This was another seal that was needed for the CBR1000RR 2014 that came in for a refresh/rebuild. This seal was one the one that seals the water temperature sensor into the thermostat. It was well and truly perished and needed changing out. Finding the right one was pretty easy using the Honda schematics for the CBR1000RR 2014 model. Webike had this on sale at the time of ordering but the price was super cheap anyway. Added to the long list of parts needed for this bike I had them all shipped together. I use EMS as they just get my orders delivered in super fast time. In 5 days the entire order arrived. The packets inside were well packed and protected, including this small washer. Webike put all the really small parts inside a plastic bag to keep them safe and then inside a bubble wrap packet too. The washer is a really neat part and I think stainless steel. It is essentially a crush washer. The specifications were spot on which you would expect anyway from an OEM Honda part. The fitment was perfect and this is one less job to do before getting this bike back on the road. Thank you Webike. View Detail

About quality and texture - The left cylinder head cover from Honda is made from cast aluminium and a black painted surface finish, the quality from the overall fit and finish is perfect.About the feeling of use - The finned design of the left cylinder head cover from the Grom is preferred over the flat design of the left cylinder head cover from the Monkey 125 and the colour change gives the engine some character.Products to buy together - More black parts from the Grom engine like the timing cover and crank cover for the left side of the engine and the clutch cover protector for the right side of the engine would be key products to buy together with the left cylinder head cover to balance the colour change.Difficulty of installation - The installation of the left cylinder head cover is a simple task that took 0.1 of an hour to complete. Common sense and the use of basic hand tools is all that is required to secure the cover to the cylinder head after transferring over the O-ring. Cost performance and comparison with other products - I find the cost of all the products Honda sell to be very reasonable when compared to what some of the other companies sell their products for and the left cylinder head cover is no different.About shipping and packaging - With there being no cost difference between sea freight and EMS for the left cylinder head cover, I chose EMS for an earlier arrival date. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box.Any concerns, cautions, or advice when purchasing - Webike Japan is the first place I look to for all my motorcycle needs. From service parts to performance products and even motorcycle gear and apparel, Webike always seem to satisfy my needs in regards to availability and pricingView Detail

About quality and texture, I can confirm that the quality is great and that the material used is carbon steel.About the feeling of use, Two 10x20mm dowel pins were needed for the new engine that I am building from newly purchased part from Honda. They has done their job aligning the spacer gasket between the crankcase and the cylinder bore.Products to buy together, To be able to complete a new engine build many newly purchased parts are required to be added to your cart but the two most important to go with dowel pins are the two cylinder base gasket and cylinder head gasket as they all form part of the installation.Difficulty of installation, I can say the fitment of the dowel pin for my installation was very easy due to the ease of access and the process is explained in the service manual which require to be positioned in the correct locations as specified.Cost performance and comparison with other products, The pricing of this product is great. You receive an original Honda dowel pin that will be suitable for most engine builds and repairs and and I do not see this being offered any cheaper elsewhere.About shipping and packaging, My order was shipped within 24 hours of the product being in stock and I received a few emails advising me of the status up until the order was dispatched. The order arrived within the estimated date range and was extremely well packaged. I found the link supplied to track my order very useful while I was waiting for the order to land in the country.Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs.View Detail

About quality and texture, I can confirm that the quality is great and that the material used is steel with a zinc coating.About the feeling of use, Two 28mm long stud bolts were needed for the new engine that I am building from newly purchased part from Honda. They has done their job helping to secure the exhaust pipe flange to the exhaust port on the cylinder head.Products to buy together, To be able to complete a new engine build many newly purchased parts are required to be added to your cart but the two most important to go with the stud bolts are the exhaust pipe gasket and the capped nuts as they all work together on the installation.Difficulty of installation, I can say the fitment of the stud bolt for my installation was very easy due to the ease of access and the process is explained in the service manual which is to be tightened to the required torque value using two jam nuts.Cost performance and comparison with other products, The pricing of this product is great. You receive an original Honda stud bolt that will be suitable for most engine builds and repairs and I do not see this being offered any cheaper elsewhere.About shipping and packaging, My order was shipped within 24 hours of the product being in stock and I received a few emails advising me of the status up until the order was dispatched. The order arrived within the estimated date range and was extremely well packaged. I found the link supplied to track my order very useful while I was waiting for the order to land in the country.Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs.View Detail

About quality and texture, I can confirm that the quality is great and that the material used is steel with a zinc coating.About the feeling of use, Three steel sealing washer was needed for the new engine that I am building from newly purchased part from Honda. They has done their job in sealing between the cylinder head nut and the cylinder head.Products to buy together, To be able to complete a new engine build many newly purchased parts are required to be added to your cart but the two most important to go with the steel sealing washer are the cylinder head nuts and flange bolts as they all work together on the installation.Difficulty of installation, I can say the fitment of the steel sealing washer for my installation was very easy due to the ease of access and the process is explained in the service manual which is to be tightened to the required torque value.Cost performance and comparison with other products, The pricing of this product is great. You receive an original Honda steel sealing washer that will be suitable for most engine builds and repairs and I do not see this being offered any cheaper elsewhere.About shipping and packaging, My order was shipped within 24 hours of the product being in stock and I received a few emails advising me of the status up until the order was dispatched. The order arrived within the estimated date range and was extremely well packaged. I found the link supplied to track my order very useful while I was waiting for the order to land in the country.Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs.View Detail

