I installed the screw for my Simpson M30 helmet, its looking great, while the original screw has some rust issues, the the kameco screw fitted nicely. Suits the helmet well. View Detail

The material itself is really good, durable. I would like yo buy more if i have too next time, its a good replacement for your Simson Helmet if you miss the screw.View Detail

I bought a Diamond back at Sale so I purchased kemeko's Shield fixing BilletScrew.

【What made you decide the purchase?】
The purpose of purchase is two

- Improved appearance
- The attached Pivot screw has poor accuracy and is difficult to detach

is.
Especially the standard Pivot screw felt broken if the accuracy was bad and the feel of tightening was bad and it had been tightened or loosened many times.
Since Helmet is a practical item, you must do it if it gets dirty. It is a purchase of being pressed for necessity because it is not possible to install and dismantle every time after all.

【How was it actually used?】
Compared to the included Pivot screw, the accuracy is good so we will go into the Screw hole with a slurry.
It seems easy to relax by that amount, so it's a good idea to lightly check the slack before Touring.

【Mounting was difficult?】
Standard Pivot screw for coin etc etc. Coin counterclockwise to remove it, just tighten the BilletScrew clockwise to fix it.

【Please tell me the installation point and hang】
When turning with too much force when fixing, it will lead to breakage of Shield or Screw hole, so be careful.

[Is there anything I was disappointed about?]
nothing special.

【Hope for Manufacturer - Please let me know if you have any improvement points]
nothing special.

【Have you compared items?】
- The company's BilletScrew Red
Since it gets up nearly 1000 yen just because it is colored, we made it cheaper Plain this time.

[Others]
Although some price is stretched, a little investment will increase the sense of quality.
This Screw and Smokeor Mirror shield should absolutely be installed when purchasing Simpson's Helmet.
This time I made it Plain color because of the budget, but it was a pleasant miscalculation that I got a luxury feeling better than the one that was badly anodized if I actually wear it.
Moreover, as accuracy as Screw is good, it also plays a part in improving Maintenance ability required as a practical article, so it is a gem that I really recommend for those who use Simpson's Helmet with Fleece top mechanism.View Detail

I bought it with Simpson M30.
Original Plus ticky - Material - Spec. Although it is not bad, I bought it because I used Gold around parts of Motorcycle. Small さ な パ ッ ツ Demonstration Ali, I think I am upgraded but the luxury feel has improved.View Detail

About quality and textureGreat quality again from Yoshimura. Solid texture with light material used for making this product.About the feeling of useI got the clutch side of the protector so might as well get the engine side to make the Yoshimura complete look.Products to buy together.As mentioned, I bought the Clutch side engine protector. So highly recommended to have the other side to complete the look and better protection.Difficulty of installationPretty easy to install, as it took my mechanic about less then 20 mins to install the protector.Cost performance and comparison with other productsThe price is slightly higher compared to other brands in the market. But still worth it as it looks wonderful and great protection for the motorcycle.About shipping and packagingWell box with the brown paper wrap on the product. The box looks great but kind of thin, but Webike took extra precaution to bubble wrap the product is its ok.Any concerns, cautions, or advice when purchasingNo concern about the product so far. The product has a minimize look for protection compare to other brands, but I trust Yoshimura for its quality.View Detail

About quality and textureGreat material from Yoshimura once again. I bought it second time for my other Suzuki Katana. It come with a replaceable side slider. About the feeling of useLooks great to match my Yoshimura look for the bike. I haven't encountered any accidents on it. But I'm sure it's measured with great precision by the company.Products to buy togetherI bought the other side engine cover to match the look.Difficulty of installationNo issues when installing. Just remove the OEM screws and fix it with the given one.Cost performance and comparison with other productsIt's a bit expensive compared to the other brands but if it's be yoshimura you can guarantee the quality.About shipping and packagingShipping is reasonable as item box is less than 30 cm. Well wrapped with protective brown paper in the box.Any concerns, cautions, or advice when purchasingNo issues.View Detail

About quality and textureGreat material from Yoshimura once again. Non plastic like the OEM one. Made of aluminium coloured. My is blue in color.About the feeling of useLooks great on the bike. Not my first time buying. I bought for my Suzuki Katana too.Products to buy togetherI bought the other engine cover protectors just to much the yoshimura look.Difficulty of installationUsing the same rubber gasket as the oem one. No issue installing it.Cost performance and comparison with other productsIt's a bit more pricey. But nothing beats yoshimura itemsAbout shipping and packagingShipping is cheap as item is small in size.Any concerns, cautions, or advice when purchasingMaybe when removing and installing try to use a plastic to cover the item so that it won't scratch or decolonize it.View Detail

About quality and textureGreat quality as the usual for BABYFACE. Matt color crash bobbling attached at the end.About the feeling of useI fitted on my SUZUKI GSXS-1000GX 2024 model. No issues when fitting it in my motorcycle. Difficulty of installationIt take less than 20 minutes to fit. Simple and straightforward. Cost performance and comparison with other productsCost is almost the same as the usual other brands available. No official other brands available for my motorcycle model. So I choose the more stable brand like BABYFACE.About shipping and packagingCame with plastic wrap and free BABYFACE sticker. No issues when receiving the item.Any concerns, cautions, or advice when purchasingIt originally fits on the GSXS-1000GT model. But no issue when fitting to my GSXS-1000GX 2024 model. View Detail

About quality and textureExcellent quality from hepco and becker. Minimize look. Unlike the other brands which covers the side of the top fairing which will hinder the look of the bike. I'm sure it has the same maximum protection if the motorcycle is drop and skidded.About the feeling of useSatisfied with the look. Good matt painting in black.Products to buy togetherIf possible buy the sliding pads with is available too.Difficulty of installationIt took about 45 to 60 minutes to install. It took a longer time on the left side the other side should be straight forward. Make sure the centre part of is aligned properly before securing all the screws. Cost performance and comparison with other productsPrice is more expensive then the other brands on the market. But the brand is know for best protection. So I'm willing to pay a bit more for it. About shipping and packagingWill packed with box and bubble wrapped. Shipping will be a bit expensive because item is a bit big.Any concerns, cautions, or advice when purchasingThickness of the bar will be the same as the usual brands. Bar pads if you are considering to fit on the bar will need a shorter one if you can find. I tried to fix Daytona crash pad but it's too long. View Detail