GILD Rear Caliper holder for Brembo P2 rear brake

About quality and textureMade of smooth aluminium texture. Feels good solid able to take impact without scratches.About the feeling of useAble to charge the watch without restriction. The magnet is of the charger can attach strongly. Straps of the watch are easier to remove compare with the older designs.Products to buy togetherMay need to buy a screen protector as it doesn’t come with one. But so far, I have used the same brand for my previous iWatches no issues with it without screen protector.Design to be able to take knocks without damaging the screenDifficulty of installationNo issues with installing with just four screws. But the rubber cushions may take time to install as it is very small.May not be essential to install them but better to, as an additional protection to the watch and help to hold the watch more stable.Cost performance and comparison with other productsCost a bit more then the common protective cases in market but few of them are made in the same material and designed with precision.About shipping and packagingComes with a box inside item is well protected with sponges and the box is bubble wrap by Webike.Any concerns, cautions, or advice when purchasingI prefer silver as the colour will not fade easily over time. And it has a more classic design compare with the other colours available. And I able to match with a classic metal band.View Detail

About quality and textureThe pull-out drink mechanism is made from plastic with spring back action.The back support of the drink holder is made from metal for good back support.The mount is metal material with plastic mount protector for your bars.About the feeling of useGood strong spring back action for the drink holder.I can put other items similar size as the drink. For example, a portable battery chargerProducts to buy togetherA bottle about less then a litre will be fine.Bottle or item size less the 9 CM will be fine.Difficulty of installationLess then 10 mins to install the item. The mount diameter is big. I try to mount on my crash bar have to install it without the plastic protector. But in the end I mount it on the passenger footpeg holder.But might have issue if want to mount on smaller diameter bar as not given various sizes protector.Cost performance and comparison with other productsPrice is reasonable compared to other brands. As its from Daytona.About shipping and packagingItem is box with plastic holder to prevent movement of the item. The box is well bubble wrap by WEBIKE.Any concerns, cautions, or advice when purchasingThe mount protector is not made of rubber instead it is made from plastic. May query about the ability of protection.Different size of protectors should be provided as well.View Detail

About quality and textureThe lock feels solid and not easy to temper with. Made by stainless steel, I guess.The wire is thick and not easy to temper with. The thickness of the wire is about 1CM.About the feeling of useI mount it on my handlebar. I turn it opposite upside down as I’m afraid when unlocking the lock might hit other parts of the motorcycle.It still works perfectly when it turned too.Products to buy togetherI opted for the item with wire as its only cost a bit more. The wire quality is good for the price.Difficulty of installationTook only about less then 10 minutes. Rubber protection is given to prevent scratches on the item mount.Cost performance and comparison with other productsDid not compare other similar brands but Daytona items are reasonable priced usually.About shipping and packagingWell bubble wrapped by WEBIKE, item itself comes with a box with plastic holder to secure item.Any concerns, cautions, or advice when purchasingThe lock numbers are abit difficult to see as it’s a bit small and with reflective background. Maybe it’s my eyesight problem ^^”,View Detail

About quality and textureWell made brushed polished aluminium container. The quality feels good as I believe is made in Japan.About the feeling of useLooks great without the plastic container and bracket popping out look. Looks more cleaner without it sticking out. Lesser distraction.Products to buy togetherI fitted on my RCS coracorta 17mm brake pump.Difficulty of installationIt took a while for my mechanic to figure out and took about an hour the most. Cost performance and comparison with other productsPrice and quality is justifiable. Even though we have a more expensive brand which just doesn't make sense in the price.About shipping and packagingWell bubble wrapped with all the items. Smaller items are inside a small ziplock bag. No issues when I received the item.Any concerns, cautions, or advice when purchasingThe top cap cannot be using other brands I guess. There's no window in the container to view the brake fluid level. But still there's no leakage when I using it so far. View Detail

About quality and textureFine great aluminium texture from moriwaki. The brand word is laser scanned I guess. It won't fades overtime. About the feeling of useThe color fits my motorcycle overall color. I didn't bought my favourite brand as the colors didn't fit the outlook. So I opted for a different brand this time.Difficulty of installationOnly took me less than 10 minutes to install it. I can use back the stock screws as it's not provided one. Can be installed in either direction as I prefer the wording faces outside.Cost performance and comparison with other productsPrice is slightly lower then the more expensive ranges. But there are cheaper brands around with the same fit. But still I prefer this range. About shipping and packagingItem is in a box. Comes with a sticker from the brand. We bike will bubble wrap the box. No issues when I receive the item. Any concerns, cautions, or advice when purchasingIt's fit to my Suzuki GX even the brand didn't mentioned. The dimensions are the same and it fits exactly. View Detail