About quality and texture, I can confirm that the quality is great and that the materials used are a combination of cast aluminum for the clutch cover and machined aluminum for the oil filter cover.About the feeling of use, I find the Kitaco clutch cover the best option if you are just looking to add a cartridge oil filter to your Honda Grom. The styling of the clutch cover and all black painted finish is well suited to the rest of the engine.Products to buy together, Adding an adjustable clutch lever to your cart to help personalization your clutch lever setup position woud be ideal.Difficulty of installation, I can say the fitment of the clutch cover kit for my installation was average, there is special tooling needed and the process of removing the unwanted original Honda parts, transferring some over and installing the new Kitaco parts takes some time.Cost performance and comparison with other products, The pricing of this product is great when compared to all the other aftermarket clutch cover kits available because it is a less complex in design and you utilising some of the original clutch cover parts.About shipping and packaging, My order was shipped within 24 hours of the product being in stock and I received a few emails advising me of the status up until the order was dispatched. The order arrived within the estimated date range and was extremely well packaged. I found the link supplied to track my order very useful while I was waiting for the order to land in the country.Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs.View Detail

About quality and texture, I can confirm that the quality is great and that the material used is aluminum that is CNC machined to shape and finished with a silver anodized finish.About the feeling of use, This starter motor cover is of a strong construction with a subtle design and does a wonderful job enhancing the finish and complimenting the other high quality covers on the engine.Products to buy together, Other higher quality parts to help improve the look of other original plain looking parts like the front sprocket cover would be ideal to add to your cart.Difficulty of installation, I can say the fitment of the starter motor cover for my installation was very easy due to the ease of access and simple nature of securing the cover onto the engine using the included hardware.Cost performance and comparison with other products, The pricing of the product is great. You receive a subtle design part made from high quality material with a matching finish. There are other options available but it depends on the design you prefer.About shipping and packaging, My order was shipped within 24 hours of the product being in stock and I received a few emails advising me of the status up until the order was dispatched. The order arrived within the estimated date range and was extremely well packaged. I found the link supplied to track my order very useful while I was waiting for the order to land in the country.Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs.View Detail

About quality and texture, I can confirm that the quality is great and that the material used is steel for all parts of the drive chain and is of a non sealed style chain.About the feeling of use, Perfect introductory priced 420 drive chain for a original engine setup. I find the drive chain requires much less adjustments to keep the recommended chain slack then the original drive chain.Products to buy together, The drive chain system on any typical motorcycle is made up of three parts that ideally are replaced together so it would be good practice to also add a front drive sprocket and rear driven sprocket to your cart.Difficulty of installation, I can say the fitment of the drive chain for my installation was very easy due to the simple process of connecting the drive chain ends with the joining link and open access to the swingarm area.Cost performance and comparison with other products, Pricing of this product is great, You receive a drive chain made from quality and stronger materials. There are no cheaper options with the 420 pitch design that I could find, even the original Honda part is more expensive.About shipping and packaging, My order was shipped within 24 hours of the product being in stock and I received a few emails advising me of the status up until the order was dispatched. The order arrived within the estimated date range and was extremely well packaged. I found the link supplied to track my order very useful while I was waiting for the order to land in the country.Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs.View Detail

About quality and texture, I can confirm that the quality is great and that the material used is S45C steel which is a high carbon steel resulting in a lighter and harder wearing part.About the feeling of use, A better looking and performing driven sprocket then the original Honda part which is the perfect choice for my Monkey 125 with the power the original engine is outputting.Products to buy together, The drive chain system on any typical motorcycle is made up of three parts that ideally are replaced together so it would be good practice to also add a front drive sprocket and drive chain to your cart.Difficulty of installation, I can say the fitment of the driven sprocket for my installation was average due to the access required but simple in nature of placing the sprocket into the hub and securing with the locking nuts.Cost performance and comparison with other products, The pricing of the product is great. You receive a sprocket made from quality and light weight material. There are no cheaper options with the lightweight design that I could find, even the original Honda part is more expensive.About shipping and packaging, My order was shipped within 24 hours of the product being in stock and I received a few emails advising me of the status up until the order was dispatched. The order arrived within the estimated date range and was extremely well packaged. I found the link supplied to track my order very useful while I was waiting for the order to land in the country.Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs.View Detail

About quality and texture, I can confirm that the quality is great and that the material used is a soft rubber that is firm yet flexiable when positioning.About the feeling of use, This larger diameter connecting tube is the only way to help connect between the original air cleaner box and the Takegawa big throttle body and I find I can still achieve my performance goals while retaining the original air cleaner box for everyday use.Products to buy together, If you are looking to get every bit of performance out of the original air cleaner box then it would be ideal to add the large diameter air duct for the inlet to your cart also.Difficulty of installation, I can say the fitment of the larger diameter connecting tube for my installation was average due to having to remove the air cleaner box for access to enlargen the hole for the tube to fit in place.Cost performance and comparison with other products, The pricing of the product is great. You receive a larger diameter connecting tube made from quality rubber that is designed to allow you to retain the original air cleaner box with a Takegawa big throttle body.About shipping and packaging, My order was shipped within 48 hours of the product being in stock and I received a few emails advising me of the status up until the order was dispatched. The order arrived within the estimated date range and was extremely well packaged. I found the link supplied to track my order very useful while I was waiting for the order to land in the country.Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs.View Detail