?
I purchased this guard after the bike skidded. Although it was a minor mishap without any injuries. I damaged the brake lever and it didn't brake as smoothly as it originally did.Moving forward, I decided that if I happen to tip over the bike or have any mishaps, this brake lever guard was going to bear the brunt of the impact. When I unboxed it, the feel of it and build quality impressed me and indeed could see where the cost went to. I wanted to buy a clutch lever guard but unfortunately Yoshimura did not make them. It would have completed the look.I would recommend this product to someone who wish to protect their bike from those accidental tip over scenarios.
Fits: SUZUKI GSX-S1000F 15-20 Φ16, SUZUKI GSX-S1000 15-21 Φ16, SUZUKI GSX-R125 18-23 M6X12.5 washer and M6 bolt (40mm) are required separately. Therefore, either Φ14 or Φ16 size can be installed., SUZUKI GSX-R1000 16 Φ16
Aluminum gives points to each color. And it can also protect the brakes when the bike falls. You have to buy a clutch guard or a handle Accessory Bar Ends because it only consists of a brake guard. Installation is easy as long as it fits the size. Delivery and packaging to WeBike in a week The packaging is expensive because it only costs a great brake guard. However, the quality is highView Detail
Fits: SUZUKI GSX-S1000F 15-20 Φ16, SUZUKI GSX-S1000 15-21 Φ16, SUZUKI GSX-R125 18-23 M6X12.5 washer and M6 bolt (40mm) are required separately. Therefore, either Φ14 or Φ16 size can be installed., SUZUKI GSX-R1000 16 Φ16
The brake lever guard looks sleek and material are of high quality expected from yoshimura. Sadly they don't make a clutch lever guard too. It would be great if they have it so it would look symmetrical on the bike.View Detail
Fits: SUZUKI GSX-S1000F 15-20 Φ16, SUZUKI GSX-S1000 15-21 Φ16, SUZUKI GSX-R125 18-23 M6X12.5 washer and M6 bolt (40mm) are required separately. Therefore, either Φ14 or Φ16 size can be installed., SUZUKI GSX-R1000 16 Φ16
铝合金加工部分工艺层次感、阳极氧化色彩都非常漂亮。护弓前段是塑料，考虑到轻量化和可替换性，工艺处理不是很好脱模间隙的毛边会有一点显眼，完美主义者请手动抛光去毛边。种类丰富的配件，因为是川崎厂型号，使用M8原装螺栓安装就可以了。The layering and anodized colors of the aluminum alloy processing are very beautiful. The front section of the bow is made of plastic. Considering the light weight and replaceability, the process is not very good. The burrs of the demolding gap will be a little more conspicuous. Perfectionists please manually polish the burrs. A wide range of accessories, because it is a Kawasaki factory model, it can be installed using M8 original bolts.translated by Google TranslatorView Detail
Fits: SUZUKI GSX-S1000F 15-20 Φ16, SUZUKI GSX-S1000 15-21 Φ16, SUZUKI GSX-R125 18-23 M6X12.5 washer and M6 bolt (40mm) are required separately. Therefore, either Φ14 or Φ16 size can be installed., SUZUKI GSX-R1000 16 Φ16
I tried several other companies' products, but they came loose due to vibration during driving, so I used Lever Guard The only thing I thought was that it was not a good idea for a Not only is it good, but it feels solid and Large satisfied with the installation
However, if possible, the Bar End on the Clutch Side is also a YOSHIMURAOnLine only Quantity, not sales:I'd like to see it sold as a setView Detail
Fits: SUZUKI GSX-S1000F 15-20 Φ16, SUZUKI GSX-S1000 15-21 Φ16, SUZUKI GSX-R125 18-23 M6X12.5 washer and M6 bolt (40mm) are required separately. Therefore, either Φ14 or Φ16 size can be installed., SUZUKI GSX-R1000 16 Φ16
New ModelKATANA with a Handlebar EndSET for GSX-R [OnLineShop exclusive] It was installed together with
I thought the price might be too high, but it doesn't seem to be too expensive compared to other companies' products
[Was there anything that disappointed you?
None
Do you have any wishes or improvements you would like to make for the Manufacturer?
In the introduction image of the official website, the SilverSpacer 10mm is not installed, and the actual I was a little confused when I saw the finished product *See the attached image for an example of my installation
[Do you have any products to compare it to?
None
What made you decide to buy?
Because it is described on the page of KATANACustom of YOSHIMURA
OthersRadiator core guard etc. are also available at Yoshimura Because
How was your experience with it?
It's very cool looking
Originally, these are the Parts for Race, but they are also the Parts for Dress-up at YOSHIMURA Logo and Anodized Color with good color
Because the Inner Weight and Bar End of the NORMAL have a fair amount of weight, the replacement of I was worried about the increased vibration, but there was no problem
Was the installation difficult?
The installation itself didn't take long, although I'm not sure of the level of difficulty since I asked for it at the Pro Shop
【Please tell me the installation point and hang】
BlackSpacer15mm and SilverSpacer10mm are included It depends on the Brake you are using and its adjustment range, but you can also Offset it I like it because it can be adjusted from 120mm to 145mm with the resin arm
In the case of New Model Katana's NORMALBrake, you can install both Spacers and There was no problem with the 120mm width of the resin arm
There is a bit of interference when pushing it forward when adjusting the brake, but it's not a problem for normal driving at all
[Was the Instruction Manual easy to understand?
It's reasonably difficult for those who don't do much work on their own, including myself
[Included Parts:were they on?
Logo sticker is Quantity:1pc. included
[Others]
The outer box is gorgeous and full of premium feel
It's not listed as a compatible model in Webig, but you can see it in the official Yoshimura website It is listed as a compatible product and can be installed with confidence
The Size of KATANA is Φ16View Detail
THE LARGEST
SHOP IN JAPAN
EXCLUSIVE COUPONS,
SALE, DEALS
FAST, RELIABLE
SHIPPING