Genuine Yamaha Side Cover 2 (RH) for XT500 1986

As always, satisfied. Top price. Almost everything in stock. Fast processing and very fast shipping. What more could you want... Top performance.View Detail

Not really a big deal but one of the holes for the bolt had decided it was going to give out. The cover was still held in place firmly enough but it was grinding on me, knowing it was not right. After deliberation, I wanted to just get a new one. Webike had these in stock already and the price they have them for is far better than I could source locally at my Yamaha dealership. I found the part number from Yamaha schematics which is a wealth of knowledge to have handy. Along with a few other small parts for the bike, I got them all shipped together. The cost was really good due to stacking parts in the same order. In just 7 days, my order arrived. The box was in tact and sealed by Webike warehouse to keep everything inside. There was a lot of air pockets and bubble wrap to keep everything safe too. The cover came in the standard Yamaha packaging. The cover itself, is a moulded part but you wouldn't guess as there were minimal joints. The colour is exactly the same as the old one and the quality is excellent. Nice and crisp new parts always make me smile. The finish on this cover is a nice sating, almost matt one. The cover is a little flexible as this does help with the rear fins that usually get a bit of a beating from numerous hits with your foot. Anyway, all fitted with brand new bolts and firmly in place. Very pleased with this purchase, thanks Webike View Detail

I had a small scratch on one of my decals so decided it was about time to get that changed for my bike to look new again. Finding the correct graphic was not particularly hard using the Yamaha Parts Catalogue. The shipping was good due to the fact I already had other items in my order. From ordering to being delivered was 8 days including a weekend and Webike waiting for the stock to arrive at their warehouse so not bad at all. Upon delivery all the items were very well packaged. I was a little worried that with this decal being flat that there may be issues with it being folded. Nope, this was not the case. It was nestled neatly in the bottom of the box, surrounded by padding. The decal itself looks awesome on and the quality was second to none. Really a flawless decal/graphic and now the bike looks 100%. Thanks for the help Webike, great stuff View Detail

There were also a few bolts that needed replacing as the heads had damage and were not too pretty looking. I suspect in a short period of time, the head would become unusable so they needed replacing asap. As I know my way around Yamaha schematics, the correct bolts were not hard to locate. The bolt was a really good price so I got a couple of them for spares too. I always have more than one item per order as this cuts down on the amount of shipping in the long run. EMS was my chosen courier and in 5 days my order arrived. All the small parts were well packaged and inside a made up bubble wrap envelope by Webike warehouse. The button head bolts are factory standard and came in the Yamaha packet. The bolt heads are well rounded on the profile and the threaded section is good all around. In the past I have had issues when people use the wrong size to remove these and the head just gets chewed up. It appears that Yamaha have improved these bolts so I am confident this will last a while in the future. Fitting a side cover to the bike and this was a perfect fitment. One less job to do to get this bike back in it's original condition. Thanks Webike View Detail

I was doing a rebuild on an MT10 2018 model and this included a refit and refurb of the side fairing panels. With these fairing panels I needed a lot of different bolts, collars and washers to complete. No point in going for cheap bolts so I decided to go for the genuine Yamaha ones for this model. Luckily, as these are gernerally used bolts on a lot of Yamaha models they were easy enough to find. The price from Webike was really good value. Along ith the washers and collars for this job, they were all shipped at the same time. I use EMS as they just get the order to me fast. In 5 days from being shipped the order arrived. Everything was well packaged and no damage at all. Even the smaller parts were packed in bubble wrap for safety. The quality of these bolts was exceptional. Very well machined and the specification was perfect. No issues with extra machined swarf so this made me happy. Just finding the time now to get all this done so the bike can get back out on the road. Thank you Webike, expertly done.View Detail

