Obviously way better then the original units with there

Item well recieved and delivery was fast recived it within 2-3 Weeks. Overall good purchase OHLINS suspension feels great! View Detail

About quality and texture - The rear suspension from Ohlins is made from billet aluminium with detailed machining featuring gold and silver anodized surface finishes, the quality from the overall fit and finish is perfect.About the feeling of use - If you want your upgraded suspension to be noticed by others then Ohlins is the brand to purchase. The rear suspension is obviously way better then the original unit with it's heavier rated spring, preload adjusting collars and compression/rebound damping adjustment knobs and the looks when fitted to the Grom with it's matching gold front forks are just ridiculously good.Products to buy together - The Honda Grom is an inexpensive motorcycle with a lot of low quality parts from the factory, so the purchasing of other high quality parts like this rear suspension from Ohlins would be perfect and the essential product to purchase to complete your suspension upgrade would be the Ohlins front fork insert kit but sadly Webike Japan do not have this product available but you can purchase it from Webike Thailand.Difficulty of installation - The installation of the rear suspension is a intermediate task that took 1.5 hours to complete. Mechanical aptitude, knowledge on disassembling the Honda Grom and the use of basic hand tools is what is required to secure the rear suspension between the frame and the swingarm, then position the remote reservoir as desired.Cost performance and comparison with other products - I find the cost of all the products Ohlins sell to be higher then what most other companies sell their products for and the rear suspension is no different, but this is due to the high quality materials used and the consistent high quality finish of their products.About shipping and packaging - With there being no option for sea freight or EMS for the rear suspension, I had to chose FEDEX which is priced higher then I like to usually spend on shipping. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box.Any concerns, cautions, or advice when purchasing - Webike Japan is the first place I look to for all my motorcycle needs. From service parts to performance products and even motorcycle gear and apparel, Webike always seem to satisfy my needs in regards to availability and pricing.View Detail

기존에도 올린즈를 사용하였으나 국내에서 구 모델은 오버홀이 불가하다 하여구매하였습니다, 페덱스라 관세를 피할순 없었으나 제품이 매우 맘에 들며, ZRX400의 경우 기본적으로 마후라를 탈거 후 장착해야하나잘만 하면 마후라 탈거를 하지않더라도 장착이 가능합니다 View Detail

For streets performance and track use. Value for money. Good product. Item as per discribe Installation is quite simple.View Detail

The Ohlins HO819 Rear Shocks for the Honda Monkey 125 are a game-changer for ride quality and performance. Known for their premium construction, these shocks feature adjustable preload, compression, and rebound damping, allowing for a customized ride tailored to various conditions. The improvement in handling and stability is immediately noticeable, providing a smoother and more controlled ride. I would suggest upgrading the front suspension at the same time however.View Detail

About quality and texture - The X-Beam connecting rod crankshaft from SP Takegawa is made from forged steel with a shot-peened surface finish, the quality from the overall fit and finish is perfect.About the feeling of use - The X-Beam connecting rod crankshaft install has been on my to do list for a while now and I am relieved to now have it fitted along side my top end big bore kit.Products to buy together - A key product to buy together with the X-Beam connecting rod crankshaft is the crankshaft support adapter that SP Takegawa also sell, this will add support the left side of the crankshaft and reduce vibration.Difficulty of installation - The installation of the X-Beam connecting rod crankshaft is an advanced task that took many hours to complete due to the extensive disassembly of the engine. Mechanical aptitude and the use of special tooling and basic hand tools is what is required to secure the X-Beam connecting rod crankshaft to the crankcase.Cost performance and comparison with other products - I find the cost of all the products SP Takegawa sell to be on par when compared to what most other companies sell their products for and the X-Beam connecting rod crankshaft is no different.About shipping and packaging - With there being no significant cost difference between sea freight and EMS for the X-Beam connecting rod crankshaft, I chose EMS for a earlier arrival date. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box. Any concerns, cautions, or advice when purchasing - Webike Japan is the first place I look to for all my motorcycle needs. From service parts to performance products and even motorcycle gear and apparel, Webike always seem to satisfy my needs in regards to availability and pricing.View Detail

