Лампочка на гос номер Honda Lead 125, 2015 года. Подходит на свое место. Товар соответствует описанию. Рекомендую к покупке. Заказал в Алмату, пришла через 2 недели. View Detail

This is manufacture by Honda. Genuine part made in Japan. Good quality with high durable rubber material. RecommendedView Detail

* About quality and texture, The front turn signal bulb is dual filament that allows the front turn signals to operate as day time running light and turn signal.* About the feeling of use, The replacement turn signal bulb has brought the Grom back up up to standard after a slight mishap resulted in day time running light filament in the turn signal bulb going out. Perfect Honda fit and finish.* Products to buy together, Due to the mishap I was also needing a new turn signal lens.* Difficulty of installation, The installation requires the removal of one screw from the inner lower corner of the turn signal and pull the lens out from that corner the turn the turn signal bulb counter clockwise to release it from the fitting. Reverse the process to complete the installation of the turn signal bulb The process was completed in 5 minutes with no difficultly.* Cost performance and comparison with other products, The price of the Honda turn signal bulb is good if you are just needing to replace a damaged bulb and is your best option but if you are needing mutiple lenses and bulbs together then the blinker lens set from Kitaco is a better option.* About shipping and packaging, I am happy to wait 8 weeks on average for my parts to arrive in Sydney Australia via Webike's sea freight which comes with tracking and insurance so I know I'm covered in case something was to go wrong but with there outstanding bubble wrapping and boxing there have been no problems.* Any concerns, cautions, or advice when purchasing, If you are interested in any other parts for repairs then view the Honda MSX125 (GROM) OEM parts here on Webike. Use the product reviews to assist in making a decision on your purchase.View Detail

* About quality and texture, The tail light base is molded from a black plastic and the tail light lens is molded from a durable red tinted plastic.* About the feeling of use, The tail light unit that was fitted to this Grom was an aftermarket option that looked ok but performed terrible at night. Happy to now have a standard looking Grom tail light unit with enough light output to ride safety at night.* Products to buy together, The head light was another light that was aftermarket and a Honda head light needed to be purchased to pass a road safety inspection.* Difficulty of installation, The installation requires seat removal, disconnecting the tail light electrical connector then unbolting the tail light. Reverse the process to complete the installation with the Honda tail light. The process was completed in 30 minutes with no difficultly.* Cost performance and comparison with other products, The price of the Honda tail light unit is good and you are receiving a tail light that is safe to use at night unlike the cheaper aftermarket tail ights available. If you are wanting a tail light with a different look then I would suggest you need to spend a significant amount more to purchase an aftermarket tail light with a good light output.* About shipping and packaging, I am happy to wait 8 weeks on average for my parts to arrive in Sydney Australia via Webike's sea freight which comes with tracking and insurance so I know I'm covered in case something was to go wrong but with there outstanding bubble wrapping and boxing there have been no problems.* Any concerns, cautions, or advice when purchasing, If you are interested in another parts for repairs then view the Honda MSX125 (GROM) OEM parts here on Webike. Use the product reviews to assist in making a decision on your purchase.View Detail

This is the left side grip which was a necessary part for a bike. I have started rebuilding this CB1100 2014 which requires a lot of genuine Honda parts. I could buy random after market parts but sometimes, you just have to get the genuine ones. I decided on this OEM one as it is with fitting the era of the age of bike I am doing. The part number was not hard to find and also cross referencing with Honda schematics was even easier. Added to my order with a few other parts as well as the right hand side grip. Using EMS all my order was shipped and delivered in 5 days solid. The package was well padded and no damage to any of the parts I ordered. This left hand grip is beautiful. I know it's just a grip but the look on it's own is great and of course the quality is effect as always from Honda. The OEM was definitely the best choice for this bike. The rubberised grip is super sticky and tactile to touch. Fits easily on the 22mm handlebars for the rebuild. There is a ton of flexibility but even with that, it fits spot on. Super happy with this product. Thank you Webike. Absolutely love them. View Detail

These were other part that was for a CBR900RR I got in from a customer. This time it is the front brake pads for the bike as the old ones were well beyond their usage. I did change the rear pads on this service too as they were not the best shape. Usually on these bigger bikes, the front need changing twice as often as the rear anyway but the rear was not changed last service, so it was time. Finding the right ones was easy but checking on EBC's own website pulled up the right ones. Luckily, they had a set in their warehouse and so added to my order. EMS shipped my order and all arrived in perfect condition in 5 days from being shipped. Everything was well padded out in the box so there was no damage. These pads are EBC so I know these are cracking pads for this bike. Plus, the pads do last quite a while, probably longer than these should have as the customer clearly prefers the front brake to the rear. The pad material is even and looks pretty tasty for this big bike. Perhaps not as smoothly sintered as I have previously had but they do have some heavy compound in them. Very happy customer and thank you once again Webike for doing a great job. View Detail

I had a small scratch on one of my decals so decided it was about time to get that changed for my bike to look new again. Finding the correct graphic was not particularly hard using the Yamaha Parts Catalogue. The shipping was good due to the fact I already had other items in my order. From ordering to being delivered was 8 days including a weekend and Webike waiting for the stock to arrive at their warehouse so not bad at all. Upon delivery all the items were very well packaged. I was a little worried that with this decal being flat that there may be issues with it being folded. Nope, this was not the case. It was nestled neatly in the bottom of the box, surrounded by padding. The decal itself looks awesome on and the quality was second to none. Really a flawless decal/graphic and now the bike looks 100%. Thanks for the help Webike, great stuff View Detail

This is the final part for the MT07 cylinder and piston rebuild due to piston ring failure and some help for the owner of the bike. This part was the head cover 1 gasket. The original gasket was in good shape but still, why reuse when Webike sell the new ones for not much outlay. There is no real point in changing just one part when you essentially need the whole kit to do the job right. The part was not hard to find and I used the tools Webike provide and cross referencing with Yamaha schematics. All my parts were shipped together via EMS and arrived with me in perfect condition in 5 days solid. This gasket along with the other cylinder head gasket was kept nice and flat and came on the regular Yamaha cardboard. Webike also wrapped this up well to protect from bends or damage. Perfect as always. The quality is exceptional as I would expect from Yamaha. The tolerance is spot on and no need to worry going forward. Now all the parts are here and in place I can start the big job of the rebuild and finally get this little bike back where it belongs, the open road. Thank you Webike for the great effort you put into every order. Very much appreciated View Detail

This bike, the ZX-6R, a new clutch cable was needed as the existing one was starting to fray. No point in waiting for it to actually snap so this needed replacing fast. After checking on Webike website, I found them to have an absolutely fantastic price, well less than half what they are in the UK from genuine Kawasaki parts dealer. Unfortunately though, the Kawasaki dealer in the UK could not give an estimate of when they would be able to get the parts needed. Not an issue with Webike. As these were part of a larger order with other ZX-6R parts, the shipping was brilliant, not expensive and not too cheap, express delivery is what I went for. From ordering all the different parts in the order to being delivered to my door was literally just 5 days. Including a weekend and the wait time for Webike to source the parts from the different manufacturers. How good is that. Upon receipt, the box was perfect and as Webike package all these very well indeed, nothing was damaged. There was also another layer of padding on top. What more can you ask for. The cable came in it's own Kawasaki packet and was in perfect condition when it arrived. The lug was secure, the cable nicely lubricated so slide through the guide outer easily. Fitting is not difficult on an road bike as not really much gets in the way. Now the clutch feels a whole lot better. Happy days. Great company, great service, great genuine products. 10 out of 10 for Webike. Very happy customer. View Detail