One of the hanger pins on this bike was problematic and the cause was that someone had cross threaded it when they were doing some kind of maintenance. There was no simple and easy fix apart from just buying a new one. Simple as that. Finding the right pin was straight forward by checking Honda schematics. The schematics showed the right one and this was then searched for on Webike. Webike price was far better than I could source from my local Honda dealer. You do need 2 of these and even though one was perfectly ok, I decided to just buy 2 at this price. With a few other small parts, I had the entire order shipped using EMS. In just 7 days from being shipped, my order arrived. The pin hangers arrived in a the usual Honda packaging but also inside a bubble wrap envelope that Webike had provided. This meant the threaded sections would no get any damage during transit. The pin hangers a re very well machined and look to be top quality from Honda. The dimensions are the exact same as the one that is pretty good condition. The threaded sections are smooth and clean from any debris. Fitting is just a simple bolt in. The caliper is now fully supported and will continue to be until someone who has no business fixing bikes is concerned. Very pleased with this small purchase, thanks guys View Detail

This was the oil seals for the front wheel the YZF-R3 ABS 2020 which also needed new front wheel bearings and spacer bearing. I do always replace the oil seals when it comes to any bearings where possible for my own peace of mind. It just makes sense to do this. Finding the right oil seal was easy as I already had the schematic open for the front wheel bearings anyway. The price for the new seals was great value. At this price is was silly not to get them. With the other parts needed for this replacement, I had all the order shipped using EMS which are my chosen and trusted courier. My order arrived in 100% perfect condition in 7 days from being shipped. The oil seals came in the standard Yamaha packets and were also inside a nicely made bubble wrap envelope by Webike warehouse to keep them safe. The oil seals are pretty rigid if I am honest but that is not a bad thing. They are top quality oil seals which you expect from such a well respected manufacturer like Yamaha. With a tiny bit of oil to seat them easily, the job was complete and now the front wheel moves freely and smoothly as it should. Great job guys, very pleased with this purchase. View Detail

The second of the replacement brackets for the YZF-R1 2020. The original one was not too bad but as I was replacing all the other brackets for the fairing, I wanted to make sure there was no issues with fitting. Not a big deal but I did want to replace it for one that will hold the fairing well. Finding the right part was easy using the tools Webike provide and cross referencing with Yamaha schematics. The cost was very good value and less than half the cost of buying locally. With some other parts for the R1, I had EMS ship them all together so I would get them all at the same time. In 7 days the order arrived and the parts were perfectly wrapped and kept safe. The bracket itself is aluminium but that does not mean it is not strong, I could barely flex it at all which is good. The bends are all correct and align with the fairing and the engine side. Simple to fit but worth the effort knowing the fairing will stay where it is supposed to . Cheap fix, great part, what more can you want. I also ordered the other brackets so they would all be brand new. View Detail

The water pump had been broken on this YFZ-R6 and needed to be replaced. There were options for aftermarket ones but for the price Webike had, why would you go for anything else. The part was not hard to find as I use Yamaha schematics to track down the correct part number. Webike did have 2 in stock and ready to ship out the next day. I chose EMS and the order was delivered to my door in 7 days from being shipped. The water pump was packaged really well by Webike and there was no damage sustained. The pump itself is a very well cast part, the mount points are perfect, even the inside of the cover is perfect. There were no shards or extra flecks of metal to be seen. Yamaha really do take good care of products when they are removed from the casts. I already purchased a new water pump gasket from Webike at the same time. This made the entire job easier and quicker to do. No pint in only having the new water pump if you do not have a gasket to fit. The quality of this water pump is excellent, I honestly could not ask for any better. The installation along with the gasket took a little over an hour. All sorted, and now the cooling system works a treat. Great work Webike, thank you View Detail

This bracket had clearly too some hit as it had snapped near to the engine side. Not a big deal but I did want to replace it for one that will hold the fairing well. Finding the right part was easy using the tools Webike provide and cross referencing with Yamaha schematics. The cost was very good value and less than half the cost of buying locally. With some other parts for the R1, I had EMS ship them all together so I would get them all at the same time. In 7 days the order arrived and the parts were perfectly wrapped and kept safe. The bracket itself is aluminium but that does not mean it is not strong, I could barely flex it at all which is good. The bends are all correct and align with the fairing and the engine side. Simple to fit but worth the effort knowing the fairing will stay where it is supposed to . Cheap fix, great part, what more can you want. I also ordered the other brackets so they would all be brand new. View Detail