About quality and texture - This 61mm piston from Endurance is made from aluminium using forged and machining processes, the quality from the overall fit and finish is perfect.About the feeling of use - Specifically for the Endurance bored cylinder this larger 61mm displacement piston is the key to adding usable power to the low RPM range over the original 125cc 2-valve engine setup.Products to buy together - A key product to buy together with this 61mm piston is a camshaft designed to help the engine achieve higher RPMs.Difficulty of installation - The installation of the 61mm piston is an advanced task that took 2.0 hour to complete, with the gapping and alignment of the piston rings taking quite some time. Mechanical aptitude and the use of basic hand tools is what is required to secure the piston to the crankshaft and fit it into the cylinder before re-assembling the head and cam chain system.Cost performance and comparison with other products - I find the cost of all the products Endurance sell to be on great value when compared to what most other companies sell their products and the 61mm piston is no different.About shipping and packaging - With there being no significant cost difference between sea freight and EMS for the 61mm piston I chose EMS for an earlier arrive date. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box.Any concerns, cautions, or advice when purchasing - Webike Japan is the first place I look to for all my motorcycle needs. From service parts to performance products and even motorcycle gear and apparel, Webike always seem to satisfy my needs in regards to availability and pricing.View Detail

About quality and texture - The air filter oval taper 46 mm from SP Takegawa is made from a dry multi-layered cotton gauze filter with a metal top and rubber base, the quality from the overall fit and finish is perfect.About the feeling of use - The heart behind my custom air filter install. Large in it's design that is perfect for maximizing the air intake with it's larger then normal filter surface area. The metal chrome finished top is a nice touch. Products to buy together - Another product to purchase when looking to further increase the performance would be a full exhaust system, which when paired together will allow for a freer air flow through the engine.Difficulty of installation - The installation of the air filter oval taper 46 mm is a simple task that took 0.7 of an hour complete. Some mechanical aptitude and the use of basic hand tools is what is required to gain aceess, remove the original air box and secure the air filter oval taper 46 mm to the throttle body inlet tube.Cost performance and comparison with other products - I find the cost of all the products SP Takegawa sell to be on par when compared to what most other companies sell their products for and the air filter oval taper 46 mm is no different.About shipping and packaging - With there being no cost difference between sea freight and EMS for the air filter oval taper 46 mm, I chose EMS for an earlier arrive date. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box.Any concerns, cautions, or advice when purchasing - Webike Japan is the first place I look to for all my motorcycle needs. From service parts to performance products and even motorcycle gear and apparel, Webike always seem to satisfy my needs in regards to availability and pricing.View Detail

About quality and texture - The slim seat from Kitaco is made using fiberglass for the seat base and a synthetic tuck and roll material for the seat cover with white edges, the quality from the overall fit and finish is perfect.About the feeling of use - Aftermarket seats will not be as comfortable as the original Honda seat, but this one is not bad. The look of the seat is impressive and easily adds a custom build look on the Monkey 125 while the seat comfort is quite good as th seat is slim and flat making it easy to move around. Products to buy together - If you are looking to enhance the custom build look, a product you may want to consider to purchase along side the slim seat is a front fender lowing kit as I feel the original high front fender position does not go as well with it's design.Difficulty of installation - The installation of the slim seat is a simple task that took 0.3 of an hour to complete. Some slight mechanical aptitude and the use of basic hand tools is all that is required to secure the slim seat to the frame.Cost performance and comparison with other products - I find the cost of all the products Kitaco sell to great value when compared to what most other companies sell their products for but the slim seat is priced higher this time.About shipping and packaging - With there being a significant cost difference between sea freight and EMS for the slim seat, I chose sea freight to put the saved money toward other parts. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box.Any concerns, cautions, or advice when purchasing - Webike Japan is the first place I look to for all my motorcycle needs. From service parts to performance products and even motorcycle gear and apparel, Webike always seem to satisfy my needs in regards to availability and pricing.View Detail

About quality and texture - The right side cover set from Yoshimura is made from 100% ABS with a yellow gloss paint and the quality from the overall fit and finish is perfect.About the feeling of use - This right side cover set is a nice step up from just purchasing the cheap steel plate right side cover for the low mount exhaust on my Monkey 125. Purely a cosmetic addition for filling the space left from removing the original high mount exhaust. Products to buy together - The Honda Monkey 125 has no billet aluminum parts fitted from the factory, so the purchasing of other high quality parts like the right side cover set from Yoshimura would be perfect. More billet aluminum to replace the factory parts is what I would recommend.Difficulty of installation - The installation of the right side cover set is a simple task that took 0.5 hour to complete. Some slight mechanical aptitude and the use of basic hand tools is what is required to secure the side cover.Cost performance and comparison with other products - I find the cost of all the products Yoshimura sell to be higher then what most other companies sell their products for and the right side cover set is no different, but this is due to the high quality materials used and the consistent high quality finish of their products.About shipping and packaging - With there being minimal cost difference between sea freight and EMS for the right side cover set, I chose EMS for an earlier arrival date. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box.Any concerns, cautions, or advice when purchasing - For my location purchasing Tyga Performance products from Webike Japan is the best option when taking into account the shipping cost but depending on where you live you may be better off purchasing from Webike Thailand due to the much lower product pricing.View Detail