Brembo P2 rear caliper

About quality and texture - The P4 right brake caliper from Brembo is made from cast aluminium with a titanium anodized surface finish and includes brake pads, the quality from the overall fit and finish is perfect.About the feeling of use - The P4 right brake caliper is initially overwhelming to look at on the minimoto with it's massive physical appearance but soon becomes part of the Monkey 125 with it's titanium finish that matches the rest of styling so well, not to mention the improved feel and braking performance with it's larger diameter pistons and higher quality brake pads.Products to buy together - The Honda Monkey 125 is an inexpensive motorcycle with a lot of low quality parts from the factory, so the purchasing of other high quality parts like this P4 right brake caliper from Brembo would be perfect but the essential product to purchase to complete the installation is a front brake bracket to allow for the meshing together of the Brembo brake caliper and the Honda lower fork leg.Difficulty of installation - The installation of the P4 right brake caliper is a intermediate task that took 0.7 of an hour to complete. Some mechanical aptitude and the use of basic hand tools is what is required to secure the P4 right brake caliper to the bracket and bleed the brake caliper.Cost performance and comparison with other products - I find the cost of all the products Brembo sell to be higher then what most other companies sell their products for and the P4 right brake caliper is no different, but this is due to the high quality materials used and the consistent high quality finish of their products.About shipping and packaging - With there being no significant cost difference between sea freight and EMS for the P4 right brake caliper, I chose EMS for an earlier arrival dates. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box.Any concerns, cautions, or advice when purchasing - For my location, purchasing performance products like this from Webike Japan is the only option. There are a few local stores selling parts for the Grom but the range is very limited.View Detail

I am very satisfied with this product. It's a great product because it's so beautiful. The Brembo brake is a very good product. Delivery is also very fastView Detail

Nice quality and reasonably priced item. I highly recommend this. It will work well with my Hunter Cub. I hope you drive safely and have an enjoyable motor life.View Detail

These calipers are a superb piece of art. They are a perfect fit on the H2 and provides a good bling on a rather dark bike. Performance is great coupled with a RCS CorsaCorta. Its a pricey product but if you are only wanting a caliper for an average performance, the other calipers like GP4RX or Stylema do an equally good job. View Detail

This was my absolutelly bades experience with shopping in internet. The Brempo P4 was more than 2 months on the way. Webike did only say look on the tracking, no more help. The article was 4 weeks in customs in frankfurt, many email an phones later ist was shipped to other customs and i have to start discussion here again. Then a lot of taxes for customs and import-taxes and i have to take a customs-specialist to do the import-process. At the end it was much expensive than in Germany.No good support from Webike and also Paypal could not help.I would say dont buy here!!View Detail

About quality and textureSoft PVC material with beautiful red sitches embroided on it. The cushion is softer but still firm the the stock seat.About the feeling of useMy bottom feels a bit tighter but no numbness feeling compared to the stock seat. I'm able to ride longer around 30 minutes to an hour or more without needed to stand. The passenger seat side tends to slide down to the rider. But it may not due to the seat material used.Products to buy togetherI bought a SW Motech rear seat bag. And it's able to fit at the passenger seat side.Difficulty of installationEasy direct replacement on both the passenger and rider side. The rider seat feels a bit hard to push in the seat initially. But after a while of sitting on it should be fine.Cost performance and comparison with other productsCost it's cheaper then the premium brands available on the market. Well made and the price is affordable even with shipping.About shipping and packagingThe passenger seat and the rider seat comes with a plastic cover which you can use for to keep the old stock seats. Both items are bubbled wrapped. Comes with a box from Suzuki.Any concerns, cautions, or advice when purchasingNo issues with the item so far. View Detail

About quality and textureMade of smooth aluminium texture. Feels good solid able to take impact without scratches.About the feeling of useAble to charge the watch without restriction. The magnet is of the charger can attach strongly. Straps of the watch are easier to remove compare with the older designs.Products to buy togetherMay need to buy a screen protector as it doesn’t come with one. But so far, I have used the same brand for my previous iWatches no issues with it without screen protector.Design to be able to take knocks without damaging the screenDifficulty of installationNo issues with installing with just four screws. But the rubber cushions may take time to install as it is very small.May not be essential to install them but better to, as an additional protection to the watch and help to hold the watch more stable.Cost performance and comparison with other productsCost a bit more then the common protective cases in market but few of them are made in the same material and designed with precision.About shipping and packagingComes with a box inside item is well protected with sponges and the box is bubble wrap by Webike.Any concerns, cautions, or advice when purchasingI prefer silver as the colour will not fade easily over time. And it has a more classic design compare with the other colours available. And I able to match with a classic metal band.View Detail

About quality and textureThe pull-out drink mechanism is made from plastic with spring back action.The back support of the drink holder is made from metal for good back support.The mount is metal material with plastic mount protector for your bars.About the feeling of useGood strong spring back action for the drink holder.I can put other items similar size as the drink. For example, a portable battery chargerProducts to buy togetherA bottle about less then a litre will be fine.Bottle or item size less the 9 CM will be fine.Difficulty of installationLess then 10 mins to install the item. The mount diameter is big. I try to mount on my crash bar have to install it without the plastic protector. But in the end I mount it on the passenger footpeg holder.But might have issue if want to mount on smaller diameter bar as not given various sizes protector.Cost performance and comparison with other productsPrice is reasonable compared to other brands. As its from Daytona.About shipping and packagingItem is box with plastic holder to prevent movement of the item. The box is well bubble wrap by WEBIKE.Any concerns, cautions, or advice when purchasingThe mount protector is not made of rubber instead it is made from plastic. May query about the ability of protection.Different size of protectors should be provided as well.View Detail

About quality and textureThe lock feels solid and not easy to temper with. Made by stainless steel, I guess.The wire is thick and not easy to temper with. The thickness of the wire is about 1CM.About the feeling of useI mount it on my handlebar. I turn it opposite upside down as I’m afraid when unlocking the lock might hit other parts of the motorcycle.It still works perfectly when it turned too.Products to buy togetherI opted for the item with wire as its only cost a bit more. The wire quality is good for the price.Difficulty of installationTook only about less then 10 minutes. Rubber protection is given to prevent scratches on the item mount.Cost performance and comparison with other productsDid not compare other similar brands but Daytona items are reasonable priced usually.About shipping and packagingWell bubble wrapped by WEBIKE, item itself comes with a box with plastic holder to secure item.Any concerns, cautions, or advice when purchasingThe lock numbers are abit difficult to see as it’s a bit small and with reflective background. Maybe it’s my eyesight problem ^^”,View Detail

About quality and textureWell made brushed polished aluminium container. The quality feels good as I believe is made in Japan.About the feeling of useLooks great without the plastic container and bracket popping out look. Looks more cleaner without it sticking out. Lesser distraction.Products to buy togetherI fitted on my RCS coracorta 17mm brake pump.Difficulty of installationIt took a while for my mechanic to figure out and took about an hour the most. Cost performance and comparison with other productsPrice and quality is justifiable. Even though we have a more expensive brand which just doesn't make sense in the price.About shipping and packagingWell bubble wrapped with all the items. Smaller items are inside a small ziplock bag. No issues when I received the item.Any concerns, cautions, or advice when purchasingThe top cap cannot be using other brands I guess. There's no window in the container to view the brake fluid level. But still there's no leakage when I using it so far. View Detail