About quality and texture, I can confirm that the quality is great and that the materials used are a combination of a black coloured ABS (Acrylonitrile Butadiene Styrene) plastic for the coil housing, a black soft rubber tubing for the sleeve and a black 7mm diameter wiring for the ignition lead. About the feeling of use, I was sceptical of there being any improvements when I purchased this product and am happy to report that on the first ride there was a noticeable improvement in throttle response. From that experience I have to assume that the product is delivering an improved discharge voltage for the best combustion condition at all RPM ranges as advertised. Products to buy together, Some new spark plugs from NGK preferably would be ideal to also add to your cart when purchasing the hyper ignition coil so you are maximising the chance of obtaining the best possible spark for your new setup. Difficulty of installation, I can say the fitment of the hyper ignition coil for my installation was average, the nature of the task is simple but access to the part on the Grom does demand the removal of fairings to complete the task. Cost performance and comparison with other products, The pricing of this Takegawa ignition coil is great and much more affordable then other upgraded ignition coils but more expensive then an original replacement. About shipping and packaging, My order was shipped within 48 hours of me placing the order and I received a few emails advising me of the status up until the order was dispatched. I find the link supplied to track my order very useful and the order arrived within the estimated date range. Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs.View Detail

I want my baby Honda Chaly to become more cheerful. I took a chance and purchased an ignition coil from SP TAKEGAWA, despite the fact that my baby was not on the list of applicable models. Upon arrival of the new coil, I found that the old coil is structurally different and has a single connection wire. I made an additional wire, which I shorted to the body and the new coil started working. Now my baby is cheerful and cheerful...View Detail

About quality and texture - The hyper ignition coil from SP Takegawa is made from injection molded plastic with a red surface finish, the quality from the overall fit and finish is perfect. About the feeling of use - Just another small part that helps improves engine performance over the original part. The hyper ignition coil is worth the expense for the stronger engine feeling through the entire RPM range.Products to buy together - A key product to purchase when upgrading the ignition system is a spark plug cap to complete the hyper ignition coil installations as this part does not come complete ready for use.Difficulty of installation - The installation of the hyper ignition coil is an simple task that took 0.5 of an hour complete. Some mechanical aptitude and the use of basic hand tools is what is required to secure the hyper ignition coil directly to the frame.Cost performance and comparison with other products - I find the cost of all the products SP Takegawa sell to be on par when compared to what most other companies sell their products for and the hyper ignition coil is no different.About shipping and packaging - With there being no cost difference between sea freight and EMS for the hyper ignition coil, I chose EMS for an earlier arrive date. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box.Any concerns, cautions, or advice when purchasing - Webike Japan is the first place I look to for all my motorcycle needs. From service parts to performance products and even motorcycle gear and apparel, Webike always seem to satisfy my needs in regards to availability and pricing.View Detail

About quality and texture - The hyper ignition coil from SP Takegawa is made from injection molded plastic with a red surface finish, the quality from the overall fit and finish is perfect. About the feeling of use - Just another small part that helps improves engine performance over the original part. The hyper ignition coil is worth the expense for the stronger engine feeling through the entire RPM range. Products to buy together - A key product to purchase when upgrading the ignition system is a spark plug cup to complete the hyper ignition coil installations as this part does not come complete ready for use. Difficulty of installation - The installation of the hyper ignition coil is an simple task that took 0.5 of an hour complete. Some mechanical aptitude and the use of basic hand tools is what is required to secure the hyper ignition coil directly to the frame. Cost performance and comparison with other products - I find the cost of all the products SP Takegawa sell to be on par when compared to what most other companies sell their products for and the hyper ignition coil is no different. About shipping and packaging - With there being no cost difference between sea freight and EMS for the hyper ignition coil, I chose EMS for an earlier arrive date. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box. Any concerns, cautions, or advice when purchasing - Webike Japan is the first place I look to for all my motorcycle needs. From service parts to performance products and even motorcycle gear and apparel, Webike always seem to satisfy my needs in regards to availability and pricing.View Detail

Super easy install. The ignition coil looks to be good quality. My 23' grom starts right up ever since the installation. View Detail

The gasket is needed when replacing the clutch. I bought the original so that there would be no force majeure during installation. I installed it, everything went fine.View Detail

I bought these grips because of the color and shape. I've been wanting grips of this color for a long time - the color of the seat, though they're a little lighter, but they look good. Their shape is plump and it has become more convenient to hold the steering wheel than when using regular grips.View Detail

It's time to change the old clutch. I love this company, so I bought a new clutch from this company. The installation did not cause any problems. Everything is working fine. I recommend it to everyone.View Detail

A set of gaskets is always needed when using a motorcycle. I took it in reserve, I will use it as needed. Some have already established that the quality is excellent.View Detail

It's time to change the chain - I bought a chain from this company. They always work great, they last for a long time. For beauty, I also took a silver color. I recommend it to everyone. Take it and you won't regret it.View Detail