts for various bikes, I got them all shipped using EMS. In 5 days my order arrived. All packaged expertly by Webike warehouse and fully protected. The chain adjuster came in the standard Honda packet and kept safe with additional packaging. The quality is excellent. The threaded section on the end is super smooth and the lock nut goes on easily. No issues at all. The finish is a smoothed out silver, so basically no additional coating. I would hazard a guess at stainless steel but cannot be sure. Fitting was easy too, adjusting back to where it was originally was pretty easy too. One last spin of the wheel to make sure alignment was perfect and this was another job completed. Very pleased with the service from Webike throughout. Thanks View Detail

Producto excelente y a buen precio. Producto original honda y tal como se describe. Sin duda volveré a comprar otro en webike.View Detail

There was a bit of an issue with the dust seal on the rear of this bike which I wanted to swap out. It was ok but not what I want on a bike which was this young. I found the right part by using the tools Webike provide on their help pages and then cross referencing on Honda schematics for my own peace of mind. The dust seals do actually fit a few other models so seems to be in stock on Webike website. The cost of these are really good value and better than could be sourced locally. Although they are not expensive, I did want a few other small parts for other bikes so I decided I would buy all together. In 5 days from being shipped, my order arrived. The dust seals came in the standard Honda packet and were wrapped up. The seals are really flexible but they do feel really strong and I was able to manoeuvre them into place relatively easily. A very small part but worth the effort involved to make sure the seals are good. Pleased with the purchase, thank you Webike for your hard work. View Detail

This is the left side grip which was a necessary part for a bike. I have started rebuilding this CB1100 2014 which requires a lot of genuine Honda parts. I could buy random after market parts but sometimes, you just have to get the genuine ones. I decided on this OEM one as it is with fitting the era of the age of bike I am doing. The part number was not hard to find and also cross referencing with Honda schematics was even easier. Added to my order with a few other parts as well as the right hand side grip. Using EMS all my order was shipped and delivered in 5 days solid. The package was well padded and no damage to any of the parts I ordered. This left hand grip is beautiful. I know it's just a grip but the look on it's own is great and of course the quality is effect as always from Honda. The OEM was definitely the best choice for this bike. The rubberised grip is super sticky and tactile to touch. Fits easily on the 22mm handlebars for the rebuild. There is a ton of flexibility but even with that, it fits spot on. Super happy with this product. Thank you Webike. Absolutely love them. View Detail

These were other part that was for a CBR900RR I got in from a customer. This time it is the front brake pads for the bike as the old ones were well beyond their usage. I did change the rear pads on this service too as they were not the best shape. Usually on these bigger bikes, the front need changing twice as often as the rear anyway but the rear was not changed last service, so it was time. Finding the right ones was easy but checking on EBC's own website pulled up the right ones. Luckily, they had a set in their warehouse and so added to my order. EMS shipped my order and all arrived in perfect condition in 5 days from being shipped. Everything was well padded out in the box so there was no damage. These pads are EBC so I know these are cracking pads for this bike. Plus, the pads do last quite a while, probably longer than these should have as the customer clearly prefers the front brake to the rear. The pad material is even and looks pretty tasty for this big bike. Perhaps not as smoothly sintered as I have previously had but they do have some heavy compound in them. Very happy customer and thank you once again Webike for doing a great job. View Detail

I had a small scratch on one of my decals so decided it was about time to get that changed for my bike to look new again. Finding the correct graphic was not particularly hard using the Yamaha Parts Catalogue. The shipping was good due to the fact I already had other items in my order. From ordering to being delivered was 8 days including a weekend and Webike waiting for the stock to arrive at their warehouse so not bad at all. Upon delivery all the items were very well packaged. I was a little worried that with this decal being flat that there may be issues with it being folded. Nope, this was not the case. It was nestled neatly in the bottom of the box, surrounded by padding. The decal itself looks awesome on and the quality was second to none. Really a flawless decal/graphic and now the bike looks 100%. Thanks for the help Webike, great stuff View Detail

This is the final part for the MT07 cylinder and piston rebuild due to piston ring failure and some help for the owner of the bike. This part was the head cover 1 gasket. The original gasket was in good shape but still, why reuse when Webike sell the new ones for not much outlay. There is no real point in changing just one part when you essentially need the whole kit to do the job right. The part was not hard to find and I used the tools Webike provide and cross referencing with Yamaha schematics. All my parts were shipped together via EMS and arrived with me in perfect condition in 5 days solid. This gasket along with the other cylinder head gasket was kept nice and flat and came on the regular Yamaha cardboard. Webike also wrapped this up well to protect from bends or damage. Perfect as always. The quality is exceptional as I would expect from Yamaha. The tolerance is spot on and no need to worry going forward. Now all the parts are here and in place I can start the big job of the rebuild and finally get this little bike back where it belongs, the open road. Thank you Webike for the great effort you put into every order. Very much appreciated View Detail

This bike, the ZX-6R, a new clutch cable was needed as the existing one was starting to fray. No point in waiting for it to actually snap so this needed replacing fast. After checking on Webike website, I found them to have an absolutely fantastic price, well less than half what they are in the UK from genuine Kawasaki parts dealer. Unfortunately though, the Kawasaki dealer in the UK could not give an estimate of when they would be able to get the parts needed. Not an issue with Webike. As these were part of a larger order with other ZX-6R parts, the shipping was brilliant, not expensive and not too cheap, express delivery is what I went for. From ordering all the different parts in the order to being delivered to my door was literally just 5 days. Including a weekend and the wait time for Webike to source the parts from the different manufacturers. How good is that. Upon receipt, the box was perfect and as Webike package all these very well indeed, nothing was damaged. There was also another layer of padding on top. What more can you ask for. The cable came in it's own Kawasaki packet and was in perfect condition when it arrived. The lug was secure, the cable nicely lubricated so slide through the guide outer easily. Fitting is not difficult on an road bike as not really much gets in the way. Now the clutch feels a whole lot better. Happy days. Great company, great service, great genuine products. 10 out of 10 for Webike. Very happy customer. View Detail